Issue 3/2013
Content (18 Articles)
Enhanced model of load distribution along the line of contact for non-standard involute external gears
Miryam B. Sánchez, Miguel Pleguezuelos, José I. Pedrero
Analytical and experimental investigation on friction of non-conformal point contacts under starved lubrication
Fadi Ali, Ivan Křupka, Martin Hartl
Effect of magnetic field and non-homogeneity on the radial vibrations in hollow rotating elastic cylinder
A. M. Abd-Alla, G. A. Yahya, S. R. Mahmoud
Centreline velocity decay characterisation in low-velocity jets downstream from an extended conical diffuser
X. Grandchamp, A. Van Hirtum, X. Pelorson
On the hyperbolicity of a model with 30 moments for ultrarelativistic gases
F. Borghero, F. Demontis, S. Pennisi
Load and rheometric unit for the test of magnetorheological fluid
Ivan Mazůrek, Jakub Roupec, Milan Klapka, Zbyněk Strecker
Series solutions for steady three-dimensional stagnation point flow of a nanofluid past a circular cylinder with sinusoidal radius variation
Saeed Dinarvand, Reza Hosseini, Ebrahim Damangir, Ioan Pop
Two-dimensional modeling of heterogeneous structures using graded finite element and boundary element methods
H. Ashrafi, K. Asemi, M. Shariyat, M. Salehi
Development of a model for the analysis of wheel wear in railway vehicles
J. Auciello, M. Ignesti, L. Marini, E. Meli, A. Rindi
Steady state thermal and mechanical stresses of a poro-piezo-FGM hollow sphere
M. Jabbari, S. Karampour, M. R. Eslami
Open Access
Mechanical, rheological, fatigue, and degradation behavior of PLLA, PGLA and PDGLA as materials for vascular implants
Magdalena Bartkowiak-Jowsa, Romuald Będziński, Anna Kozłowska, Jarosław Filipiak, Celina Pezowicz
Experimental methodology for the tappet characterization of timing system in I.C.E.
G. Sequenzia, S. M. Oliveri, M. Calì