Top

Published in:

2022 | OriginalPaper | Chapter

Theoretical and Experimental Studies of the Properties of Porous Permeable Materials Obtained from Industrial Waste

Authors : Oleksandr Povstyanoy, Nataliya Imbirovich, Valentyna Tkachuk, Rostyslav Redko, Olga Priadko

Published in: Advances in Design, Simulation and Manufacturing V

Publisher: Springer International Publishing

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

This article theoretically and experimentally investigates the scientific and technical problem of using multilayer porous permeable materials from industrial waste with controlled functional and technological characteristics by predicting the composition, structure, properties using computer information technology. These porous permeable materials (PPM) from industrial waste are suitable for the purification of technical liquids and gases, which has increased the efficiency of using products in various fields of mechanical engineering. The method of computer modeling proposed by the authors will allow not only to determine the porosity distribution of the filter material but also to determine the relationship between technological and structural parameters. The results of this scientific work are used to develop porous permeable products - filters - for the purification of technical, industrial water, lubricants, and fuels from mechanical impurities contaminants. Developed multilayer porous permeable materials have a higher coefficient of permeability, resource, and dirt capacity with similar single-layer.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 340 Zeitschriften

aus folgenden Fachgebieten:

Bauwesen + Immobilien
Business IT + Informatik
Finance + Banking
Management + Führung
Marketing + Vertrieb
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

previous chapter An Increase in Tribocharacteristics for Highly Loaded Friction Units of Modern Equipment

next chapter Development of Materials Science Virtual Laboratory Work for the Metal Grains Calculation

Budnik, A.F., Rudenko, P.V., Berladir, КV., Budnik, O.A.: Structured nanoobjects of polytetrafluoroethylene composites. J. Nano- Electron. Phys. 7(2), 02022 (2015)

Berladir, K., Gusak, O.: Influence of mechanically activated fillers of different chemical nature on tribotechnical properties of PTFE-composites. In: Tonkonogyi, V., et al. (eds.) InterPartner 2019. LNME, pp. 395–404. Springer, Cham (2020). https://doi.org/10.1007/978-3-030-40724-7_40CrossRef

Povstyanoy, O., Zabolotnyi, O., Rud, V., Kuzmov, A., Herasymchuk, H.: Modeling of processes for creation new porous permeable materials with adjustable properties. In: Ivanov, V., et al. (eds.) DSMIE 2019. LNME, pp. 456–465. Springer, Cham (2020). https://doi.org/10.1007/978-3-030-22365-6_46CrossRef

Xi, Z.P., Tang, H.P.: Sintered Metal Porous Material. Metallurgical Industry Press, Beijing (2009)

Bruno, G., Efremov, A.M., Levandovskyi, A.N.: Connecting the macro- and microstrain responses in technical porous ceramics: Modeling and experimental validations. J. Mater. Sci. 46(1), 161–173 (2020)CrossRef

Bejan, A., Dincer, I., Lorente, S., Miguel, A.F., Reis, A.H.: Porous and Complex Flow Structures in Modern Technologies, vol. 1, pp. 90–99. Springer, Heidelberg (2014). https://doi.org/10.1007/978-1-4757-4221-3

Chern, M., Vaziri, N.: Effect of porous media on hydraulic jump characteristics by using smooth particle hydrodynamics method. Int. J. Civ. Eng. 18, 367–379 (2020)CrossRef

Hunyadi Murph, S.E., Jacobs, S., Siegfried, M., Hu, T., Serkiz, S., Hudson, J.: Manganese-doped «gold nanoparticles as positive contrast agents for magnetic resonance imaging (MRI)». J. Nanopart. Res. 14, 658–659 (2012)CrossRef

Jonsson, P., Jonsen, P., Andreasson, P., Lundstrom, T.S., Hellstrom, J.G.: Smoothed particle hydrodynamic modelling of hydraulic jumps: bulk parameters and free surface fluctuations. Engineering 8, 386–402 (2016)CrossRef

10.

Faisal, A.A.H., Sulaymon, A.H., Khaliefa, Q.M.: A review of permeable reactive barrier as passive sustainable technology for groundwater remediation. Int. J. Environ. Sci. Technol. 15(5), 1123–1138 (2017). https://doi.org/10.1007/s13762-017-1466-0CrossRef

11.

Lagae, A., Dutré, P.: A Comparison of methods for generating Poisson disk distributions. Comput. Graph. 27(1), 114–129 (2018)

12.

McMillan, A., Jones, R., Peng, D., Chechkin, G.A.: A computational study of the influence of surface roughness on material strength. Meccanica 53(9), 2411–2436 (2018). https://doi.org/10.1007/s11012-018-0830-6MathSciNetCrossRef

13.

Pylypaka, S., Nesvidomin, V., Volina, T., Sirykh, L., Ivashyna, L.: Movement of the particle on the internal surface of the spherical segment rotating about a vertical axis. INMATEH Agric. Eng. 62(3), 79–88 (2020). https://doi.org/10.35633/inmateh-62-08CrossRef

14.

Pylypaka, S., Volina, T., Hryshchenko, I., Rybenko, I., Sydorenko, N.: Dynamics of a particle on a movable wavy surface. In: Tonkonogyi, V., et al. (eds.) InterPartner 2020. LNME, pp. 196–206. Springer, Cham (2021). https://doi.org/10.1007/978-3-030-68014-5_20CrossRef

15.

Nurkanov, E.Y., Kadushnikov, R.M., Kamenin, I.G., Alievsky, D.M., Kartashov, V.V.: Study of the density characteristics of three-dimensional stochastic packages of spherical particles using a computer model. Powder Metall. 5(6) (2001)

16.

Rusaґk, Z., Horvaґth, I., Mandorli, F.: Towards multi-domain knowledge transfer in engineering analyses and simulations based on virtual prototypes. Eng. Comput. 29(3), 247–250 (2013)CrossRef

17.

Pavlenko, I., Liaposhchenko, A., Ochowiak, M., Demyanenko, M.: Solving the stationary hydroaeroelasticity problem for dynamic deflection elements of separation devices. Vibr. Phys. Syst. 29, 2018026 (2018)

18.

Crnkovic, G.D.: Information and Computation nets. Investigations into info-computational world. In: Information and Computation, pp. 91–96. Verlag, Saarbrucken (2019)

19.

Povstyanoy, O., Sychuk, V., Makmyllan, A., Rud, V., Zabolotnyy, O.: Metallographic analysis and processing of images of microstructure of nozzles for sandblasting which are made by powder metallurgy. Powder Metall. 3(4), 234–240 (2015)CrossRef

20.

Pavlenko, I., Ivanov, V., Gusak, O., Liaposhchenko, O., Sklabinskyi, V.: Parameter identification of technological equipment for ensuring the reliability of the vibration separation process. In: Knapcikova, L., Balog, M., Perakovic, D., Perisa, M. (eds.) 4th EAI International Conference on Management of Manufacturing Systems. EICC, pp. 261–272. Springer, Cham (2020). https://doi.org/10.1007/978-3-030-34272-2_24CrossRef

21.

Chernysh, Y., Plyatsuk, L., Roubik, H., Yakhnenko, O., Skvortsova, P., Bataltsev, Y.: Application of technological solutions for bioremediation of soils contaminated with heavy metals. J. Eng. Sci. 8(2), H8–H16 (2021). https://doi.org/10.21272/jes.2021.8(2).h2CrossRef

22.

Saadatfar, M., et al.: Imaging of metallic foams using X-ray micro-CT. Colloid Surf. Physicochem. Eng. Aspect 344(1), 107–112 (2009). https://doi.org/10.1016/j.colsurfa.2009.01.008CrossRef

23.

Sidi Practical Extrapolation Methods: Theory and Applications. Cambridge Monographs on Applied and Computational Mathematics. Cambridge (2002)

24.

Shyberko, V., Rud, V.: Modelling of structural and inhomogeneous materials based on the finite element method. Actual Prob. Econ. APE, 124–130 (2013)

Title: Theoretical and Experimental Studies of the Properties of Porous Permeable Materials Obtained from Industrial Waste
Authors: Oleksandr Povstyanoy
Nataliya Imbirovich
Valentyna Tkachuk
Rostyslav Redko
Olga Priadko
Publisher: Springer International Publishing
Book: Advances in Design, Simulation and Manufacturing V
Print ISBN: 978-3-031-06024-3

Electronic ISBN: 978-3-031-06025-0

Copyright Year: 2022
DOI: https://doi.org/10.1007/978-3-031-06025-0_51

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Springer Professional "Wirtschaft"

Premium Partners