nach oben

Erschienen in:

2020 | OriginalPaper | Buchkapitel

Parameter Identification of Technological Equipment for Ensuring the Reliability of the Vibration Separation Process

verfasst von : Ivan Pavlenko, Vitalii Ivanov, Oleksandr Gusak, Oleksandr Liaposhchenko, Vsevolod Sklabinskyi

Erschienen in: 4th EAI International Conference on Management of Manufacturing Systems

Verlag: Springer International Publishing

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

In this paper, ways for the improvement of technological equipment realizing the separation process in the oil and gas industry are considered. The refined mathematical model of dropping liquid motion is proposed in a two-dimensional formulation. Using the proposed design scheme, the kinematic parameters of the dropping fluid motion in a plane channel limited by two walls are considered. The model is based on the generalized Tchen’s equations with the correction of Corrsin–Lumley. As a result of integration for the given initial conditions, analytical dependencies for the velocity components are obtained, considering the nonstationary velocity components of the gas flow. Based on the obtained dependencies using the probabilistic approach, expressions for determining the rational geometry of the operating channel are obtained for ensuring the reliability of the vibration separation process. Particularly, an effective zone of vibration impact was found. Finally, the step of gutters and their effective width are determined to ensure the capture of the most amount of dropping liquid.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 340 Zeitschriften

aus folgenden Fachgebieten:

Bauwesen + Immobilien
Business IT + Informatik
Finance + Banking
Management + Führung
Marketing + Vertrieb
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel Adaptive Assembly Approach for E-Axles

Nächstes Kapitel Optimizing Component Production with Multi-axis Turning Technology

Tarleton, E. S., & Wakeman, R. J. (2007). Solid/liquid separation: equipment selection and process design. Netherlands: Elsevier Ltd.CrossRef

Kaijaluoto, S., Sorsamaki, L., Aaltonen, O., & Nakari-Setala, T. (2010). Bark-based biorefinery – From pilot experiments to process model. In AIChE Annual Meeting, Conference Proceedings (Vol. 83459).

Gulsoy, O. Y., & Gulcan, E. (2019). A new method for gravity separation: Vibrating table gravity concentrator. Separation and Purification Technology, 211, 124–134. https://doi.org/10.1016/j.seppur.2018.09.074.CrossRef

Zhang, G., Willemin, A. S., Brion, A., Piet, M. H., Moby, V., Bianchi, A., Mainard, D., Galois, L., Gillet, P., & Rousseau, M. (2016). A new method for the separation and purification of the osteogenic compounds of nacre ethanol soluble matrix. Journal of Structural Biology, 196(2), 127–137. https://doi.org/10.1016/j.jsb.2016.03.016.CrossRef

Xu, Y., Wang, X., Cui, Z., Dong, F., & Yan, Y. (2010). Separation of gas-liquid two-phase flow through independent component analysis. IEEE Transactions on Instrumentation and Measurement, 59(5), 1294–1302.CrossRef

Ling, K., Wu, X., Guo, B., & He, J. (2013). New method to estimate surface-separator optimum operating pressures. Oil and Gas Facilities, 2(3), 65–76. https://doi.org/10.2118/163111-PA.CrossRef

Zhou, E., Zhang, Y., Zhao, Y., Luo, Z., Yang, X., Duan, C., Dong, L., & Fu, Z. (2018). Effect of vibration energy on fluidization and 1–6 mm coal separation in a vibrated dense medium fluidized bed. Separation Science and Technology, 53(14), 2297–2313. https://doi.org/10.1080/01496395.2018.1445757.CrossRef

Wang, S., Yang, Y., Yang, X., Zhang, Y., & Zhao, Y. (2019). Dry beneficiation of fine coal deploying multistage separation processes in a vibrated gas-fluidized bed. Separation Science and Technology, 54(4), 655–664. https://doi.org/10.1080/01496395.2018.1505917.CrossRef

Liaposhchenko, О. О., Sklabinskyi, V. I., Zavialov, V. L., Pavlenko, I. V., Nastenko, O. V., & Demianenko, M. M. (2017). Appliance of inertial gas-dynamic separation of gas dispersion flaws in the curvilinear convergent-divergent channels for compressor equipment reliability improvement. In IOP Conference Series: Materials Science and Engineering (Vol. 233, p. 012025). https://doi.org/10.1088/1757-899X/233/1/012025.CrossRef

10.

Tarelnyk, V., Martsynkovskyy, V., & Dziuba, A. (2014). New method of friction assemblies reliability and endurance improvement. Applied Mechanics and Materials, 630, 388–396. https://doi.org/10.4028/www.scientific.net/AMM.630.388.CrossRef

11.

Liaposhchenko, O., Pavlenko, I., Demianenko, M., Starynskyi, O., & Pitel, J. (2019). The methodology of numerical simulations of separation process in SPR-separator. In CEUR Workshop Proceedings (Vol. 2353, pp. 822–832).

12.

Pavlenko, I., Liaposhchenko, A., Ochowiak, M., & Demyanenko, M. (2018). Solving the stationary hydroaeroelasticity problem for dynamic deflection elements of separation devices. Vibrations in Physical Systems, 29, 1–7.

13.

Pylypaka, S., Klendiy, M., & Zaharova, T. (2019). Movement of the particle on the external surface of the cylinder, which makes the translational oscillations in horizontal planes. In Advances in Design, Simulation, Manufacturing. DSMIE-2018. Lecture Notes in Mechanical Engineering (pp. 336–345), https://doi.org/10.1007/978-3-319-93587-4_35

14.

Liaposchenko, O., Pavlenko, I., & Nastenko, O. (2017). The model of crossed movement and gas-liquid flow interaction with captured liquid film in the inertial-filtering separation channels. Separation and Purification Technology, 173, 240–243. https://doi.org/10.1016/j.seppur.2016.08.042.CrossRef

15.

Sklabinskyi, V., Liaposhchenko, O., Pavlenko, І., Lytvynenko, O., Demianenko, M. (2019). Modelling of liquid’s distribution and migration in the fibrous filter layer in the process of inertial-filtering separation. In Advances in Design, Simulation, Manufacturing. DSMIE-2018. Lecture Notes in Mechanical Engineering (pp. 489–497), https://doi.org/10.1007/978-3-319-93587-4_51

16.

Plyatsuk, L. D., Ablieieva, I. Y., Vaskin, R. A., Yeskendirov, M., & Hurets, L. L. (2018). Mathematical modeling of gas-cleaning equipment with a highly developed phase contact surface. Journal of Engineering Sciences, 5(2), F19–F24. https://doi.org/10.21272/jes.2018.5(2).f4.CrossRef

17.

Araujo, A. F., Varela, M. L. R., Gomes, M. S., Barreto, R. C. C., & Trojanowska, J. (2018). Development of an intelligent and automated system for lean industrial production, adding maximum productivity and efficiency in the production process. In Advances in Manufacturing. Lecture Notes in Mechanical Engineering (pp. 131–140), https://doi.org/10.1007/978-3-319-68619-6_13.

18.

Pavlenko, I., Liaposhchenko, O., Sklabinskyi, V., Ivanov, V., & Gusak, O. (2018). Hydrodynamic features of gas-liquid flow movement in a separation device plane channel with an oscillating wall. Problemele Energeticii Regionale, 3(38), 62–70. https://doi.org/10.5281/zenodo.2222360.CrossRef

19.

Feng, J. (2010). A deformable liquid drop falling through a quiescent gas at terminal velocity. Journal of Fluid Mechanics, 658, 438–462. https://doi.org/10.1017/S0022112010001825.CrossRefMATH

20.

Yadav, M. P., & Agarwal, R. (2019). Numerical investigation of fractional-fractal Boussinesq equation. Chaos, 29, 013109. https://doi.org/10.1063/1.5080139.MathSciNetCrossRefMATH

21.

Kambe, T. (2017). New scenario of turbulence theory and wall-bounded turbulence: Theoretical significance. Geophysical and Astrophysical Fluid Dynamics, 111(6), 448–507. https://doi.org/10.1080/03091929.2017.1376055.MathSciNetCrossRef

22.

John, V. (2016). The Oseen equations. Finite element methods for incompressible flow problems (Vol. 51, pp. 243–300). Cham: Springer Series in Computational Mathematics. https://doi.org/10.1007/978-3-319-45750-5_5.CrossRef

23.

Parmar, M., Haselbacher, A., & Balachandar, S. (2011). Generalized Basset–Boussinesq–Oseen equation for unsteady forces on a sphere in a compressible flow. Physical Review Letters, 106, 084501. https://doi.org/10.1103/PhysRevLett.106.084501. CrossRef

24.

Chouippe, A., & Uhlmann, M. (2019). On the influence of forced homogeneous-isotropic turbulence on the settling and clustering of finite-size particles. Acta Mechanica, 230(2), 387–412. https://doi.org/10.1007/s00707-018-2271-7.MathSciNetCrossRef

25.

Petersen, A. J., Baker, L., & Coletti, F. (2019). Experimental study of inertial particles clustering and settling in homogeneous turbulence. Journal of Fluid Mechanics, 864, 925–970. https://doi.org/10.1017/jfm.2019.31.CrossRef

26.

Chun, J., Koch, D., Rani, S., Ahluwalia, A., & Collins, L. (2005). Clustering of aerosol particles in isotropic turbulence. Journal of Fluid Mechanics, 536, 219–251. https://doi.org/10.1017/S0022112005004568.MathSciNetCrossRefMATH

27.

Kelbaliev, G. I., Ibragimov, Z. I., & Kasimova, R. K. (2010). Deposition of aerosol particles in vertical channels from an isotropic turbulent flow. Journal of Engineering Physics and Thermophysics, 83(5), 908–916. https://doi.org/10.1007/s10891-010-0413-4.CrossRef

28.

Cencini, M., Bec, J., Biferale, L., Boffetta, G., Celani, A., Lanotte, A. S., Musacchino, S., & Toschi, F. (2019). Dynamics and statistics of heavy particles in turbulent flows. Journal of Turbulence, 7, 36. https://doi.org/10.1080/14685240600675727.CrossRefMATH

29.

Arakawa, K. (2016). Dynamic sliding friction and similarity with Stokes’ law. Tribology International, 94, 77–81. https://doi.org/10.1016/j.triboint.2015.08.007.CrossRef

30.

Rosen, T. (2014). The influence of inertia on the rotational dynamics of spheroidal particles suspended in shear flow. Stockholm: Royal Institute of Technology.

31.

Daitche, A. (2015). On the role of the history force for inertial particles in turbulence. Journal of Fluid Mechanics, 782, 567–593. https://doi.org/10.1017/jfm.2015.551.MathSciNetCrossRefMATH

32.

Armand, A., Allahviranloo, T., & Gouyandeh, Z. (2016). General solution of Basset equation with Caputo generalized Hukuhara derivative. Journal of Applied Analysis and Computation, 6(1), 119–130. https://doi.org/10.11948/2016010.MathSciNetCrossRef

33.

Edwards, J. T., Ford, N. J., & Simpson, A. C. (2002). The numerical solution of linear multi-term fractional differential equations: Systems of equations. Journal of Computational and Applied Mathematics, 148(2), 401–418. https://doi.org/10.1016/S0377-0427(02)00558-7.MathSciNetCrossRefMATH

34.

Gomez-Lopez, A., Ferrer, V. H., Rincon, E., Aguayo, J. P., Chavez, A. E., & Vargas, R. O. (2019). Large-amplitude oscillatory shear flow simulation for a FENE fluid. Rheologica Acta, 58(1), 241–260.CrossRef

Titel: Parameter Identification of Technological Equipment for Ensuring the Reliability of the Vibration Separation Process
verfasst von: Ivan Pavlenko
Vitalii Ivanov
Oleksandr Gusak
Oleksandr Liaposhchenko
Vsevolod Sklabinskyi
Verlag: Springer International Publishing
Buch: 4th EAI International Conference on Management of Manufacturing Systems
Print ISBN: 978-3-030-34271-5

Electronic ISBN: 978-3-030-34272-2

Copyright-Jahr: 2020
DOI: https://doi.org/10.1007/978-3-030-34272-2_24

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Springer Professional "Wirtschaft"

Premium Partner