Issue 13/2011
Content (35 Articles)
On the Correlation Between Fatigue Striation Spacing and Crack Growth Rate: A Three-Dimensional (3-D) X-ray Synchrotron Tomography Study
Jason J. Williams, Kyle E. Yazzie, N. Connor Phillips, Nikhilesh Chawla, Xinghui Xiao, Francesco De Carlo, Nagaraja Iyyer, Maddan Kittur
Characterization of Ferrite in Tempered Martensite of Modified 9Cr-1Mo Steel Using the Electron Backscattered Diffraction Technique
C. R. Das, S. K. Albert, A. K. Bhaduri, B. S. Murty
Segregation Characteristics of Pulsed Laser Butt Welding of Hastelloy C-276
Guangyi Ma, Dongjiang Wu, Dongming Guo
Wear Behavior of the Lead-Free Tin Bronze Matrix Composite Reinforced by Carbon Nanotubes
Jun Zeng, Huiqing Fan, Yangli Wang, Siquan Zhang
Initial-stage Sintering Kinetics of Nanocrystalline Tungsten
Ajeet K. Srivastav, M. Sankaranarayana, B. S. Murty
Foreword: Modeling, Simulation, and Theory of Nanomechanical Materials Behavior
T. Buchheit, L. H. Friedman, S. Medyanik, D. Spearot, E. B. Webb III
Effects of Vacancies on the Onset of Plasticity in Metals—An Atomistic Simulation Study
I. Salehinia, S. N. Medyanik
Critical Strengths for Slip Events in Nanocrystalline Metals: Predictions of Quantized Crystal Plasticity Simulations
Lin Li, Myoung-Gyu Lee, Peter M. Anderson
On Homogeneous Nucleation of Dislocation Loops in Nanocrystalline Materials
Yuri Estrin, Vincent Lemiale, Robert O’donnell, Laszlo Toth
Hierarchical Silica Nanostructures Inspired by Diatom Algae Yield Superior Deformability, Toughness, and Strength
Andre P. Garcia, Dipanjan Sen, Markus J. Buehler
Multiscale Model for the Extreme Piezoresistivity in Silicone/Nickel Nanostrand Nanocomposites
Oliver K. Johnson, Calvin J. Gardner, Daniel B. Seegmiller, Nathan A. Mara, Andrew M. Dattelbaum, Philip J. Rae, George C. Kaschner, Thomas A. Mason, David T. Fullwood, George Hansen
Mpemba-Like Behavior in Carbon Nanotube Resonators
P. Alex Greaney, Giovanna Lani, Giancarlo Cicero, Jeffrey C. Grossman
On Prediction of Amorphous Phase Forming Compositions in the Iron-Rich Fe-Zr-B Ternary System and Their Synthesis
B. Ramakrishna Rao, A. K. Shah, M. Srinivas, J. Bhatt, A. S. Gandhi, B. S. Murty
Development of New High-Strength Carbide-Free Bainitic Steels
S. Sharma, S. Sangal, K. Mondal
Evolution of Precipitate Microstructure During Creep of an AA7449 T7651 Aluminum Alloy
G. Fribourg, Y. Bréchet, J. L. Chemin, A. Deschamps
Solute Behavior in the Initial Nucleation of V- and Nb-Containing Carbide
Q. D. Liu, W. Q. Liu, S. J. Zhao
In-Situ Fracture Observation and Fracture Toughness Analysis of Ni-Mn-Ga-Fe Ferromagnetic Shape Memory Alloys
Kwangjun Euh, Jung-Moo Lee, Duk-Hyun Nam, Sunghak Lee
Quantitative Measurements of Grain Boundary Sliding in an Ultrafine-Grained Al Alloy by Atomic Force Microscopy
Jung H. Han, Farghalli A. Mohamed
Crack Propagation During Sustained-Load Cracking of Al-Zn-Mg-Cu Aluminum Alloys Exposed to Moist Air or Distilled Water
N. J. Henry Holroyd, G. M. Scamans
Effect of Austempering on Plastic Behavior of Some Austempered Ductile Iron Alloys
Jakob Olofsson, Dan Larsson, Ingvar L. Svensson
A Revised Criterion for the Portevin–Le Châtelier Effect Based on the Strain-Rate Sensitivity of the Work-Hardening Rate
Peter Van Liempt, Jilt Sietsma
Welding-Induced Microstructure Evolution of a Cu-Bearing High-Strength Blast-Resistant Steel
Jeremy L. Caron, Sudarsanam Suresh Babu, John C. Lippold
Weldability Evaluation of a Cu-Bearing High-Strength Blast-Resistant Steel
Jeremy L. Caron, Sudarsanam Suresh Babu, John C. Lippold
Quantitative Evaluation of Bulk and Interface Microstructures in Al-3003 Alloy Builds Made by Very High Power Ultrasonic Additive Manufacturing
Hiromichi T. Fujii, M. R. Sriraman, S. S. Babu
A Comparison of Residual Stress Development in Inertia Friction Welded Fine Grain and Coarse Grain Nickel-Base Superalloy
N. Iqbal, J. Rolph, R. Moat, D. Hughes, M. Hofmann, J. Kelleher, G. Baxter, P. J. Withers, M. Preuss
Effect of Cyclic Oxidation Exposure on Tensile Properties of a Pt-Aluminide Bond-Coated Ni-Base Superalloy
Md. Zafir Alam, N. Hazari, Vijay K. Varma, Dipak K. Das
Preparation and Light Transmission Properties of AlON Ceramics by the Two-Step Method with Nanosized Al2O3 and AlN
Jianqi Qi, Yuezhong Wang, Tiecheng Lu, Yin Yu, Lei Pan, Nian Wei, Jun Wang
Estimation of Melt Pool Dimensions, Thermal Cycle, and Hardness Distribution in the Laser-Engineered Net Shaping Process of Austenitic Stainless Steel
V. D. Manvatkar, A. A. Gokhale, G. Jagan Reddy, A. Venkataramana, A. De
Interfacial Microstructure and Bonding Strength of Copper Cladding Aluminum Rods Fabricated by Horizontal Core-Filling Continuous Casting
Ya-Jun Su, Xin-Hua Liu, Hai-You Huang, Xue-Feng Liu, Jian-Xin Xie
AlNiYCo Amorphous Matrix Composites Induced by Bismuth and Lead Additions
Jie He, Hongxiang Jiang, Jiuzhou Zhao, Norbert Mattern, Jürgen Eckert
Influence of Microstructure on Microhardness of Fe81Si4B13C2 Amorphous Alloy after Thermal Treatment
Dragica M. Minić, Vladimir A. Blagojević, Dušan M. Minić, Aleksandra Gavrilović, Lidija Rafailović, Tomaš Žak
Effects of Additives and Impurity on the Adhesive Behavior of the NiAl(110)/Al2O3 (0001) Interface: An Ab Initio Study
Isil Ozfidan, Kuiying Chen, Ming Fu
Modeling of Microporosity Size Distribution in Aluminum Alloy A356
Lu Yao, Steve Cockcroft, Jindong Zhu, Carl Reilly