Top

Journal of Materials Engineering and Performance

Published in:

21-12-2017

Tribological Properties of Surface-Textured and Plasma-Nitrided Pure Titanium Under Oil Lubrication Condition

Authors: Baosen Zhang, Qiangsheng Dong, Zhixin Ba, Zhangzhong Wang, Hancheng Shi, Yanting Xue

Published in: Journal of Materials Engineering and Performance | Issue 1/2018

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

Plasma nitriding was conducted as post-treatment for surface texture on pure titanium to obtain a continuous nitriding layer. Supersonic fine particles bombarding (SFPB) was carried out to prepare surface texture. The surface morphologies and chemical composition were analyzed using scanning electron microscope and energy disperse spectroscopy. The microstructures of modified layers were characterized by transmission electron microscope. The tribological properties of surface-textured and duplex-treated pure titanium under oil lubrication condition were systematically investigated in the ball-on-plate reciprocating mode. The effects of applied load and sliding velocity on the tribological behavior were analyzed. The results show that after duplex treatments, the grains size in modified layer becomes slightly larger, and hardness is obviously improved. Wear resistance of duplex-treated pure titanium is significantly improved referenced to untreated and surface-textured pure titanium, which is 3.22 times as much as untreated pure titanium and 2.15 times of that for surface-textured pure titanium, respectively.

previous article Research on Oxidation Wear Behavior of a New Hot Forging Die Steel

next article Effect of Applied Load and Sliding Speed on Tribological Behavior of TiAl-Based Self-Lubricating Composites

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

R.K. Gupta, V.A. Kumar, and S. Chhangani, Study on Variants of Solution Treatment and Aging Cycle of Titanium Alloy Ti6Al4V, J. Mater. Eng. Perform., 2016, 25, p 1492–1501CrossRef

F. Sun, J.Y. Zhang, M. Marteleur, C. Brozek, E.F. Rauch, M. Veron, P. Vermauta, P.J. Jacques, and F. Prima, A New Titanium Alloy with a Combination of High Strength, High Strain Hardening and Improved Ductility, Scr. Mater., 2015, 94, p 17–20CrossRef

X. Xu, J. Han, C. Wang, and A. Huang, Laser Cladding of Composite Bioceramic Coatings on Titanium Alloy, J. Mater. Eng. Perform., 2016, 25, p 656–667CrossRef

M. Keddam and S. Taktak, Characterization and Diffusion Model for the Titanium Boride Layers Formed on the Ti6Al4V Alloy by Plasma Paste Boriding, Appl. Surf. Sci., 2017, 399, p 229–236CrossRef

Q. Wang, Q. Sun, L. Xiao, and J. Sun, Effect of Surface Nanocrystallization on Fatigue Behavior of Pure Titanium, J. Mater. Eng. Perform., 2016, 25, p 241–249CrossRef

C.W. Chan, S.H. Lee, G. Smith, G. Sarri, C.H. Ng, A. Sharba, and H.C. Man, Enhancement of Wear and Corrosion Resistance of Beta Titanium Alloy by Laser Gas Alloying with Nitrogen, Appl. Surf. Sci., 2016, 367, p 80–90CrossRef

Q. Wang, Q. Sun, L. Xiao, and J. Sun, Increasing Wear Resistance of Titanium Alloys by Anode Plasma Electrolytic Saturation with Interstitial Elements, J. Mater. Eng. Perform., 2016, 25, p 241–249CrossRef

J. Jin, H.J. Duan, and X.H. Li, The Influence of Plasma Nitriding on Microstructure and Properties of CrN and CrNiN Coatings on Ti6Al4V by Magnetron Sputtering, Vacuum, 2017, 136, p 112–120CrossRef

M. Liu, J.Y. Li, Y. Ma, T.Y. Yuan, and Q.S. Mei, Surface Nanocrystallization and Property of Ti6Al4V Alloy Induced by High Pressure Surface Rolling, Surf. Coat. Technol., 2016, 289, p 94–100CrossRef

10.

W. Pfleging, R. Kumari, H. Besser, T. Scharnweber, and J.D. Majumdar, Laser Surface Textured Titanium Alloy (Ti-6Al-4V): Part 1—Surface Characterization, Appl. Surf. Sci., 2015, 355, p 104–111CrossRef

11.

R. Kumari, T. Scharnweber, W. Pfleging, H. Besser, and J.D. Majumdar, Laser Surface Textured Titanium Alloy (Ti-6Al-4V)—Part II—Studies on Bio-compatibility, Appl. Surf. Sci., 2015, 357, p 750–758CrossRef

12.

T. Ibatan, M.S. Uddin, and M.A.K. Chowdhury, Recent Development on Surface Texturing in Enhancing Tribological Performance of Bearing Sliders, Surf. Coat. Technol., 2015, 272, p 102–120CrossRef

13.

D.M. Ba, S.N. Ma, C.Q. Li, F.J. Meng, and T.Y. Xiong, Surface Nanocrystallization of 45 Steel Induced by Supersonic Fine Particles Bombarding, Mater. Sci. Technol., 2007, 15, p 342–346

14.

L.L. Ge, N. Tian, Z.X. Lu, and C.Y. You, Influence of the Surface Nanocrystallization on the Gas Nitriding of Ti-6Al-4V Alloy, Appl. Surf. Sci., 2013, 286, p 412–416CrossRef

15.

B.S. Zhang, S.S. Zhu, Z.Z. Wang, and H.Z. Zhou, Microstructure and Tribological Performance of a Dimpled Gradient Nanoscale TiN Layer, Mater. Lett., 2016, 169, p 214–217CrossRef

16.

D.Q. He, S.X. Zheng, J.B. Pu, G.G. Zhang, and L.T. Hu, Improving Tribological Properties of Titanium Alloys by Combining Laser Surface Texturing and Diamond-like Carbon Film, Tribol. Int., 2015, 82, p 20–27CrossRef

17.

C.B. Tang, D.X. Liu, B. Tang, X.H. Zhang, Q. Lin, and C.S. Liu, Influence of Plasma Molybdenizing and Shot-Peening on Fretting Damage Behavior of Titanium Alloy, Appl. Surf. Sci., 2016, 390, p 946–958CrossRef

18.

D.S. She, W. Yue, Z.Q. Fu, C.B. Wang, X.K. Yang, and J.J. Liu, Effects of Nitriding Temperature on Microstructures and Vacuum Tribological Properties of Plasma-Nitrided Titanium, Surf. Coat. Technol., 2015, 264, p 32–40CrossRef

19.

C. Anandan and L. Mohan, Effect of Postnitride Annealing on Wear and Corrosion Behavior of Titanium Alloy Ti-6Al-4V, J. Mater. Eng. Perform., 2016, 25, p 4416–4424CrossRef

20.

A.J. López, P. Rodrigo, B. Torres, and J. Rams, Dry Sliding Wear Behaviour of ZE41A Magnesium Alloy, Wear, 2011, 271, p 2836–2844CrossRef

21.

W.H. Kao, Y.L. Su, J.H. Horng, H.C. Huang, and S.E. Yang, Improved Tribological, Electrochemical and Biocompatibility Properties of Ti6Al4V Alloy By Gas-Nitriding and Ti-C:H Coating, Surf. Coat. Technol., 2015, 283, p 70–79CrossRef

22.

H. Jiang, P. Dong, S. Zeng, and B. Wu, Effects of Recrystallization on Microstructure and Texture Evolution of Cold-Rolled Ti-6Al-4V Alloy, J. Mater. Eng. Perform., 2016, 25, p 1931–1938CrossRef

23.

D.J. Wentink, D. Matthews, N.M. Appelman, and E.M. Toose, A Generic Model for Surface Texture Development, Wear and Roughness Transfer in Skin Pass Rolling, Wear, 2015, s328–329, p 167–176CrossRef

24.

F.X. Ye, Y.H. Xu, M. Hojamberdiev, Y.J. Lai, C. Wang, and X. Wang, Effect of Carbide Ceramic Zone on Wear Resistance of the (Fe, Cr)7C3/Fe Surface Gradient Composite, J. Mater. Eng. Perform., 2015, 24, p 2898–2907CrossRef

25.

B.D. Leonard, F. Sadeghi, S. Shinde, and M. Mittelbach, Rough Surface and Damage Mechanics Wear Modeling Using the Combined Finite-Discrete Element Method, Wear, 2013, 305, p 312–321CrossRef

26.

Y. An, G. Hou, J. Chen, X. Zhao, G. Liu, H. Zhou, and J. Chen, Microstructure and Tribological Properties of Iron-Based Metallic Glass Coatings Prepared by Atmospheric Plasma Spraying, Vacuum, 2014, 107, p 132–140CrossRef

27.

L. Ma, C.G. He, X.J. Zhao, J. Guo, Y. Zhu, W.J. Wang, Q.Y. Liu, and X.S. Jin, Study on Wear and Rolling Contact Fatigue Behaviors of Wheel/Rail Materials Under Different Slip Ratio Conditions, Wear, 2016, 366–367, p 13–26CrossRef

28.

M.L. Hu, Q.D. Wang, Z.S. Ji, H.Y. Xu, M.D. Xin, and G.R. Ma, Wear Behavior of Mg-10Y-4Gd-1.5Zn-0.4Zr alLoy, Trans. Nonferrous Met. Soc. China, 2016, 26, p 406–413CrossRef

29.

X. Mi, W.X. Wang, X.M. Xiong, H. Qian, L.C. Tang, Y.C. Xie, J.F. Peng, Z.B. Cai, and M.H. Zhu, Investigation of fretting wear behavior of Inconel 690 alloy in tube/plate contact configuration, Wear, 2015, s328–329, p 582–590CrossRef

Title: Tribological Properties of Surface-Textured and Plasma-Nitrided Pure Titanium Under Oil Lubrication Condition
Authors: Baosen Zhang
Qiangsheng Dong
Zhixin Ba
Zhangzhong Wang
Hancheng Shi
Yanting Xue
Publication date: 21-12-2017
Publisher: Springer US
Published in: Journal of Materials Engineering and Performance / Issue 1/2018
Print ISSN: 1059-9495
Electronic ISSN: 1544-1024
DOI: https://doi.org/10.1007/s11665-017-3100-1

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 1/2018

Multiaxial Fatigue Life Prediction Based on Short Crack Propagation Model with Equivalent Strain Parameter

Room-Temperature Charpy Impact Property of 3D-Printed 15-5 Stainless Steel

Additive Manufacturing of Metallic Materials: A Review

Porous Titanium Parts Fabricated by Sintering of TiH2 and Ti Powder Mixtures

Passive and Semiconducting Properties Assessment of Commercially Pure Tantalum in Hank’s Physiological Solution

Effect of Coil Current on the Properties of Hydrogenated DLC Coatings Fabricated by Filtered Cathodic Vacuum Arc Technique

Premium Partners