nach oben

Erschienen in:

2022 | OriginalPaper | Buchkapitel

6. A Material-Driven Design Approach Methodology in 3D Printing Waste Recycling

verfasst von : Letícia Faria Teixeira, Juliana de Vilhena Rodrigues, Lauro Arthur Farias Paiva Cohen, Nubia Suely Silva Santos

Erschienen in: Sustainability for 3D Printing

Verlag: Springer International Publishing

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

This work aims to show 3D printing waste recycling efforts and use them in the design of composites with lignocellulosic fibers as reinforcement. The Material-Driven Design (MDD) approach is a methodology that has been used to bring new meanings for the study of materials, and in this work, it was used in the search for sensory and interpretative aspects of the waste and of the developed samples. The waste used in this work was obtained from 3D printers of Technology Incubators Network with Poly (lactic acid) and Acrylonitrile Butadiene Styrene polymeric filaments. As reinforcement was used Açaí (Euterpe Oleracea Mart.) fiber, Jute (Corchorus capsularis) fiber, and wood flour, which have been added in specific quantities to the polymer during the casting process and then poured in silicone molds. The analyzes were made with the residues and with the samples developed based on the MDD method, when groups of students were formed to interact with the samples, seeking to understand the different factors that influence the user experience with the material under study, finding sensory characteristics that can add new meanings and attributes to the recycled material. As a result, there are different perceptions of the material under study that contribute to the design process, generating products and proposals that are environmentally sustainable and have different meanings for users.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel A Bibliometric Analysis on 3D Printed Concrete in Architecture

Nächstes Kapitel Utilization of Agro Waste for the Fabrication of Bio Composites and Bio plastics—Towards a Sustainable Green Circular Economy

Villamil, C., Nylander, J., Hallstedt, S.I., Schulte, J., Watz, M.: Additive manufacturing from a strategic sustainability perspective. Int. Des. Conf. Des. Methods 1381–1392 (2018)

Kellens, K., Baumers, M., Gutowski, T.G., Flanagan, W., Lifset, R., Duflou, J.R.: Environmental dimensions of additive manufacturing. Mapping applications domains and their environmental implications. J. Ind. Ecol. (2017)

Santana, L., Alves, J.L., Sabino Netto, A.C., Merlini, C.: Estudo comparativo entre PETG e PLA para Impressão 3D através de caracterização térmica, química e mecânica. RevistaMatéria, v. 23, n. 4 (2018)

D’Ambrières, W.: Plastics recycling worldwide: current overview and desirable changes. J. Field Actions Special, Issue 19, 11–21 (2019)

Majumdar, P., Karana, E., Ghazal, S., Sonneveld, M.H.: The plastic bakery: a case of material driven design. EKSIG 2017: Alive. Active. Adaptive 1–13 (2017)

Karana, E., Barati, B., Rognoli, V., Van Der Lan, A.Z.: Material driven design (MDD): a method to Design for material experiences. Int. J. Des. 9(2), 35–54 (2015)

Leite, C.D.P., Teixeira, L.F., Cohen, L.A.F., Santos, N.S.S.: Recovery and recycling of a biopolymer as an alternative of sustainability for 3D printing. In: Proceedings of the 3 rdLeNS World Distributed Conference (on line). Milano, Mexico City, Bangalore, Curitiba, Cape Town, vol. 1 (2019)

Santos, N., Silva, M.R., Lino, J.: Reinforcement of a biopolymer matrix bylignocellulosic agro-waste. Procedia Eng. (2017)

Illich, I.: Tools ForConviviatility. Marion Boyars, Londres (1973)

10.

Buechley, A., et al.: DIY for CHI: methods, communities, and values of reuse and customization. In: CHI’09: 2009: New York (2009)

11.

Koplos, J., Metcalf, B.: Makers: A History of American Studio Craft. The University of North Carolina Press, Hendersonville (2010)

12.

Hatch, M.: The Maker Movemet Manifesto: Rules for Innovation in the New World of Crafters, Hackers, and Tinkerers. MsGraw Hill Education (2014)

13.

Alcoforado, M.G., Paschoarelli, L.C., Silva, J.C.P.: Metodologia centrada nos protótipos: um caminho para inclusão de usuários no processo de design. In: 15º Ergodesign, USIHC (2015)

14.

Pradella, M.P., Folle, L.F.: Análise de mercado sobre tecnologias de prototipagem rápida por adição de material. In: anais do 11º P&D Design, Congresso Brasileiro de Pesquisa e Desenvolvimento em Design, Gramado (2014)

15.

Ferroli, P.C.M.: Uso de modelos e protótipos para auxílio na análise da sustentabilidade no Design de produtos. GEPROS. Gestão da Produção, Operações eSistemas, Ano 7, nº 3, (2012)

16.

Bruscato, U.M., Brendler, C.F., Viaro, F.S., Teixeira, F.G., Silva, R.P.: Uso Da Fabricação Digital E Prototipagem No Desenvolvimento Do Projeto Do Produto: Análises Do Produto Através De Simulações Digitais. SiGraDi (2013)

17.

Mancanares, C.G.: Proposta De Um Método De Seleção Do Processo De Prototipagem Rápida Para Fabricar Uma Peça A Partir De Especificações Técnicas Enegep (2013)

18.

Chicca Jr., N.A., Castillo, L. G.: Impressão 3D na cultura do design contemporâneo. In: Anais do 11º. P&D

19.

Rodrigues JR, J.L., Cruz, L.M.S., Sarmanho, A.P.S.: Impressora 3d No Desenvolvimento De Pesquisas Com Próteses. Rev. Interinst. Bras. Ter. Ocup. Rio De Janeiro (2018)

20.

Lussenburg, K., Velden, N.V.D., Doubrovski, Z., Geraedts, J., Karana, E.: Designing with 3Dprinted Textiles. A case study of Material Driven Design (2014)

21.

Sandeep, C.D.: Comparison and analysis of different 3D printingtechniques. Int. J. Latest Trends Eng. Technol.

22.

Alafaghani, A., Qattawi, A., Ablat, M.A.: Design consideration for additive manufacturing: fused deposition modelling. Open J. Appl. Sci. (2017)

23.

Santana, L., Alves, J.L., Sabino Netto, A.C., Merlini, C.: Estudo comparativo entre PETG e PLA para Impressão 3D através de caracterização térmica, química e mecânica. Revista Matéria (2018)

24.

Paiva, D.A., Souza, E.W., Ferreira, A.C.B., Bonse, B.C.: Compostos de ABS virgem e reciclado para impressão em 3D. In: Anais do 13º Congresso brasileiro de Polímeros (2015)

25.

Santos, L.M., Rocha, D.S.G.M., Carneiro, M.L., Luz, M.P.: Tipos de polímeros utilizados como matéria-prima no método de manufatura aditiva por FDM: uma abordagem conceitual. XXXVIII Encontro Nacional de Engenharia de Produção (2018)

26.

Villamil, C., Nylander J., Hallstedt, S.I., Schulte, J., Watz, M.: Additive manufacturing from a strategic sustainability perspective. In: International Design Conference (2018)

27.

Ngo, T.D., Kashania, A., Imbalzanoa, G., Nguyena, K.T.Q., Hui, D. Additive manufacturing (3D printing): a review of materials, methods, applications and challenges. Composites Part B (2018)

28.

Zuniga, J., Katsavelis, D., Peck, P., Stollberg, J., Petrykowski, M., Carson, A., Fernandez, C.: Cyborg beast: a low-cost 3D-printed prosthetic hand for children with upperlimb differences. BMC Research Notes (2015)

29.

Avinc, O., Khoddami, A.: Overview of poly(lactic acid) (PLA) fibre: part i: production, properties, performance, environmental impact, and end-use applications of poly(lactic acid) fibres. Fibre Chem. (2009)

30.

Pereira, R.B., Morales, A.R.: Estudo do comportamento térmico e mecânico do PLA modificado com aditivo nucleante e modificador de impacto. Polímeros (2014)

31.

Lopes, M.S., Jardini, A., Macielfilho, R.: Synthesis and characterizations of poly (lactic acid) by ring-opening polymerization for biomedical applications. Chem. Eng. Trans. (2014)

32.

Mohanty, A.K., Misra, M., Drzal, L.T., Selke, S.E., Harte, B.R., Hinrichsen, G.: Natural fibers, biopolymers, and biocomposites: an introduction. In: Natural Fibers, Biopolymers, and Biocomposites. Taylor & Francis Group, LLC. CRC Press (2005)

33.

Santana, L., Ahrens, C.H., Sabino Neto, A.C., Oliveira, G.M.B., Merlini, C.: Avaliação da composição química e das características térmicas de filamentos de PLA para impressoras 3D de código aberto. In: anais do IX Congresso Nacional de Engenharia Mecânica, Fortaleza (CE), Brasil (2016)

34.

Sandhu, K., Singh, J.P., Singh, S.: Some investigations on the tensile strength of additively manufactured polylactic acid components. In: Advances in Materials Processing, pp. 221–230. Springer, Singapore (2020)

35.

Sandhu, K., Singh, S., Prakash, C.: Analysis of angular shrinkage of fused filament fabricated poly-lactic-acid prints and its relationship with other process parameters. In: IOP Conference Series: Materials Science and Engineering, Vol. 561, No. 1, p. 012058. IOP Publishing (2019)

36.

Besko, M., Bilyk, C., SIEBEN, P.G.: Aspectos técnicos e nocivos dos principais filamentos usados em impressão 3D. GestãoTecnologiaInovação (2017)

37.

Baker, C., Brent, D., Wilson, C., Xu, J., Thompson, L.A.: Additive manufacturing for economical, user-accessible upper-limb prosthetics. IMedPubJournals (2017)

38.

Santos, L.M., Rocha, D.S.G.M., Carneiro, M.L., Luz, M.P.: Tipos de polímeros utilizados como materia prima no método de manufatura aditiva por fdm: uma abordagem conceitual. XXXVIII Encontro Nacional de Engenharia de Produção (2018)

39.

Vishwakarma, S.K., Pandey, P., Gupta, N.K.: Characterization of Abs material: a review. J. Res. Mech. Eng. 7 (2017)

40.

Almeida, A.M.G.: Estudo da possibilidade de utilização do polímero Acrilo, processado via impressão 3D para produção de embalagens retornáveis de fluxos logísticos para a indústria automotiva. Cefet (MG), Belo Horizonte (2016)

41.

Diegel, O., Singamneni, S., Reay, S., Withell, A.: Tools for sustainable product design: additive manufacturing. J. Sustain. Dev. (2010)

42.

Ferroli, P.C.M.: Uso de modelos e protótipos para auxílio na análise da sustentabilidade no Design de produtos. GEPROS (2012)

43.

Angioletti, C.M., Sisca, F.G., Luglietti, R., Taisch, M., Rocca, R.: Additive manufacturing as an opportunity for supporting sustainability through implementation of circular economies. XXI Summer School &quot FrancescoTurco" - Industrial Systems Engineering (2016)

44.

Peng, T., Kellens, K., Tanga, R., Chenc, C., Chen, G.: Sustainability of additive manufacturing: an overview on its energy demand and environmental impact. Additive Manufacturing

45.

Manrique, M.R., Mendes, L.T., Laurentino, A.L., Seabra Filho, S.S. Plástico Precioso: prototipagem rápida e reciclagem de resíduos de manufatura aditiva

46.

47.

Sallenave, G.C., Caldovino, G.C., Silva, F.P., Candido, L.H.A., Jacques, J.J.: Contribuições para a discussão dos resíduos gerados pelo processo de fabricação por filamento fundido (FFF). In: Design em pesquisa (2020)

48.

Spinacé, A.S., De Paoli, M.A.: A Tecnologia da Reciclagem De Polímeros

49.

Pereira, P.H.F., Rosa, M.F., Cioffi, O.H., Benini, K.C.C.C., Milanese, A.C., Voorwald, H.J.C., Mulinari, D.R.: Vegetal fibers in polymeric composites: a review. Polímeros (2015)

50.

Oliveira, G.R., Santos, T., Pacheco, K., Grisa, A.M.C., Zeni, M.: Seletividade A Gases De Membranas de Poli (Ácido Lático) Reforçadas com Fibra de Bananeira. Revista Iberoamericana de Polímeros (2013)

51.

De Moraes, D.: Metaprojeto: o design do design. Blucher, São Paulo (2010)

52.

Calegari, E.P., Oliveira, B.F.: Um estudo focado na relação entre design e materiais. Projética (2013)

53.

Thompson, R.: Materiais sustentáveis, processos e produção. Editora Senac, São Paulo (2015)

54.

Karana, et al.: When material grows: a case study on designing (with) Mycelium-based materials. Int. J. Des. (2018)

55.

Plasacre.Plasacre tile, from http://plasacre.com.br/

56.

Spark & Burnish. Door Handle—Ocean Platic Knob, from https://sparkandburnish.com.au/collections/knobs/products/ocean-plastic-knob-3

57.

Smile Plastic. Handmade Waste Panel, from https://smile-plastics.com/commissions/

58.

Sandhu, K., Singh, G., Singh, S., Kumar, R., Prakash, C., Ramakrishna, S., Królczyk, G., Pruncu, C.I.: Surface characteristics of machined polystyrene with 3D printed thermoplastic tool. Materials 13(12), 2729 (2020)CrossRef

59.

Jonoobia, M., Haruna, J., Mathew, A.P., Oksman, K.: Mechanical properties of cellulose nanofiber (CNF) reinforced polylactic acid (PLA) prepared by twin screw extrusion. Compos. Sci. Technol. (2010)

60.

Majumdar, P., Karana, E., Ghazal, S., Sonneveld, M.H.: The plastic bakery: a case of material driven design. In: Proceedings of the International Conference of the DRS Special Interest Group on Experiential Knowledge and Emerging Materials (2017)

Titel: A Material-Driven Design Approach Methodology in 3D Printing Waste Recycling
verfasst von: Letícia Faria Teixeira
Juliana de Vilhena Rodrigues
Lauro Arthur Farias Paiva Cohen
Nubia Suely Silva Santos
Verlag: Springer International Publishing
Buch: Sustainability for 3D Printing
Print ISBN: 978-3-030-75234-7

Electronic ISBN: 978-3-030-75235-4

Copyright-Jahr: 2022
DOI: https://doi.org/10.1007/978-3-030-75235-4_6

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht