nach oben

Erschienen in:

2017 | OriginalPaper | Buchkapitel

An Acoustic Emission Study of Deformation Behavior of Wrought Mg Alloys

verfasst von : Patrik Dobroň, Daria Drozdenko, Sangbong Yi, Jan Bohlen

Erschienen in: Magnesium Technology 2017

Verlag: Springer International Publishing

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The influence of the pre-compression level on subsequent tensile deformation behavior has been investigated for two extruded Mg alloys with a different grain size distribution. The Mg–Zn–R are earth alloy has homogeneous microstructure, while the Mg–Al–Zn alloy exhibits bimodal microstructure. Deformation tests were performed at room temperature and at a constant strain rate of 10⁻³ s⁻¹. Three pre-compression stress levels were chosen to receive microstructure containing a low number of twins, partially and fully twinned grains, respectively. The concurrent acoustic emission (AE) measurement provides real time information about collective dislocation motion and twin nucleation. Active deformation mechanisms during tensile loading are discussed in term of the AE response.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel 3D Microstructural Evolution on Solidifying Mg–5Nd–5Zn Alloy Observed via In Situ Synchrotron Tomography

Nächstes Kapitel Effect of Thermo-mechanical Treatment of Extruded Z1 Mg Alloy on Resulting Mechanical Properties

C.J. Bettles, M.A. Gibson, Current wrought magnesium alloys: strengths and weakness. JOM—J. Min. Met. Mat. S. 57, 46–49 (2005)

X.Y. Lou, M. Li, R.K. Boger, S.R. Agnew, R.H. Wagoner, Hardening evolution of AZ31B Mg sheet. Int. J. Plast. 23, 44–86 (2007)CrossRef

S. Begum, D.L. Chen, S. Xu, A.A. Luo, Low cycle fatigue properties of an extruded AZ31 magnesium alloy. Int. J. Fatigue 31, 726–735 (2009)CrossRef

J. Koike, N. Fujiyama, D. Ando, Y. Sutou, Roles of deformation twinning and dislocation slip in the fatigue failure mechanism of AZ31 Mg alloys. Scripta Mater. 63, 747–750 (2010)CrossRef

C.R. Heiple, S.H. Carpenter, Acoustic emission produced by deformation of metals and alloys—a review: Part I. J. Acoust. Emission 6, 177–204 (1987)

C.R. Heiple, S.H. Carpenter, Acoustic emission produced by deformation of metals and alloys—a review: Part II. J. Acoustic Emission 6, 215–237 (1987)

A. Vinogradov, D. Orlov, A. Danyuk, Y. Estrin, Effect of grain size on the mechanisms of plastic deformation in wrought Mg–Zn–Zr alloy revealed by acoustic emission measurements. Acta Mater. 61, 2044–2056 (2013)CrossRef

J. Čapek, K. Máthis, B. Clausen, J. Stráská, P. Beran, P. Lukáš, Study of the loading mode dependence of the twinning in random textured cast magnesium by acoustic emission and neutron diffraction methods. Mat. Sci. Eng. A-Struct. 602, 25–32 (2014)CrossRef

Y.P. Li, M. Enoki, Deformation and anelastic recovery of pure magnesium and AZ31B alloy investigated by AE. Mater. Trans. 48(9), 2343–2348 (2007)

10.

A. Vinogradov, E. Vasilev, M. Linderov, D. Merson, In situ observations of the kinetics of twinning–detwinning and dislocation slip in magnesium. Mater. Sci. Eng. A 676, 351–360 (2016)CrossRef

11.

J. Bohlen, P. Dobroň, L. Nascimento, K. Parfenenko, F. Chmelík, D. Letzig, The effect of reversed loading conditions on the mechanical behaviour of extruded magnesium alloy AZ31. Acta Phys. Pol. A 122, 444–449 (2012)CrossRef

12.

D. Drozdenko, J. Bohlen, S. Yi, P. Minárik, F. Chmelík, P. Dobroň, Investigating a twinning-detwinning process in wrought Mg alloys by the acoustic emission technique. Acta Mater. 110, 103–113 (2016)CrossRef

13.

J.W. Christian, S. Mahajan, Deformation twinning. Prog. Mater Sci. 39, 1–157 (1995)CrossRef

14.

J.P. Toronchuk, Acoustic emission during twinning of zinc single crystals. Mater. Eval. 51–53 (1977)

15.

P. Dobroň, F. Chmelík, S. Yi, K. Parfenenko, D. Letzig, J. Bohlen, Grain size effects on deformation twinning in an extruded magnesium alloy tested in compression. Scripta Mater. 65(5), 424–427 (2011)CrossRef

Titel: An Acoustic Emission Study of Deformation Behavior of Wrought Mg Alloys
verfasst von: Patrik Dobroň
Daria Drozdenko
Sangbong Yi
Jan Bohlen
Verlag: Springer International Publishing
Buch: Magnesium Technology 2017
Print ISBN: 978-3-319-52391-0

Electronic ISBN: 978-3-319-52392-7

Copyright-Jahr: 2017
DOI: https://doi.org/10.1007/978-3-319-52392-7_84

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht