nach oben

Erschienen in:

2023 | OriginalPaper | Buchkapitel

Application of the SMART Optical Displacement Sensors in Measuring the Diameter Deviation of C45 Steel After the Turning Process

verfasst von : Martin Miškiv-Pavlík, Jozef Jurko, Alexander Hošovský, Vratislav Hladký, Kamil Židek, Igor Petruška, Tadeusz Eugeniusz Zaborowski

Erschienen in: 7th EAI International Conference on Management of Manufacturing Systems

Verlag: Springer International Publishing

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

This chapter describes an experimental measurement of the deviation from the diameter of a C45 steel workpiece using optical laser sensors and a mechanical micrometer. The aim of this experiment was to analyze and then compare the measured values of the diameter deviation Δ_d from the average for each type of measurement method. In the first part, we described the principle of measurement with an optical sensor (confocal and triangulation). In the second part, the measurements were performed on the machined bar. In the last part, we evaluated the results of the experiment, analyzing the measurement results of different measurement techniques.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 340 Zeitschriften

aus folgenden Fachgebieten:

Bauwesen + Immobilien
Business IT + Informatik
Finance + Banking
Management + Führung
Marketing + Vertrieb
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel The Manufacturing Process of Die Forging Polyamide: Influence of the Annealing on the Properties and Structure

Nächstes Kapitel Use of IIoT Equipment for Error Messaging in Industrial Production

Mrkvica, I., Neslušan, M., Čep, R., & Sléha, V. (2016). Properties and comparison of PVD coatings. Tehnički vjesnik/Technical Gazette, 23(2), 569–574. ISSN 1330-3651.

Petrú, J., Zlámal, T., Mrkvica, I., & Čep, R. (2013). The effect of thermal shocks on wear of exchangeable sintered carbide inserts during the cutting proces. Manufacturing Technology, 14(4), 590–596. ISSN 1213-2489.CrossRef

Flenger, P., et al. (2019). Processing a measured vibroacoustic signal for rock type recognition in rotary drilling technology. Measurement: Journal of the International Measurement Confederation, 134, 451–467. ISSN: 0263-2241.CrossRef

Pitel, J., Matiskova, D., & Marasova, D. (2019). A new approach to evaluation of the material cutting using the artificial neural networks. TEM Journal - Technology Education Management Informatics, 8(2), 325–332 ISSN: 2217-8309.

Peterka, J., et al. (2020). Modification of cutting tools by drag finishing. MM Science Journal, 2020, 3822–3825. ISSN: 1803-1269.CrossRef

Monka, P. P., et al. (2020). Optimal cutting parameter specification of newly designed milling tools based on the frequency monitoring. International Journal of Advanced Manufacturing Technology. https://doi.org/10.1007/s00170-020-06169. ISSN: 0268-3768.

Monková, K., et al. (2020). Durability and Tool wear investigation of HSSE-PM milling cutters within long-term tests. In Engineering failure analysis (Vol. 108) ISSN: 1350-6307.

Michalík, P., Zajac, J., Duplák, J., & Pivovarník, A. (2012). CAM software products for creation of programs for CNC machining. In Lecture notes in electrical engineering, 2011, international conference on future communication, computing, control and management: ICF4C 2011: Pucket: 16–17 December, 2011 (Vol. 141, no. 1, pp. 421–425) ISSN: 1876-1100 ISBN: 978-364227310-0.

Suh, Y. (2019). Laser sensors for displacement, distance and position. Sensors, 19, 1924. https://doi.org/10.3390/s19081924CrossRef

10.

Kishore, P., Dinkar, D., Shankar, M., Srimannarayana, K., Pachava, V. R., Sengupta, D., & Parne, S. (2011). Non-contact vibration sensor using bifurcated bundle glass fiber for real time monitoring. Proceedings of SPIE, 8311. https://doi.org/10.1117/12.904566

11.

Blateyron, F. (2011). Chromatic confocal microscopy. In R. Leach (Ed.), Optical measurement of surface topography. Springer. https://doi.org/10.1007/978-3-642-12012-1_5CrossRef

12.

Hošek, J., & Linduška, P. (2021). Simple modification of a commercial laser triangulation sensor for distance measurement of slot and bore side surfaces. Sensors, 21, 6911. https://doi.org/10.3390/s21206911CrossRef

13.

Knapčikova, L., & Peraković, D. (2022). Innovative approaches in technology challenges in the context of industry 4.0. Wireless Network, 28, 427–429. https://doi.org/10.1007/s11276-021-02863-0CrossRef

14.

Knapcikova, L., & Peraković, D. (2021). Challenges of industrial engineering, management and ICT. Wireless Network, 27, 1557–1559. https://doi.org/10.1007/s11276-021-02598-yCrossRef

15.

Zhou, Q., Chen, R., Huang, B., Liu, C., Yu, J., & Yu, X. (2019). An automatic surface defect inspection system for automobiles using machine vision methods. Sensors, 19, 644.CrossRef

16.

Zbontar, K., Podobnik, B., Povše, F., & Mihelj, M. (2013). On-machine laser triangulation sensor for precise surface displacement measurement of various material types. Proceedings of SPIE, 8839. https://doi.org/10.1117/12.2022838

17.

Yu, Q., Wang, C., Zhang, Y., Hu, S., Liu, T., Cheng, F., Wang, Y., Lin, T., & Xi, L. (2022). Error analysis and correction of thickness measurement for transparent specimens based on chromatic confocal microscopy with inclined illumination. Photonics, 9, 155. https://doi.org/10.3390/photonics9030155CrossRef

18.

Mcgrath, M., Scanaill, N., & Cliodhna. (2013). Sensing and Sensor Fundamentals. In Sensor Technologies. Apress. https://doi.org/10.1007/978-1-4302-6014-1_2CrossRef

19.

Zou, X. C., Zhao, X. S., Li, G., Li, Z. Q., & Sun, T. (2017). Non-contact on-machine measurement using a chromatic confocal probe for an ultra-precision turning machine. International Journal of Advanced Manufacturing Technology, 90, 2163.CrossRef

20.

Jordan, H.-J., Wegner, M., & Tiziani, H. (1998). Highly accurate non-contact characterization of engineering surfaces using confocal microscopy. Measurement Science and Technology, 9(7), 1142–1151.CrossRef

21.

Fu, S., Cheng, F., Tjahjowidodo, T., Zhou, Y., & Butler, D. (2018). A non-contact measuring system for in-situ surface characterization based on laser confocal microscopy. Sensors, 18, 2657. https://doi.org/10.3390/s18082657CrossRef

22.

Zhou, Q., Chen, R., Huang, B., Liu, C., Yu, J., & Yu, X. (2019). An automatic surface defect inspection system for automobiles using machine vision methods. Sensors, 19(3), 644. https://doi.org/10.3390/s19030644CrossRef

23.

Cheng, F., Fu, S., & Chen, Z. (2020). Surface texture measurement on complex geometry using dual-scan positioning strategy. Applied Sciences, 10, 8418. https://doi.org/10.3390/app10238418CrossRef

Titel: Application of the SMART Optical Displacement Sensors in Measuring the Diameter Deviation of C45 Steel After the Turning Process
verfasst von: Martin Miškiv-Pavlík
Jozef Jurko
Alexander Hošovský
Vratislav Hladký
Kamil Židek
Igor Petruška
Tadeusz Eugeniusz Zaborowski
Verlag: Springer International Publishing
Buch: 7th EAI International Conference on Management of Manufacturing Systems
Print ISBN: 978-3-031-22718-9

Electronic ISBN: 978-3-031-22719-6

Copyright-Jahr: 2023
DOI: https://doi.org/10.1007/978-3-031-22719-6_6

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Springer Professional "Wirtschaft"

Premium Partner

Marktübersichten