nach oben

Erschienen in:

2021 | OriginalPaper | Buchkapitel

Automatic Optimization Method Based on Mesh Morphing Surface Sculpting Driven by Biological Growth Method: An Application to the Coiled Spring Section Shape

verfasst von : Stefano Porziani, Francesco De Crescenzo, Emanuele Lombardi, Christian Iandiorio, Pietro Salvini, Marco Evangelos Biancolini

Erschienen in: Computational Science – ICCS 2021

Verlag: Springer International Publishing

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The increasing importance of optimization in manufacturing processes led to the improvement of well established optimization techniques and to the development of new and innovative approaches. Among these, an approach that exploits surface stresses distribution to obtain an optimized configuration is the Biological Growth Method (BGM). Coupling this method with surface sculpting based on Radial Basis Functions (RBF) mesh morphing had proven to be efficient and effective in optimizing specific mechanical components. In this work, the automatic, meshless and constrained parameter-less optimization approach is applied to a classical mechanical component and then compared with a parameter-based shape optimisation result.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 340 Zeitschriften

aus folgenden Fachgebieten:

Bauwesen + Immobilien
Business IT + Informatik
Finance + Banking
Management + Führung
Marketing + Vertrieb
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel Analysis of Vortex Induced Vibration of a Thermowell by High Fidelity FSI Numerical Analysis Based on RBF Structural Modes Embedding

Nächstes Kapitel Verification, Validation and Uncertainty Quantification of Large-Scale Applications with QCG-PilotJob

ANSYS, Inc. http://www.ansys.com/products/structures. Accessed 29 July 2020

RBF Morph srl. http://www.rbf-morph.com/act-module/. Accessed 29 July 2020

Biancolini, M.E.: Mesh morphing and smoothing by means of radial basis functions (RBF): a practical example using Fluent and RBF Morph. In: Handbook of Research on Computational Science and Engineering: Theory and Practice, pp. 347–380. IGI Global (2011)

Biancolini, M.E.: Fast Radial Basis Functions for Engineering Applications. Springer, Cham (2017). https://doi.org/10.1007/978-3-319-75011-8CrossRefMATH

Biancolini, M.E., Cella, U.: An advanced RBF morph application: coupled CFD CSM aeroelastic analysis of a full aircraft model and comparison to experimental data. In: MIRA International Vehicle Aerodynamics Conference, Grove, pp. 243–258 (2010)

Biancolini, M.E., Chiappa, A., Giorgetti, F., Porziani, S., Rochette, M.: Radial basis functions mesh morphing for the analysis of cracks propagation. Procedia Struct. Integrity 8, 433–443 (2018)CrossRef

Davis, P.J.: Interpolation and Approximation. Blaisdell Publishing Company, New York (1963)MATH

De Boer, A., Van der Schoot, M., Bijl, H.: Mesh deformation based on radial basis function interpolation. Comput. Struct. 85(11–14), 784–795 (2007)CrossRef

Galland, F., Gravouil, A., Malvesin, E., Rochette, M.: A global model reduction approach for 3D fatigue crack growth with confined plasticity. Comput. Methods Appl. Mech. Eng. 200(5–8), 699–716 (2011)MathSciNetCrossRef

10.

Giorgetti, F., et al.: Crack propagation analysis of near-surface defects with radial basis functions mesh morphing. Procedia Struct. Integrity 12, 471–478 (2018)

11.

Groth, C., Chiappa, A., Biancolini, M.E.: Shape optimization using structural adjoint and RBF mesh morphing. Procedia Struct. Integrity 8, 379–389 (2018)CrossRef

12.

Groth, C., Cella, U., Costa, E., Biancolini, M.E.: Fast high fidelity CFD/CSM fluid structure interaction using RBF mesh morphing and modal superposition method. In: Aircraft Engineering and Aerospace Technology (2019). https://doi.org/10.1108/AEAT-09-2018-0246

13.

Heywood, R.B.: Photoelasticity for Designers. Pergamon Press, Oxford (1969)

14.

Imaizumi, T., Ohkouchi, T., Ichikawa, S.: Shape optimization of the wire cross section of helical springs. SAE Tech. Paper 920775, 775 (1990)

15.

Kamiya, N., Kita, E.: Boundary element method for quasi-harmonic differential equation with application to stress analysis and shape optimization of helical spring. Comput. Struct. 37(1), 81–86 (1990). https://www.sciencedirect.com/science/article/pii/004579499090199C

16.

Lombardi, M., Parolini, N., Quarteroni, A.: Radial basis functions for inter-grid interpolation and mesh motion in FSI problems. Comput. Methods Appl. Mech. Eng. 256, 117 (2013)MathSciNetCrossRef

17.

Mattheck, C., Burkhardt, S.: A new method of structural shape optimization based on biological growth. Int. J. Fatigue 12(3), 185–190 (1990)CrossRef

18.

Papoutsis-Kiachagias, E.M., Porziani, S., Groth, C., Biancolini, M.E., Costa, E., Giannakoglou, K.C.: Aerodynamic optimization of car shapes using the continuous adjoint method and an RBF morpher. In: Minisci, E., Vasile, M., Periaux, J., Gauger, N.R., Giannakoglou, K.C., Quagliarella, D. (eds.) Advances in Evolutionary and Deterministic Methods for Design, Optimization and Control in Engineering and Sciences. CMAS, vol. 48, pp. 173–187. Springer, Cham (2019). https://doi.org/10.1007/978-3-319-89988-6_11CrossRef

19.

Porziani, S., Groth, C., Biancolini, M.E.: Automatic shape optimization of structural components with manufacturing constraints. Procedia Struct. Integrity 12, 416–428 (2018)CrossRef

20.

Porziani, S., Groth, C., Mancini, L., Cenni, R., Cova, M., Biancolini, M.E.: Optimisation of industrial parts by mesh morphing enabled automatic shape sculpting. Procedia Struct. Integrity 24, 724–737 (2019)CrossRef

21.

Porziani, S., Groth, C., Waldman, W., Biancolini, M.E.: Automatic shape optimisation of structural parts driven by BGM and RBF mesh morphing. Int. J. Mech. Sci. 105976 (2020). http://www.sciencedirect.com/science/article/pii/S0020740320306184

22.

Staten, M.L., Owen, S.J., Shontz, S.M., Salinger, A.G., Coffey, T.S.: A comparison of mesh morphing methods for 3D shape optimization. In: Proceedings of the 20th International Meshing Roundtable, pp. 293–311. Springer, Cham (2011). https://doi.org/10.1007/978-3-642-24734-7_16

23.

Wahl, A.M.: Mechanical Springs. McGraw-Hill Book Company Inc., New York (1963)

24.

Waldman, W., Heller, M.: Shape optimisation of holes in loaded plates by minimisation of multiple stress peaks. Technical Report DSTO-RR-0412, Aerospace Division, Defence Science And Technology Organisation, Melbourne (2015)

Titel: Automatic Optimization Method Based on Mesh Morphing Surface Sculpting Driven by Biological Growth Method: An Application to the Coiled Spring Section Shape
verfasst von: Stefano Porziani
Francesco De Crescenzo
Emanuele Lombardi
Christian Iandiorio
Pietro Salvini
Marco Evangelos Biancolini
Verlag: Springer International Publishing
Buch: Computational Science – ICCS 2021
Print ISBN: 978-3-030-77976-4

Electronic ISBN: 978-3-030-77977-1

Copyright-Jahr: 2021
DOI: https://doi.org/10.1007/978-3-030-77977-1_38

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Springer Professional "Wirtschaft"