nach oben

Erschienen in:

2022 | OriginalPaper | Buchkapitel

2. Biomaterials Printing for Sustainability

verfasst von : Guravtar Singh, Raja Sekhar Dondapati, Lakhwinder Pal Singh

Erschienen in: Sustainability for 3D Printing

Verlag: Springer International Publishing

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

3D printing (3DP) is one of the emerging technology in 21th century and popular in academics and industries. Wide range of materials printed by 3DP and it should be noted that the flexibility of 3DP materials comes from the range of 3DP systems and the seven categories specified in the ISO/ASTM standard. Also, it is not surpassed by all new printers or processes for novel materials. 3DP can never be used as a stand-alone process, being an integral part of a multi-process system or an optimised multi-system process to suit the production of innovative materials and new product requirements. 3DP technology has gained popularity in all fields such as automobile, healthcare, aerospace, recreation, textiles, apparel and the fashion market, etc. Researchers, textile technologists, designers of apparel, suppliers and distributors have since the last decade; they have been working on implementing 3DP technology in their respective fields. 3DP has been recognised as an innovative and efficient process but still, a lot of work is going on these days to use sustainable materials in 3DP from an environmental viewpoint. This chapter provides a brief review on biomaterials that can be used in this technology for sustainable development and strengthen the knowledge bank to the young researchers working in this field.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel Sustainablity for 3D Printing

Nächstes Kapitel Is Laser Additive Manufacturing Sustainable?

Liu, Z., Jiang, Q., Zhang, Y., Li, T., Zhang, H.C.: Sustainability of 3D printing: a critical review and recommendations. In: International Manufacturing Science and Engineering Conference, Vol. 49903, p. V002T05A004. American Society of Mechanical Engineers (2016)

Beg, S., Almalki, W.H., Malik, A., Farhan, M., Aatif, M., Alharbi, K.S., Alruwaili, N.K., Alrobaian, M., Tarique, M., Rahman, M.: 3D printing for drug delivery and biomedical applications. Drug Discovery Today 25(9), 1668–1681 (2020)

Zhang, J., Vo, A.Q., Feng, X., Bandari, S., Repka, M.A.: Pharmaceutical additive manufacturing: a novel tool for complex and personalized drug delivery systems. AAPS PharmSciTech 19(8), 3388–3402 (2018)CrossRef

Alhnan, M.A., Okwuosa, T.C., Sadia, M., Wan, K.W., Ahmed, W., Arafat, B.: Emergence of 3D printed dosage forms: opportunities and challenges. Pharm. Res. 33(8), 1817–1832 (2016)CrossRef

Levy, G.N., Schindel, R., Kruth, J.P.: Rapid manufacturing and rapid tooling with layer manufacturing (LM) technologies, state of the art and future perspectives. CIRP Ann. 52(2), 589–609 (2003)CrossRef

Zeidler, H., Klemm, D., Böttger-Hiller, F., Fritsch, S., Le Guen, M.J., Singamneni, S.: 3D printing of biodegradable parts using renewable biobased materials. Procedia Manuf. 21, 117–124 (2018)CrossRef

Pakkanen, J., Manfredi, D., Minetola, P., Iuliano, L.: About the use of recycled or biodegradable filaments for sustainability of 3D printing. In: International Conference on Sustainable Design and Manufacturing, pp. 776–785. Springer, Cham (2017)

Kohtala, C.: Addressing sustainability in research on distributed production: an integrated literature review. J. Clean. Prod. 106, 654–668 (2015)CrossRef

McAlister, C., Wood, J.: The potential of 3D printing to reduce the environmental impacts of production. In: ECEEE Industrial Summer Study Proceedings, pp. 213–221 (2014)

10.

Gebler, M., Uiterkamp, A.J.S., Visser, C.: A global sustainability perspective on 3D printing technologies. Energy Policy 74, 158–167 (2014)CrossRef

11.

Li, T.I.N.G.J.I.E., Aspler, J.O.S.E.P.H., Kingsland, A.R.L.E.N.E., Cormier, L.M., Zou, X.U.E.J.U.N.: 3d printing–a review of technologies, markets and opportunities for the forest industry. J. Sci. Technol. For. Prod. Process 5(2), 30 (2016)

12.

Cisneros-López, E.O., Pal, A.K., Rodriguez, A.U., Wu, F., Misra, M., Mielewski, D.F., Kiziltas, A., Mohanty, A.K.: Recycled poly (lactic acid)–based 3D printed sustainable biocomposites: A comparative study with injection molding. Mater. Today Sustain. 7, 100027 (2020)

13.

Benwood, C., Anstey, A., Andrzejewski, J., Misra, M., Mohanty, A.K.: Improving the impact strength and heat resistance of 3D printed models: structure, property, and processing correlationships during fused deposition modeling (FDM) of poly(lactic acid). ACS Omega 3(4), 4400–4411 (2018)CrossRef

14.

Mohanty, A.K., Vivekanandhan, S., Pin, J.M., Misra, M.: Composites from renewable and sustainable resources: challenges and innovations. Science 362(6414), 536–542 (2018)CrossRef

15.

Dai, L., Cheng, T., Duan, C., Zhao, W., Zhang, W., Zou, X., Aspler, J., Ni, Y.: 3D printing using plant-derived cellulose and its derivatives: a review. Carbohyd. Polym. 203, 71–86 (2019)CrossRef

16.

Idrees, M., Jeelani, S., Rangari, V.: Three-dimensional-printed sustainable biochar-recycled PET composites. ACS Sustain. Chem. Eng. 6(11), 13940–13948 (2018)CrossRef

17.

Huang, S.H., Liu, P., Mokasdar, A., Hou, L.: Additive manufacturing and its societal impact: a literature review. Int. J. Adv. Manuf. Technol. 67(5–8), 1191–1203 (2013)CrossRef

18.

Ligon, S.C., Liska, R., Stampfl, J., Gurr, M., Mülhaupt, R.: Polymers for 3D printing and customized additive manufacturing. Chem. Rev. 117(15), 10212–10290 (2017)CrossRef

19.

Nguyen, N.A., Barnes, S.H., Bowland, C.C., Meek, K.M., Littrell, K.C., Keum, J.K., Naskar, A.K.: A path for lignin valorization via additive manufacturing of high-performance sustainable composites with enhanced 3D printability. Sci. Adv. 4(12), eaat4967 (2018)

20.

Mann, G.S., Singh, L.P., Kumar, P., Singh, S.: Green composites: a review of processing technologies and recent applications. J. Thermoplast. Compos. Mater. 33(8), 1145–1171 (2020)CrossRef

21.

Hung, B.P., Naved, B.A., Nyberg, E.L., Dias, M., Holmes, C.A., Elisseeff, J.H., Dorafshar, A.H., Grayson, W.L.: Three-dimensional printing of bone extracellular matrix for craniofacial regeneration. ACS Biomater. Sci. Eng. 2(10), 1806–1816 (2016)CrossRef

22.

Zhao, R., Torley, P., Halley, P.J.: Emerging biodegradable materials: starch-and protein-based bio-nanocomposites. J. Mater. Sci. 43(9), 3058–3071 (2008)CrossRef

23.

Lee, S.G., Xu, X.: Design for the environment: life cycle assessment and sustainable packaging issues. Int. J. Environ. Technol. Manage. 5(1), 14–41 (2005)CrossRef

24.

Zhang, K., Mohanty, A.K., Misra, M.: Fully biodegradable and biorenewable ternary blends from polylactide, poly(3-hydroxybutyrate-co-hydroxyvalerate) and poly(butylene succinate) with balanced properties. ACS Appl. Mater. Interfaces 4(6), 3091–3101 (2012)CrossRef

25.

Markstedt, K., Håkansson, K., Toriz, G., Gatenholm, P.: Materials from trees assembled by 3D printing–Wood tissue beyond nature limits. Appl. Mater. Today 15, 280–285 (2019)CrossRef

26.

Eckert, C., Sharmin, S., Kogel, A., Yu, D., Kins, L., Strijkstra, G.J., Polle, A.: What makes the wood? exploring the molecular mechanisms of xylem acclimation in hardwoods to an ever-changing environment. Forests 10(4), 358 (2019)CrossRef

27.

Singh, S., Ramakrishna, S., Berto, F.: 3D Printing of polymer composites: a short review. Mater. Des. Process. Commun. 2(2), e97 (2020)

28.

Prakash, K.S., Nancharaih, T., Rao, V.S.: Additive manufacturing techniques in manufacturing-an overview. Mater. Today: Proc. 5(2), 3873–3882 (2018)

29.

Lalegani Dezaki, M., Ariffin, M.K.A.M., Appalanaidoo, D., Wahid, Z., Rage, A.M.: 3D printed object’s strength-to-weight ratio analysis for M3 liquid material. Adv. Mater. Process. Technol. 1–15 (2020)

30.

Hegab, H.A.: Design for additive manufacturing of composite materials and potential alloys: a review. Manuf. Rev. 3, 11 (2016)

31.

Singh, M., Haverinen, H.M., Dhagat, P., Jabbour, G.E.: Inkjet printing—process and its applications. Adv. Mater. 22(6), 673–685 (2010)CrossRef

32.

Chakraborty, S., Biswas, M.C.: 3D printing technology of polymer-fiber composites in textile and fashion industry: a potential roadmap of concept to consumer. Compos. Struct. 248, 112562 (2020)

33.

Fu, S.Y., Lauke, B., Mäder, E., Yue, C.Y., Hu, X.J.C.P.A.A.S.: Tensile properties of short-glass-fiber-and short-carbon-fiber-reinforced polypropylene composites. Compos. A Appl. Sci. Manuf. 31(10), 1117–1125 (2000)CrossRef

34.

Gürcüm, B.H., Börklü, H.R., Sezer, K., Eren, O.: Implementing 3D printed structures as the newest textile form. J. Fashion Technol. Textile Eng. S4, 2 (2018). https://doi.org/10.4172/2329-9568.S4-019

35.

Kabir, S.F., Mathur, K., Seyam, A.F.M.: A critical review on 3D printed continuous fiber-reinforced composites: history, mechanism, materials and properties. Compos. Struct. 232, p. 111476 (2020)

36.

Partsch, L., Vassiliadis, S., Papageorgas, P.: 3D printed textile fabrics structures. In: The International Istanbul Textile Congress, Istanbul, Turkey (2015)

37.

Kamel, S.: Nanotechnology and its applications in lignocellulosic composites, a mini review. Exp. Polym. Lett. 1(9), 546–575 (2007)CrossRef

38.

Lim, H.W., Cassidy, T.D.: 3D printing technology revolution in future sustainable fashion. In: Sustainability in Textiles and Fashion. Leeds (2014)

39.

Lee, J.Y., An, J., Chua, C.K.: Fundamentals and applications of 3D printing for novel materials. Appl. Mater. Today 7, 120–133 (2017)CrossRef

40.

Chua, C.K., Wong, C.H., Yeong, W.Y.: Standards, Quality Control, and Measurement Sciences in 3D Printing and Additive Manufacturing. Academic Press (2017)CrossRef

41.

Chua, C.K., Yeong, W.Y.: Materials for bioprinting. In: Bioprinting: Principles and Applications, pp. 117–164. World Scientific Publishing Co. Pte. Ltd, Singapore (2014)

42.

Lee, J.Y., Tan, W.S., An, J., Chua, C.K., Tang, C.Y., Fane, A.G., Chong, T.H.: The potential to enhance membrane module design with 3D printing technology. J. Membr. Sci. 499, 480–490 (2016)CrossRef

43.

Lee, J.Y., An, J., Chua, C.K., Fane, A.G., Chong, T.H.: A perspective on 3D printed membrane: direct/indirect fabrication methods via direct laser writing (2016)

44.

Ambrosi, A., Moo, J.G.S., Pumera, M.: Helical 3D-printed metal electrodes as custom-shaped 3D platform for electrochemical devices. Adv. Func. Mater. 26(5), 698–703 (2016)CrossRef

45.

Loo, A.H., Chua, C.K., Pumera, M.: DNA biosensing with 3D printing technology. Analyst 142(2), 279–283 (2017)CrossRef

46.

Gopinathan, J., Noh, I.: Recent trends in bioinks for 3D printing. Biomater. Res. 22(1), 11 (2018)CrossRef

47.

Álvarez-Chávez, C.R., Edwards, S., Moure-Eraso, R., Geiser, K.: Sustainability of bio-based plastics: general comparative analysis and recommendations for improvement. J. Clean. Prod. 23(1), 47–56 (2012)CrossRef

48.

Álvarez-Chávez, C.R., Edwards, S., Moure-Eraso, R., Geiser, K.: Sustainability of bio-based plastics: general comparative analysis. In: 3rd International Workshop on Advances in Cleaner Production, São Paulo, Brazil (2011)

49.

Arikan, E.B., Ozsoy, H.D.: A review: investigation of bioplastics. J. Civ. Eng. Arch 9, 188–192 (2015)

50.

Auras, R., Harte, B., Selke, S.: An overview of polylactides as packaging materials. Macromol. Biosci. 4(9), 835–864 (2004)CrossRef

51.

Auvergne, R., Caillol, S., David, G., Boutevin, B., Pascault, J.P.: Biobased thermosetting epoxy: present and future. Chem. Rev. 114(2), 1082–1115 (2014)CrossRef

52.

Bechthold, I., Bretz, K., Kabasci, S., Kopitzky, R., Springer, A.: Succinic acid: a new platform chemical for biobased polymers from renewable resources. Chem. Eng. Technol.: Indus. Chem. Plant Equip. Process Eng. Biotechnol. 31(5), 647–654 (2008)CrossRef

53.

Gandini, A., Lacerda, T.M.: From monomers to polymers from renewable resources: recent advances. Prog. Polym. Sci. 48, 1–39 (2015)CrossRef

54.

Robert, C., De Montigny, F., Thomas, C.M.: Tandem synthesis of alternating polyesters from renewable resources. Nat. Commun. 2(1), 1–6 (2011)CrossRef

55.

Bozell, J.J., Petersen, G.R.: Technology development for the production of biobased products from biorefinery carbohydrates—the US department of energy’s “Top 10” revisited. Green Chem. 12(4), 539–554 (2010)CrossRef

56.

Gioia, C., Banella, M.B., Vannini, M., Celli, A., Colonna, M., Caretti, D.: Resorcinol: a potentially bio-based building block for the preparation of sustainable polyesters. Eur. Polymer J. 73, 38–49 (2015)CrossRef

57.

Schlosser, Š., Blahušiak, M.: Biorefinery for production of chemicals, energy and fuels. Elektroenergetika 4(2) (2011)

58.

Briassoulis, D., Dejean, C., Picuno, P.: Critical review of norms and standards for biodegradable agricultural plastics part II: composting. J. Polym. Environ. 18(3), 364–383 (2010)CrossRef

59.

Díaz Lantada, A., de Blas Romero, A., Sánchez Isasi, Á., Garrido Bellido, D.: Design and performance assessment of innovative eco-efficient support structures for additive manufacturing by photopolymerization. J. Ind. Ecol. 21(S1), S179–S190 (2017)CrossRef

60.

Hanssen, O.J.: Environmental impacts of product systems in a life cycle perspective: a survey of five product types based on life cycle assessments studies. J. Clean. Prod. 6(3–4), 299–311 (1998)CrossRef

61.

Davachi, S.M., Kaffashi, B.: Polylactic acid in medicine. Polym. Plast. Technol. Eng. 54(9), 944–967 (2015)CrossRef

62.

Drummer, D., Cifuentes‐Cuéllar, S., Rietzel, D.: Suitability of PLA/TCP for fused deposition modeling. Rapid Prototyp. J. 18(6), 500–507 (2012)

63.

Hamad, K., Kaseem, M., Yang, H.W., Deri, F., Ko, Y.G.: Properties and medical applications of polylactic acid: a review. Exp. Polym. Lett. 9(5), 435–455 (2015)

64.

Huneault, M.A., Li, H.: Morphology and properties of compatibilized polylactide/thermoplastic starch blends. Polymer 48(1), 270–280 (2007)CrossRef

65.

Kreiger, M., Pearce, J.M.: Environmental life cycle analysis of distributed three-dimensional printing and conventional manufacturing of polymer products. ACS Sustain. Chem. Eng. 1(12), 1511–1519 (2013)CrossRef

66.

Li, J., He, Y., Inoue, Y.: Thermal and mechanical properties of biodegradable blends of poly(L-lactic acid) and lignin. Polym. Int. 52(6), 949–955 (2003)CrossRef

67.

Mathew, A.P., Oksman, K., Sain, M.: Mechanical properties of biodegradable composites from poly lactic acid (PLA) and microcrystalline cellulose (MCC). J. Appl. Polym. Sci. 97(5), 2014–2025 (2005)CrossRef

68.

Mekonnen, T., Mussone, P., Khalil, H., Bressler, D.: Progress in bio-based plastics and plasticizing modifications. J. Mater. Chem. A 1(43), 13379–13398 (2013)CrossRef

69.

Mohanty, A.K., Wibowo, A., Misra, M., Drzal, L.T.: Development of renewable resource–based cellulose acetate bioplastic: effect of process engineering on the performance of cellulosic plastics. Polym. Eng. Sci. 43(5), 1151–1161 (2003)CrossRef

70.

Sudesh, K., Iwata, T.: Sustainability of biobased and biodegradable plastics. CLEAN–Soil, Air, Water 36(5–6), 433–442 (2008)

71.

Ventola, C.L.: Medical applications for 3D printing: current and projected uses. Pharm. Ther. 39(10), 704 (2014)

72.

Van Wijk, A.J.M., Van Wijk, I.: 3D printing with biomaterials: Towards a sustainable and circular economy. IOS Press (2015)

73.

Zhang, Z., Harrison, M.D., Rackemann, D.W., Doherty, W.O., O’Hara, I.M.: Organosolv pretreatment of plant biomass for enhanced enzymatic saccharification. Green Chem. 18(2), 360–381 (2016)CrossRef

74.

Zhao, B., Chen, G., Liu, Y.U., Hu, K., Wu, R.: Synthesis of lignin base epoxy resin and its characterization. J. Mater. Sci. Lett. 20(9), 859–862 (2001)CrossRef

75.

Vink, E.T., Rabago, K.R., Glassner, D.A., Gruber, P.R.: Applications of life cycle assessment to NatureWorks™ polylactide (PLA) production. Polym. Degrad. Stab. 80(3), 403–419 (2003)

76.

Rengier, F., Mehndiratta, A., Von Tengg-Kobligk, H., Zechmann, C.M., Unterhinninghofen, R., Kauczor, H.U., Giesel, F.L.: 3D printing based on imaging data: review of medical applications. Int. J. Comput. Assist. Radiol. Surg. 5(4), 335–341 (2010)CrossRef

77.

ASTM, D.: 638-02a Standard Test Method for Tensile Properties of Plastics, p. 55. ASTM International, West Conshohocken, PA (2002)

78.

Standard, A.S.T.M.: D695, 2015, Standard Test Method for Compressive Properties of Rigid Plastics. ASTM International, West Conshohocken, PA (2015)

79.

Azimi, P., Zhao, D., Pouzet, C., Crain, N.E., Stephens, B.: Emissions of ultrafine particles and volatile organic compounds from commercially available desktop three-dimensional printers with multiple filaments. Environ. Sci. Technol. 50(3), 1260–1268 (2016)CrossRef

80.

Bandyopadhyay, A., Bose, S., Das, S.: 3D printing of biomaterials. MRS Bull. 40(2), 108–115 (2015)CrossRef

81.

Cherykhunthod, W., Seadan, M., Suttiruengwong, S.: Effect of peroxide and chain extender on mechanical properties and morphology of poly(butylene succinate)/poly(lactic acid) blends. IOP Conf. Ser.: Mater. Sci. Eng. 87, 012073 (2015). https://doi.org/10.1088/1757-899X/87/1/012073

82.

Corneillie, S., Smet, M.: PLA architectures: the role of branching. Polym. Chem. 6(6), 850–867 (2015)CrossRef

83.

Athanasiou, K.A., Niederauer, G.G., Agrawal, C.M.: Sterilization, toxicity, biocompatibility and clinical applications of polylactic acid/polyglycolic acid copolymers. Biomaterials 17(2), 93–102 (1996)CrossRef

84.

Holowka, E., Bhatia, S.K.: Drug Delivery. Springer-Verlag, New York (2016)

85.

Bhatia, S.K.: Traumatic injuries. In: Biomaterials for Clinical Applications, pp. 213–258. Springer, New York, NY (2010)

86.

Bhatia, S.K., Bhatia, R.K., Yang, Y.H.: Biosynthesis of polyesters and polyamide building blocks using microbial fermentation and biotransformation. Rev. Environ. Sci. Biotechnol. 15(4), 639–663 (2016)CrossRef

87.

Mann, G.S., Singh, L.P., Kumar, P., Singh, S., Prakash, C.: On briefing the surface modifications of polylactic acid: a scope for betterment of biomedical structures. J. Thermoplast. Compos. Mater. 34(7), 977–1005 (2019). https://doi.org/10.1177/0892705719856052

88.

Ramakrishna, S., Mayer, J., Wintermantel, E., Leong, K.W.: Biomedical applications of polymer-composite materials: a review. Compos. Sci. Technol. 61(9), 1189–1224 (2001)CrossRef

89.

Chandramohan, D., Marimuthu, K.: Bio composite materials based on bio polymers and natural fibers-contribution as bone implants. IJAMSAR 1(1), 09–12 (2011)

90.

Santo, V.E., Duarte, A.R.C., Gomes, M.E., Mano, J.F., Reis, R.L.: Hybrid 3D structure of poly(d, l-lactic acid) loaded with chitosan/chondroitin sulfate nanoparticles to be used as carriers for biomacromolecules in tissue engineering. J. Supercrit. Fluids 54(3), 320–327 (2010)CrossRef

91.

Huang, S.J., Edelman, P.G.: An overview of biodegradable polymers and biodegradation of polymers. In: Degradable Polymers, pp. 18–28. Springer, Dordrecht (1995)

92.

Wang, H., Qiu, Z.: Crystallization behaviors of biodegradable poly (l-lactic acid)/graphene oxide nanocomposites from the amorphous state. Thermochim. Acta 526(1–2), 229–236 (2011)CrossRef

93.

Sandhu, K., Singh, J.P., Singh, S.: Some investigations on the tensile strength of additively manufactured polylactic acid components. In: Advances in Materials Processing, pp. 221–230. Springer, Singapore (2020)

94.

Sandhu, K., Singh, S., Prakash, C.: Analysis of angular shrinkage of fused filament fabricated poly-lactic-acid prints and its relationship with other process parameters. IOP Conf. Ser.: Mater. Sci. Eng. 561(1), 012058 (2019)

95.

Lima, L.T., Aurasb, R., Rubinob, M.: Processing technologies for poly (lactic acid). Prog. Polym. Sci. 33(8), 820–852 (2008)

96.

Pandey, J.K., Reddy, K.R., Kumar, A.P., Singh, R.P.: An overview on the degradability of polymer nanocomposites. Polym. Degrad. Stab. 88(2), 234–250 (2005)CrossRef

97.

Rasal, R.M., Janorkar, A.V., Hirt, D.E.: Poly (lactic acid) modifications. Prog. Polym. Sci. 35(3), 338–356 (2010)CrossRef

98.

Sandhu, K., Singh, G., Singh, S., Kumar, R., Prakash, C., Ramakrishna, S., Królczyk, G., Pruncu, C.I.: Surface characteristics of machined polystyrene with 3D printed thermoplastic tool. Materials 13(12), 2729 (2020)CrossRef

99.

Singh, S., Singh, G., Sandhu, K., Prakash, C., Singh, R.: Investigating the optimum parametric setting for MRR of expandable polystyrene machined with 3D printed end mill tool. Mater. Today: Proc. 33, 1513–1517 (2020)

Titel: Biomaterials Printing for Sustainability
verfasst von: Guravtar Singh
Raja Sekhar Dondapati
Lakhwinder Pal Singh
Verlag: Springer International Publishing
Buch: Sustainability for 3D Printing
Print ISBN: 978-3-030-75234-7

Electronic ISBN: 978-3-030-75235-4

Copyright-Jahr: 2022
DOI: https://doi.org/10.1007/978-3-030-75235-4_2

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht