nach oben

Journal of Failure Analysis and Prevention

13.04.2018 | Technical Article---Peer-Reviewed

Buckling Load Prediction in Ortho-Grid Plates for Aerospace Structures

verfasst von: Rizwan Sabir, Abid Ali Khan, Hassan Junaid Hasham, Irfan Ali Khan

Erschienen in: Journal of Failure Analysis and Prevention

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Iso-grid structures provide high strength with reduced weights, which is an essential requirement for aerospace applications. Buckling of Ortho-grid structure is a phenomenon with complex interaction between skin, stiffeners and sub-stiffeners. Introduction of sub-stiffeners increases the load bearing capacity of the structures many folds as compared to the classical Iso-grid or Ortho-grid structure. In this work, a customized MATLAB^® code is developed for computational analysis based on finite element (FE) analysis. In case of FE analysis, the degenerated shell element is used. In the first phase of the MATLAB^® code development, an elasto-plastic analysis of a clamped quadratic-shell is performed and the results are verified with the published literature. In the next phase, the buckling analysis of thin-plate is performed and the results are again verified with the literature. After verification of developed code, FE analysis of the Ortho-grid-stiffened plates is successfully validated. The results attained from developed code are compared with analysis performed on ANSYS^® software along with the published work. The results revalidate the fact that stiffeners increase buckling load by over fifty times, which stands the main motive for their use in aerospace industry.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

S.M. Huybrechts, S.E. Hahn, T.E. Meink, Grid stiffened structures: a survey of fabrication, analysis and design methods, in Proceedings of the 12th International Conference on Composite Materials (ICCM/12). Paris, France (1999)

J.P. Peterson, Buckling of Stiffened Cylinders in Axial Compression and Bending: A Review of Test Data (National Aeronautics and Space Administration, 1969)

J. Williams, R. Davis, Buckling experiments on stiffened cast-epoxy conical shells. Exp. Mech. 15(9), 329–338 (1975)CrossRef

R. Meyer, Isogrid—a simple, efficient, stiffening concept, in 14th Structures, Structural Dynamics, and Materials Conference (AIAA, 1973), p. 365

J. Dyer, P. Slysh, Conical Isogrid Adapter Structural Test Results (General Dynamics Convair Aerospace Division, San Diego, 1974)

W.L. Heard Jr., M.S. Anderson, P. Slysh, An Engineering Procedure for Calculating Compressive Strength of Isogrid Cylindrical Shells with Buckled Skin (NASA Langley Research Center, 1976)

P. Slysh et al., Isogrid structural tests and stability analyses. J. Aircr. 13(10), 778–785 (1976)CrossRef

L.W. Rehfield, R.B. Deo, Buckling of Continuous Filament Advanced Composite Isogrid Wide Columns in Axial Compression (Georgia Institute of Technology, 1978)

L. Parnas et al., Postbuckling and crippling of I-section composite stiffeners. J. Aerosp. Eng. 8(1), 32–42 (1995)CrossRef

10.

S. Huybrechts, T.E. Meink, Advanced grid stiffened structures for the next generation of launch vehicles, in Aerospace Conference, 1997. Proceedings, IEEE(IEEE, 1997)

11.

H. Mahfuz, et al., Effect of Rib Geometry on the Buckling Behavior of Composite Isogrid Cylinders

12.

D. Jensen, M. Redford, L. Francom, On the structural efficiency of three-dimensional isogrid designs, in 37th Structure, Structural Dynamics and Materials Conference (1996)

13.

N. Jaunky, N.F. Knight, D.R. Ambur, Optimal design of grid-stiffened composite panels. J. Aircr. 35(3), 478–486 (1998)CrossRef

14.

M. Cho, W. Kim, Buckling analysis of grid-stiffened composite plates using hybrid element with drilling DOF, in 40th Structures, Structural Dynamics, and Materials Conference and Exhibit (1999)

15.

T.D. Kim, Postbuckled behavior of composite isogrid stiffened shell structure. Adv. Compos. Mater 9(3), 253–263 (2000)CrossRef

16.

M. Yazdani et al., An experimental investigation into the buckling of GFRP stiffened shells under axial loading. Sci. Res. Essays 4(9), 914–920 (2009)

17.

S.N. Nampy, E.C. Smith. Stiffness Analysis of Closed Cross-Section Composite Grid-Stiffened Cylinders, in Proceedings of the 51st AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Orlando, FL (2010)

18.

A. Biskner, J. Higgins, Design and evaluation of a reinforced advanced-grid stiffened composite structure, in 46th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference (2005)

19.

M.J. Weber, P. Middendorf, Semi-analytical skin buckling of curved orthotropic grid-stiffened shells. Compos. Struct. 108, 616–624 (2014)CrossRef

20.

C. Bisagni, R. Vescovini, C. Davila. Assessment of the damage tolerance of post-buckled hat-stiffened panels using single stringer specimens, in 51st AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference 18th AIAA/ASME/AHS Adaptive Structures Conference 12th (2010)

21.

G. Ben, T. Suzuki, K. Sakata. Optimum structural design of CFRP isogrid cylindrical shells, in 15th European Conference on Composite Materials (2012)

22.

G. Rahimi, M. Zandi, S. Rasouli, Analysis of the effect of stiffener profile on buckling strength in composite isogrid stiffened shell under axial loading. Aerosp. Sci. Technol. 24(1), 198–203 (2013)CrossRef

23.

Y. Bayat, H. EkhteraeiToussi, Exact solution of thermal buckling and post buckling of composite and SMA hybrid composite beam by layerwise theory. Aerosp. Sci. Technol. 67, 484–494 (2017)CrossRef

24.

D.J. Brimm, Unistructure—a new concept for light weight integrally stiffened skin structure. Aircr. Eng. Aerosp. Technol. 54(4), 2–8 (1982)CrossRef

25.

M.S. Anderson, Buckling of periodic lattice structures. AIAA J. 19(6), 782–788 (1981)CrossRef

26.

G. Totaro, F. De Nicola, Recent advance on design and manufacturing of composite anisogrid structures for space launchers. Acta Astronaut. 81(2), 570–577 (2012)CrossRef

27.

H. Kanou, S. Nabavi, J. Jam, Numerical modeling of stresses and buckling loads of isogrid lattice composite structure cylinders. Int. J. Eng. Sci. Technol. 5(1), 42–54 (2013)CrossRef

28.

Isogrid Design Handbook, McDonnell Douglas Astronautics Company (1973), p. G4295A

29.

P. Slysh, Iso-Grid Weight Optimization (Society of Allied Weight Engineers, 1975) (Index category No. 22)

30.

P. Slysh, Iiso-grid structural applications(Society of Allied Weight Engineers,1976) (Index category No. 22)

31.

P. Slysh, Expert system for generation of flat patterns of isogrid shell structures with circular bosses, in Society of Allied Weight Engineers, Annual Conference, 44 th, Arlington, TX (1985)

32.

M.H. Schneider et al., Buckling and vibration of externally pressurized conical shells withcontinuous and discontinuous rings. AIAA J. 29(9), 1515–1522 (1991)CrossRef

33.

R. Sabir et al., A survey of recent developments in optimization of iso-grid structure. J. Space Technol. 5(1), 103–115 (2016)

34.

D. Darooka, D. Jensen, Advanced space structure concepts and their development, in 19th AIAA Applied Aerodynamics Conference (2001)

35.

D. Baker, et al. Optimal design and damage tolerance verification of an isogrid structure for helicopter application, in 44th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference (2004)

36.

O. Vanli, P. Michaleris, Distortion analysis of welded stiffeners. J. Ship Prod. 17(4), 226–240 (2001)

37.

P. Wegner, J. Higgins, B. VanWest, Application of advanced grid-stiffened structures technology to the Minotaur payload fairing, in 43rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference (2002)

38.

E. Byklum, J. Amdahl, Nonlinear buckling analysis and ultimate strength prediction of stiffened steel and aluminium panels, in The Second International Conference on Advances in Structural Engineering and Mechanics (2002)

39.

J.-T. Yoo, Y.-S. Jang, Y.-M. Yi, Structural Design and Development of Isogrid Cylinder for Propellant Tank, in 56th International Astronautical Congress, IAC-05-C2 (2005)

40.

I. Stanciulescu, L.N. Virgin, T.A. Laursen, Slender solar sail booms: finite element analysis. J. Spacecr. Rockets 44(3), 528–537 (2007)CrossRef

41.

P. Williams, et al., Complementary post-buckling analyses of truss-lattice shear panels, in 48th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference (2007)

42.

A. Barut, E. Madenci, Post-Buckling of Composite Panels with Isogrid Stiffeners, in 49th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, 16th AIAA/ASME/AHS Adaptive Structures Conference, 10th AIAA Non-Deterministic Approaches Conference, 9th AIAA Gossamer Spacecraft Forum, 4th AIAA Multidisciplinary Design Optimization Specialists Conference (2008)

43.

C. Collier, et al., Local Post Buckling: An Efficient Analysis Approach for Industry Use, in 50th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference 17th AIAA/ASME/AHS Adaptive Structures Conference 11th AIAA No. (2009)

44.

M. Paschero, M.W. Hyer, Axial buckling of an orthotropic circular cylinder: application to orthogrid concept. Int. J. Solids Struct. 46(10), 2151–2171 (2009)CrossRef

45.

R.P. Thornburgh, M.W. Hilburger, Longitudinal Weld Land Buckling in Compression-Loaded Orthogrid Cylinders (2010)

46.

M. Paschero, M.W. Hyer, Improvement of axial buckling capacity of elliptical lattice cylinders. AIAA J. 49(2), 396–410 (2011)CrossRef

47.

G. Totaro, Local buckling modelling of isogrid and anisogrid lattice cylindrical shells with triangular cells. Compos. Struct. 94(2), 446–452 (2012)CrossRef

48.

M. Hilburger, et al., Design and analysis of subscale and full-scale buckling-critical cylinders for launch vehicle technology development, in 53rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference 20th AIAA/ASME/AHS Adaptive Structures Conference 14th AIAA (2012)

49.

M. Hilburger, Developing the next generation shell buckling design factors and technologies, in 53rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference 20th AIAA/ASME/AHS Adaptive Structures Conference 14th AIAA (2012)

50.

S. Nampy, E. Smith, Structural Behavior of Grid-stiffened Tubes Under Axial, Bending, and Torsion Loads, in 49th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, 16th AIAA/ASME/AHS Adaptive Structures Conference, 10th AIAA Non-Deterministic Approaches Conference, 9th AIAA Gossamer Spacecraft Forum, 4th AIAA Multidisciplinary Design Optimization Specialists Conference (2008)

51.

L. Rønning, A. Aalberg, P.K. Larsen, An experimental study of ultimate compressive strength of transversely stiffened aluminium panels. Thin Walled Struct. 48(6), 357–372 (2010)CrossRef

52.

G. Brando, G. De Matteis, Experimental and numerical analysis of a multi-stiffened pure aluminium shear panel. Thin Walled Struct. 49(10), 1277–1287 (2011)CrossRef

53.

D. Quinn et al., Non-prismatic sub-stiffening for stiffened panel plates—stability behaviour and performance gains. Thin Walled Struct. 48(6), 401–413 (2010)CrossRef

54.

R. Paulo, F. Teixeira-Dias, R. Valente, Numerical simulation of aluminium stiffened panels subjected to axial compression: Sensitivity analyses to initial geometrical imperfections and material properties. Thin Walled Struct. 62, 65–74 (2013)CrossRef

55.

G. Totaro, F. De Nicola, P. Caramuta, Local buckling modelling of anisogrid lattice structures with hexagonal cells: an experimental verification. Compos. Struct. 106, 734–741 (2013)CrossRef

56.

M.A. Crisfield, J.J. Remmers, C.V. Verhoosel, Nonlinear Finite Element Analysis of Solids and Structures (Wiley, New York, 2012)

57.

E. Reissner, The effect of transverse shear deformation on the bending of elastic plates (1945)

58.

R. Mindlin, Influence of rotatory inertia and shear on flexural motions of isotropic, elastic plates. J. Appl. Mech. 18, 31 (1951)

59.

O. Zienkiewicz, R. Taylor, J. Too, Reduced integration technique in general analysis of plates and shells. Int. J. Numer. Meth. Eng. 3(2), 275–290 (1971)CrossRef

60.

E. Pugh, E. Hinton, O. Zienkiewicz, A study of quadrilateral plate bending elements with ‘reduced’integration. Int. J. Numer. Meth. Eng. 12(7), 1059–1079 (1978)CrossRef

61.

H. Parisch, A critical survey of the 9-node degenerated shell element with special emphasis on thin shell application and reduced integration. Comput. Methods Appl. Mech. Eng. 20(3), 323–350 (1979)CrossRef

62.

T. Belytschko, J.S.-J. Ong, W.K. Liu, A consistent control of spurious singular modes in the 9-node Lagrange element for the Laplace and Mindlin plate equations. Comput. Methods Appl. Mech. Eng. 44(3), 269–295 (1984)CrossRef

63.

T. Belytschko, C.S. Tsay, A stabilization procedure for the quadrilateral plate element with one-point quadrature. Int. J. Numer. Meth. Eng. 19(3), 405–419 (1983)CrossRef

64.

E. Hinton, B. Suarez Arroyo, Finite Elements Software for Plates and Shells (1984)

65.

H.-C. Huang, Static and Dynamic Analyses of Plates and Shells: Theory, Software and Applications (Springer, Berlin, 2012)

66.

M. Ozakca, A. Murphy, S. Van Der Veen. Buckling and post-buckling of sub-stiffened or locally tailored aluminium panels, in 25th International Congress of the Aeronautical Sciences (2006)

67.

A.R. Pouladkhan, E. Jalil, S. Majid, Numerical Study of Buckling of Thin Plates (World Academy of Science, Engineering and Technology, 2011), p. 152–157

68.

J.G. Williams, et al., Recent developments in the design, testing and impact-damage tolerance of stiffened composite panels, in Fibrous Composites in Structural Design (Springer, Berlin, 1980), p. 259–291

69.

A.E. Lovejoy, M.W. Hilburger, SBKF Modeling and Analysis Plan: Buckling Analysis of Compression-Loaded Orthogrid and Isogrid Cylinders (2013)

70.

J. Lavin, E. Gutierrez-Miravete, Buckling of Isogrid Plates (Rensselaer Polytechnic Institute, Hartford, CT, 2010)

71.

K. Sakata, G. Ben, Fabrication method and compressive properties of CFRP isogrid cylindrical shells. Adv. Compos. Mater 21(5–6), 445–457 (2012)CrossRef

72.

S.B. Mulani, D. Locatelli, R.K. Kapania, Grid-stiffened panel optimization using curvilinear stiffeners, in AIAA paper (2011–1895) (2011)

73.

M.W. Hilburger, et al., Design and analysis of subscale and full-scale buckling-critical cylinders for launch vehicle technology development. NASA REPORT (2012)

74.

X. Qu, R.T. Haftka, Reliability-based design optimization of stiffened panels, in Fourth International Symposium on Uncertainty Modeling and Analysis, 2003. ISUMA 2003 (IEEE, 2003)

75.

D. Wang, M.M. Abdalla, W. Zhang, Buckling optimization design of curved stiffeners for grid-stiffened composite structures. Compos. Struct. 159, 656–666 (2017)CrossRef

Titel: Buckling Load Prediction in Ortho-Grid Plates for Aerospace Structures
verfasst von: Rizwan Sabir
Abid Ali Khan
Hassan Junaid Hasham
Irfan Ali Khan
Publikationsdatum: 13.04.2018
Verlag: Springer US
Erschienen in: Journal of Failure Analysis and Prevention
Print ISSN: 1547-7029
Elektronische ISSN: 1864-1245
DOI: https://doi.org/10.1007/s11668-018-0453-1

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht