nach oben

Erschienen in:

2016 | OriginalPaper | Buchkapitel

11. Causal Models of JIT Elements Associated with Production Process and the Obtained Benefits

verfasst von : Jorge Luis García-Alcaraz, Aidé Aracely Maldonado-Macías

Erschienen in: Just-in-Time Elements and Benefits

Verlag: Springer International Publishing

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

This chapter addresses three models to associate JIT elements from production process with JIT benefits obtained. Readers may once more refer to methodology addressed in Chap. 5 for a full comprehension of the procedures here described concerning the planning, development, and execution of models. Moreover, since the category of JIT elements associated with the production process comprises 18 items required for the successful JIT production process, it was necessary to perform a factor analysis to identify how many latent variables were comprised in this category.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 340 Zeitschriften

aus folgenden Fachgebieten:

Bauwesen + Immobilien
Business IT + Informatik
Finance + Banking
Management + Führung
Marketing + Vertrieb
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel Causal Models of JIT Elements Associated with Human Resources and Obtained Benefits

Nächstes Kapitel Causal Models JIT Elements Associated with Product and Obtained Benefits

Absi N, Dauzère-Pérès S, Kedad-Sidhoum S (2012) Just-in-time planning and lot-sizing. In: Ríos-Mercado RZ, Ríos-Solís YA (eds) Just-in-time systems. Springer New York, pp 191–207

Ahmad MF, Zakuan N, Jusoh A, Takala J (2012) Relationship of TQM and business performance with mediators of SPC, lean production and TPM. Procedia Soc Behav Sci 65:186–191. doi:10.1016/j.sbspro.2012.11.109 CrossRef

Al-Tahat MD, Mukattash AM (2006) Design and analysis of production control scheme for Kanban-based JIT environment. J Franklin Inst 343(4–5):521–531. doi:10.1016/j.jfranklin.2006.01.001 CrossRefMATH

Alcaraz JLG, Maldonado AA, Iniesta AA, Robles GC, Hernández GA (2014) A systematic review/survey for JIT implementation: Mexican maquiladoras as case study. Comput Ind 65(4):761–773. doi:http://dx.doi.org/10.1016/j.compind.2014.02.013

Almomani MA, Aladeemy M, Abdelhadi A, Mumani A (2013) A proposed approach for setup time reduction through integrating conventional SMED method with multiple criteria decision-making techniques. Comput Ind Eng 66(2):461–469. doi:10.1016/j.cie.2013.07.011 CrossRef

Amasaka K (2007) Applying New JIT—Toyota’s global production strategy: epoch-making innovation of the work environment. Robot Comput Integr Manuf 23(3):285–293. doi:10.1016/j.rcim.2006.02.001 CrossRef

Amit RK, Mehta P, Tripathi RR (2015) Optimal shelf-space stocking policy using stochastic dominance under supply-driven demand uncertainty. Eur J Oper Res 246(1):339–342. doi:10.1016/j.ejor.2015.04.031 MathSciNetCrossRefMATH

Argilés-Bosch JM, Martí J, Monllau T, Garcia-Blandón J, Urgell T (2014) Empirical analysis of the incidence of accidents in the workplace on firms’ financial performance. Saf Sci 70:123–132. doi:10.1016/j.ssci.2014.05.012 CrossRef

Arıkan E, Fichtinger J, Ries JM (2014) Impact of transportation lead-time variability on the economic and environmental performance of inventory systems. Int J Prod Econ 157:279–288. doi:10.1016/j.ijpe.2013.06.005 CrossRef

Avelar-Sosa L, García-Alcaraz J, Vergara-Villegas OO, Maldonado-Macías AA, Alor-Hernández G (2015) Impact of traditional and international logistic policies in supply chain performance. Int J Adv Manuf Technol 76(5–8):913–925. doi:10.1007/s00170-014-6308-3 CrossRef

Bettayeb B, Bassetto SJ, Sahnoun M (2014) Quality control planning to prevent excessive scrap production. J Manuf Syst 33(3):400–411. doi:10.1016/j.jmsy.2014.01.001 CrossRef

Blaga P, Jozsef B (2014a) Human resources, quality circles and innovation. Procedia Econ Finan 15:1458–1462. doi:10.1016/S2212-5671(14)00611-X CrossRef

Blaga P, Jozsef B (2014b) Increasing human resource efficiency in the production process. Procedia Technol 12:469–475. doi:10.1016/j.protcy.2013.12.516 CrossRef

Caggiano A, Teti R (2012) Digital manufacturing cell design for performance increase. Procedia CIRP 2:64–69. doi:10.1016/j.procir.2012.05.041 CrossRef

Calvo-Mora A, Ruiz-Moreno C, Picón-Berjoyo A, Cauzo-Bottala L (2014) Mediation effect of TQM technical factors in excellence management systems. J Bus Res 67(5):769–774. doi:10.1016/j.jbusres.2013.11.042 CrossRef

Chakravorty SS (2009) Improving distribution operations: implementation of material handling systems. Int J Prod Econ 122(1):89–106. doi:10.1016/j.ijpe.2008.12.026 CrossRef

Chan FTS (2001) Effect of Kanban size on just-in-time manufacturing systems. J Mater Process Technol 116(2–3):146–160. doi:10.1016/S0924-0136(01)01022-6 CrossRef

Chen H, Jeter D (2008) The role of auditing in buyer-supplier relations. J Contemp Account Econ 4(1):1–17. doi:10.1016/S1815-5669(10)70027-8 CrossRef

Chen Y, Xiao Q, Tang X (2011) Product layout optimization and simulation model in a multi-level distribution center. Syst Eng Procedia 2:300–307. doi:10.1016/j.sepro.2011.10.042 CrossRef

Chiarini A (2013) The main methods of lean organization: Kanban, cellular manufacturing, SMED and TPM. In: Lean organization: from the tools of the toyota production system to lean office. Springer, Milan, pp 81–116

Chinniah Y (2015) Analysis and prevention of serious and fatal accidents related to moving parts of machinery. Saf Sci 75:163–173. doi:10.1016/j.ssci.2015.02.004 CrossRef

Chlivickas E (2014) International cooperation and innovations for developing human resources system. Procedia Soc Behav Sci 110:276–283. doi:10.1016/j.sbspro.2013.12.871 CrossRef

Crumpton MA (2015) 3—Human resources as a strategic partner. In: Crumpton MA (ed) Strategic human resources planning for academic libraries. Chandos Publishing, Oxford, pp 23–29CrossRef

Cua KO, McKone KE, Schroeder RG (2001) Relationships between implementation of TQM, JIT, and TPM and manufacturing performance. J Oper Manage 19(6):675–694. doi:10.1016/S0272-6963(01)00066-3 CrossRef

David I, Eben-Chaime M (2003) How far should JIT vendor–buyer relationships go? Int J Prod Econ 81–82:361–368. doi:10.1016/S0925-5273(02)00274-8 CrossRef

De Toni A, Nassimbeni G (2000) Just-in-time purchasing: an empirical study of operational practices, supplier development and performance. Omega 28(6):631–651. doi:http://dx.doi.org/10.1016/S0305-0483(00)00016-5

Deep K, Singh PK (2015) Design of robust cellular manufacturing system for dynamic part population considering multiple processing routes using genetic algorithm. J Manuf Syst 35:155–163. doi:10.1016/j.jmsy.2014.09.008 CrossRef

Dong Y, Carter CR, Dresner ME (2001) JIT purchasing and performance: an exploratory analysis of buyer and supplier perspectives. J Oper Manage 19(4):471–483. doi:10.1016/S0272-6963(00)00066-8 CrossRef

Dong JX, Lee CY, Song DP (2015) Joint service capacity planning and dynamic container routing in shipping network with uncertain demands. Transp Res Part B Methodol 78:404–421. doi:10.1016/j.trb.2015.05.005 CrossRef

Ertay T, Ruan D, Tuzkaya UR (2006) Integrating data envelopment analysis and analytic hierarchy for the facility layout design in manufacturing systems. Inf Sci 176(3):237–262. doi:10.1016/j.ins.2004.12.001 CrossRef

Farris JA, Van Aken EM, Doolen TL, Worley J (2009) Critical success factors for human resource outcomes in Kaizen events: an empirical study. Int J Prod Econ 117(1):42–65. doi:10.1016/j.ijpe.2008.08.051 CrossRef

Fernández FB, Pérez MÁS (2015) Analysis and modeling of new and emerging occupational risks in the context of advanced manufacturing processes. Procedia Eng 100:1150–1159. doi:10.1016/j.proeng.2015.01.478 CrossRef

Fiscus, JE (1987) Kanban and just-in-time at Toyota: Edited by the Japanese management association. Eng Manage Int 4(2):157. (trans: David JL. Productivity Press, Cambridge, MA, U.S.A., 1986. 192 pages, 40 figures, hardcover. ISBN 0-915299-08-0. List price: $29.95). doi:http://dx.doi.org/10.1016/0167-5419(87)90022-6

Fukukawa T, Hong SC (1993) The determination of the optimal number of Kanbans in a just-in-time production system. Comput Ind Eng 24(4):551–559. doi:10.1016/0360-8352(93)90197-6 CrossRef

Gilbert FW, Young JA, O’Neal CR (1994) Buyer-seller relationships in just-in-time purchasing environments. J Bus Res 29(2):111–120. doi:10.1016/0148-2963(94)90015-9 CrossRef

Glover WJ, Farris JA, Van Aken EM, Doolen TL (2011) Critical success factors for the sustainability of Kaizen event human resource outcomes: an empirical study. Int J Prod Econ 132(2):197–213. doi:10.1016/j.ijpe.2011.04.005 CrossRef

Gyulai D, Kádár B, Monostori L (2014) Capacity planning and resource allocation in assembly systems consisting of dedicated and reconfigurable lines. Procedia CIRP 25:185–191. doi:10.1016/j.procir.2014.10.028 CrossRef

Hajakbari MS, Minaei-Bidgoli B (2014) A new scoring system for assessing the risk of occupational accidents: a case study using data mining techniques with Iran’s Ministry of Labor data. J Loss Prev Process Ind 32:443–453. doi:10.1016/j.jlp.2014.10.013 CrossRef

Hong YS, Huh WT, Kang C (2015) Sourcing assemble-to-order inventories under supplier risk uncertainty. Omega. doi:http://dx.doi.org/10.1016/j.omega.2015.06.011

Hou TH, Hu WC (2011) An integrated MOGA approach to determine the Pareto-optimal Kanban number and size for a JIT system. Expert Syst Appl 38(5):5912–5918. doi:10.1016/j.eswa.2010.11.032 MathSciNetCrossRef

Huang CH, Lin PY (2014) Influence of spatial layout on airflow field and particle distribution on the workspace of a factory. Building Environ 71:212–222. doi:10.1016/j.buildenv.2013.09.014 CrossRef

Huang CY, Huang TS, Chen WL (2009) Communication protocols for order management in collaborative manufacturing. Int J Prod Econ 122(1):257–268. doi:10.1016/j.ijpe.2009.06.004 CrossRef

Humphreys P, Shiu WK, Lo VHY (2003) Buyer–supplier relationship: perspectives between Hong Kong and the United Kingdom. J Mater Process Technol 138(1–3):236–242. doi:10.1016/S0924-0136(03)00078-5 CrossRef

Huq Z (1999) Conventional shop control procedures to approximate JIT inventory performance in a job shop. J Manuf Syst 18(3):161–174. doi:10.1016/S0278-6125(99)80029-6 CrossRef

Huq Z, Huq F (1994) Embedding JIT in MRP: the case of job shops. J Manuf Syst 13(3):153–164. doi:10.1016/0278-6125(94)90001-9 CrossRef

Huumonen J (2011) Conceptualizing agility of enterprises. Hum Factors Ergon Manuf 21(2):132–146. doi:10.1002/hfm.20255 CrossRef

Inman R, Anthony RS, Sale KW, Jr G, Whitten D (2011) Agile manufacturing: relation to JIT, operational performance and firm performance. J Oper Manage 29(4):343–355. doi:10.1016/j.jom.2010.06.001 CrossRef

Jayaram J, Droge C, Vickery SK (1999) The impact of human resource management practices on manufacturing performance. J Oper Manage 18(1):1–20. doi:10.1016/S0272-6963(99)00013-3 CrossRef

Jensen JB, Malhotra MK, Philipoom PR (1996) Machine dedication and process flexibility in a group technology environment. J Oper Manage 14(1):19–39. doi:10.1016/0272-6963(95)00030-5 CrossRef

Ji M, Guo W, Zhu H, Yang Y (2015) Optimization of loading sequence and rehandling strategy for multi-quay crane operations in container terminals. Transp Res Part E Logistics Transp Rev 80:1–19. doi:10.1016/j.tre.2015.05.004 CrossRef

Jiang Y, Seidmann A (2014) Capacity planning and performance contracting for service facilities. Decis Support Syst 58:31–42. doi:10.1016/j.dss.2013.01.010 CrossRef

Kassicieh SK, Yourstone SA (1998) Training, performance evaluation, rewards, and TQM implementation success. J Qual Manage 3(1):25–38. doi:10.1016/S1084-8568(99)80102-3 CrossRef

Kemal Karasu M, Cakmakci M, Cakiroglu MB, Ayva E, Demirel-Ortabas N (2014) Improvement of changeover times via Taguchi empowered SMED/case study on injection molding production. Measurement 47:741–748. doi:10.1016/j.measurement.2013.09.035 CrossRef

Kia R, Khaksar-Haghani F, Javadian N, Tavakkoli-Moghaddam R (2014) Solving a multi-floor layout design model of a dynamic cellular manufacturing system by an efficient genetic algorithm. J Manuf Syst 33(1):218–232. doi:10.1016/j.jmsy.2013.12.005 CrossRef

Kim I, Tang CS (1997) Lead time and response time in a pull production control system. Eur J Oper Res 101(3):474–485. doi:10.1016/S0377-2217(96)00174-9 CrossRefMATH

Kim SL, Ha D (2003) A JIT lot-splitting model for supply chain management: enhancing buyer–supplier linkage. Int J Prod Econ 86(1):1–10. doi:10.1016/S0925-5273(03)00006-9 CrossRef

Knechtges P, Decker MC (2014) Application of kaizen methodology to foster departmental engagement in quality improvement. J Am Coll Radiol 11(12, Part A):1126–1130. doi:http://dx.doi.org/10.1016/j.jacr.2014.08.027

Konecny PA, Thun JH (2011) Do it separately or simultaneously—An empirical analysis of a conjoint implementation of TQM and TPM on plant performance. Int J Prod Econ 133(2):496–507. doi:10.1016/j.ijpe.2010.12.009 CrossRef

Kouki C, Jouini O (2015) On the effect of lifetime variability on the performance of inventory systems. Int J Prod Econ 167:23–34. doi:10.1016/j.ijpe.2015.05.007 CrossRef

Kumar SV, Mani VGS, Devraj N (2014) Production planning and process improvement in an impeller manufacturing using scheduling and OEE techniques. Procedia Mater Sci 5(0):1710–1715. doi:http://dx.doi.org/10.1016/j.mspro.2014.07.360

Kumiega A, Van Vliet B (2008) 30—Kaizen: continuous improvement. In: Kumiega A, Van Vliet B (eds) Quality money management. Academic Press, Burlington, pp 271–277CrossRef

Kwak TC, Kim JS, Moon C (2006) Supplier–buyer models for the bargaining process over a long-term replenishment contract. Comput Ind Eng 51(2):219–228. doi:10.1016/j.cie.2006.02.004 CrossRef

Lage JM, Filho G (2010) Variations of the Kanban system: literature review and classification. Int J Prod Econ 125(1):13–21. doi:http://dx.doi.org/10.1016/j.ijpe.2010.01.009

Lagemann H, Meier H (2014) Robust capacity planning for the delivery of industrial product-service systems. Procedia CIRP 19:99–104. doi:10.1016/j.procir.2014.05.021 CrossRef

Lee CY, Johnson AL (2012) Two-dimensional efficiency decomposition to measure the demand effect in productivity analysis. Eur J Oper Res 216(3):584–593. doi:10.1016/j.ejor.2011.08.004 CrossRef

Lemak DJ, Reed R (1997) Commitment to total quality management: Is there a relationship with firm performance? J Qual Manage 2(1):67CrossRef

Lengnick-Hall ML, Lengnick-Hall CA, Rigsbee CM (2013) Strategic human resource management and supply chain orientation. Hum Resour Manage Rev 23(4):366–377. doi:10.1016/j.hrmr.2012.07.002 CrossRef

Liberopoulos G, Koukoumialos S (2005) Tradeoffs between base stock levels, numbers of Kanbans, and planned supply lead times in production/inventory systems with advance demand information. Int J Prod Econ 96(2):213–232. doi:10.1016/j.ijpe.2004.04.006 CrossRef

Liu H, Hwang SL, Liu TH (2009) Economic assessment of human errors in manufacturing environment. Saf Sci 47(2):170–182. doi:10.1016/j.ssci.2008.04.006 CrossRef

Lortie M (2012) Analysis of the circumstances of accidents and impact of transformations on the accidents in a beverage delivery company. Saf Sci 50(9):1792–1800. doi:10.1016/j.ssci.2012.04.008 CrossRef

Lovell MC (2003) Optimal lot size, inventories, prices and JIT under monopolistic competition. Int J Prod Econ 81–82:59–66. doi:10.1016/S0925-5273(02)00349-3 CrossRef

Lummus RR (1995) A simulation analysis of sequencing alternatives for JIT lines using Kanbans. J Oper Manage 13(3):183–191. doi:10.1016/0272-6963(95)00026-O CrossRef

Macbeth DK, Baxter LF, Farguson N, Neil GC (1988) Buyer-Vendor Relationship with Just-in-Time: lessons from US multinationals. Ind Eng 20(9):38–41

Marodin GA, Saurin TA, Tortorella GL, Denicol J (2015) How context factors influence lean production practices in manufacturing cells. Int J Adv Manuf Technol 79(5–8):1389–1399. doi:10.1007/s00170-015-6944-2 CrossRef

Martínez-Jurado PJ, Moyano-Fuentes J, Jerez-Gómez P (2014) Human resource management in lean production adoption and implementation processes: success factors in the aeronautics industry. BRQ Bus Res Q 17(1):47–68. doi:10.1016/j.cede.2013.06.004 CrossRef

Myung YS, Moon I (2014) A network flow model for the optimal allocation of both foldable and standard containers. Oper Res Lett 42(6–7):484–488. doi:10.1016/j.orl.2014.08.004 MathSciNetCrossRef

Nen M (2015) Professional insertion of highly qualified human resources. Case study—Romania. Procedia Soc Behav Sci 191:1891–1896. doi:10.1016/j.sbspro.2015.04.615 CrossRef

Nenonen S (2011) Fatal workplace accidents in outsourced operations in the manufacturing industry. Saf Sci 49(10):1394–1403. doi:10.1016/j.ssci.2011.06.004 CrossRef

Niskanen T, Lauttalammi J (1989) Accidents in materials handling at building construction sites. J Occup Accidents 11(1):1–17. doi:10.1016/0376-6349(89)90002-3 CrossRef

Ohno K (2011) The optimal control of just-in-time-based production and distribution systems and performance comparisons with optimized pull systems. Eur J Oper Res 213(1):124–133. doi:10.1016/j.ejor.2011.03.005 MathSciNetCrossRefMATH

Ohno H, Matsubae K, Nakajima K, Kondo Y, Nakamura S, Nagasaka T (2015) Toward the efficient recycling of alloying elements from end of life vehicle steel scrap. Resour Conserv Recycl 100:11–20. doi:10.1016/j.resconrec.2015.04.001 CrossRef

Oropesa-Vento M, García-Alcaraz JL, Rivera L, Manotas DF (2015) Effects of management commitment and organization of work teams on the benefits of Kaizen: Planning stage. DYNA 82(191):76–84

Pan JN, Nguyen HTN (2015) Achieving customer satisfaction through product–service systems. Eur J Oper Res 247(1):179–190. doi:10.1016/j.ejor.2015.05.018 CrossRef

Panayiotou CG, Cassandras CG (1999) Optimization of Kanban-based manufacturing systems. Automatica 35(9):1521–1533. doi:10.1016/S0005-1098(99)00074-6 MathSciNetCrossRefMATH

Pattanaik LN, Sharma BP (2009) Implementing lean manufacturing with cellular layout: a case study. Int J Adv Manuf Technol 42(7–8):772–779. doi:10.1007/s00170-008-1629-8 CrossRef

Pourbabai B (1988) A just-in-time/group technology based scheduling model. In: Radharamanan R (ed) Robotics and factories of the future ’87. Springer, Berlin Heidelberg, pp 105–110CrossRef

Power D, Sohal AS (2000) Human resource management strategies and practices in just-in-time environments: Australian case study evidence. Technovation 20(7):373–387. doi:10.1016/S0166-4972(99)00151-0 CrossRef

Pragman CH (1996) JIT II: a purchasing concept for reducing lead times in time-based competition. Bus Horiz 39(4):54–58. doi:10.1016/S0007-6813(96)90052-X CrossRef

Radharamanan R, Godoy LP, Watanabe KI (1996) Quality and productivity improvement in a custom-made furniture industry using Kaizen. Comput Ind Eng 31(1–2):471–474. doi:10.1016/0360-8352(96)00177-5 CrossRef

Ragin-Skorecka K (2014) Agile enterprise: a human factors perspective. Hum Factors Ergon Manuf. doi:10.1002/hfm.20610

Rahman NAA, Sharif SM, Esa MM (2013a) Lean manufacturing case study with Kanban system implementation. Procedia Econ Finan 7:174–180. doi:http://dx.doi.org/10.1016/S2212-5671(13)00232-3

Rahman NAA, Sharif SM, Esa MM (2013b) Lean manufacturing case study with Kanban system implementation. Procedia Econ Finan 7(0):174–180. doi:http://dx.doi.org/10.1016/S2212-5671(13)00232-3

Recht R, Wilderom C (1998) Kaizen and culture: on the transferability of Japanese suggestion systems. Int Bus Rev 7(1):7–22. doi:10.1016/S0969-5931(97)00048-6 CrossRef

Reda HM (1987) A review of “Kanban”—the Japanese “just-in-time” production system. Eng Manage Int 4(2):143–150. doi:10.1016/0167-5419(87)90019-6 CrossRef

Ruckart PZ, Burgess PA (2007) Human error and time of occurrence in hazardous material events in mining and manufacturing. J Hazardous Mater 142(3):747–753. doi:10.1016/j.jhazmat.2006.06.117 CrossRef

Rusu G, Avasilcai S (2014) Linking human resources motivation to organizational climate. Procedia Soc Behav Sci 124:51–58. doi:10.1016/j.sbspro.2014.02.459 CrossRef

Sargent J, Matthews L (2009) China versus Mexico in the global EPZ industry: Maquiladoras, FDI quality, and plant mortality. World Dev 37(6):1069–1082. doi:10.1016/j.worlddev.2008.10.002 CrossRef

Schaefer B, Konur D (2015) Economic and environmental considerations in a continuous review inventory control system with integrated transportation decisions. Transp Res Part E Logistics Transp Rev 80:142–165. doi:10.1016/j.tre.2015.05.006 CrossRef

Selçuk B (2013) Adaptive lead time quotation in a pull production system with lead time responsive demand. J Manuf Syst 32(1):138–146. doi:10.1016/j.jmsy.2012.07.017 MathSciNetCrossRef

Spencer MS (1998) Group technology at John Deere: production planning and control issues. In: Suresh NC, Kay JM (eds) Group technology and cellular manufacturing. Springer, US, pp 501–516CrossRef

Špicar R, Januška M (2015) Use of Monte Carlo modified Markov Chains in capacity planning. Procedia Eng 100:953–959. doi:10.1016/j.proeng.2015.01.454 CrossRef

Sundar R, Balaji AN, Satheesh Kumar RM (2014) A review on lean manufacturing implementation techniques. Procedia Eng 97:1875–1885. doi:10.1016/j.proeng.2014.12.341 CrossRef

Sylvain L, Duguay R (1997) Integrating MRP, KANBAN and bar coding system to achieve JIT procurement. Prod Inventory Manage J First Q:18–26

Tabassi AA, Abu Bakar AH (2009) Training, motivation, and performance: the case of human resource management in construction projects in Mashhad, Iran. Int J Project Manage 27(5):471–480. doi:10.1016/j.ijproman.2008.08.002 CrossRef

Teagarden MB, Butler MC, Von Glinow MA (1992) Mexico’s maquiladora industry: Where strategic human resource management makes a difference. Organ Dyn 20(3):34–47. doi:10.1016/0090-2616(92)90023-G CrossRef

Thomas AJ, Jones GR, Vidales P (2006) An integrated approach to TPM and six sigma development in the castings industry. In: Pham DT, Eldukhri EE, Soroka AJ (eds) Intelligent production machines and systems. Elsevier Science Ltd., Oxford, pp 620–625CrossRef

van der Laan E, Salomon M, Dekker R (1999) An investigation of lead-time effects in manufacturing/remanufacturing systems under simple PUSH and PULL control strategies. Eur J Oper Res 115(1):195–214. doi:10.1016/S0377-2217(98)00108-8 CrossRefMATH

Villa A, Taurino T (2013) From JIT to seru, for a production as lean as possible. Procedia Eng 63:956–965. doi:10.1016/j.proeng.2013.08.172 CrossRef

Williams DJ (1991) 1—An introduction to the manufacturing cell and its integration and control. In: WilliamsPaul Rogers DJ (eds) Manufacturing cells. Newnes, pp 1–9

Wu Z, Jianghua W (2015) Price discount and capacity planning under demand postponement with opaque selling. Decis Support Syst 76:24–34. doi:10.1016/j.dss.2015.02.002 CrossRef

Yalcin A (2004) Supervisory control of automated manufacturing cells with resource failures. Robot Comput Integr Manuf 20(2):111–119. doi:10.1016/j.rcim.2003.10.001 MathSciNetCrossRef

Titel: Causal Models of JIT Elements Associated with Production Process and the Obtained Benefits
verfasst von: Jorge Luis García-Alcaraz
Aidé Aracely Maldonado-Macías
Verlag: Springer International Publishing
Buch: Just-in-Time Elements and Benefits
Print ISBN: 978-3-319-25917-8

Electronic ISBN: 978-3-319-25919-2

Copyright-Jahr: 2016
DOI: https://doi.org/10.1007/978-3-319-25919-2_11

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Wirtschaft"

Springer Professional "Technik"