nach oben

Erschienen in:

2021 | OriginalPaper | Buchkapitel

Cavitation Micro-mechanisms in Silica-Filled Styrene-Butadiene Rubber Upon Fatigue and Cyclic Tensile Testing

verfasst von : C. E. Federico, H. R. Padmanathan, O. Kotecky, R. Rommel, G. Rauchs, Y. Fleming, F. Addiego, S. Westermann

Erschienen in: Fatigue Crack Growth in Rubber Materials

Verlag: Springer International Publishing

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

A multiscale approach was proposed to investigate cavitation micro-mechanisms developing in silica-filled styrene-butadiene rubber exposed to fatigue and cyclic tensile testing. At the macro-/mesoscopic scale, a decrease in load amplitude observed in fatigue was corroborated with cavitation micro-mechanisms initiated by silica agglomerate-rubber debonding and silica agglomerate breakdown. In the case of cyclic tensile testing, a gradual decrease of Poisson’s ratio was correlated at the microscopic scale by similar cavitation micro-mechanisms than in fatigue. Both fatigue and cyclic tensile behaviors were considerably affected by an applied thermal treatment of the compound enhancing cavitation (especially agglomerate breakdown).

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel Critical Plane Analysis of Rubber

Nächstes Kapitel New Approaches to Modeling Failure and Fracture of Rubberlike Materials

Mars W, Fatemi A (2002) A literature survey on fatigue analysis approaches for rubber. Int J Fatigue 24:949–961. https://doi.org/10.1016/S0142-1123(02)00008-7CrossRef

Saintier N, Cailletaud G, Piques R (2006) Crack initiation and propagation under multiaxial fatigue in a natural rubber. Int J Fatigue 28:61–72CrossRef

Guo Q, Zaïri F, Ovalle Rodas C, Guo X (2018) Constitutive modeling of the cyclic dissipation in thin and thick rubber specimens. ZAMM Zeitschrift fur Angew Math und Mech 98:1878–1899. https://doi.org/10.1002/zamm.201800087CrossRef

Chen L, Zhou W, Lu J, Li J, Zhang W, Huang N, Wu L, Li L (2015) Unveiling reinforcement and toughening mechanism of filler network in natural rubber with synchrotron radiation X-ray nano-computed tomography. Macromolecules 48:7923–7928. https://doi.org/10.1021/acs.macromol.5b01301CrossRef

Mullins L (1969) Softening of rubber by deformation. Rubber Chem Technol 42:339–362. https://doi.org/10.5254/1.3539210CrossRef

Diani J, Fayolle B, Gilormini P (2009) A review on the Mullins effect. Eur Polym J 45:601–612. https://doi.org/10.1016/j.eurpolymj.2008.11.017CrossRef

Payne AR (1962) The dynamic properties of carbon black loaded natural rubber vulcanizates. Part II. J Appl Polym Sci 6:368–372. https://doi.org/10.1002/app.1962.070062115CrossRef

Heinrich G, Klüppel M (2007) Recent advances in the theory of filler networking in elastomers. Fill Elastomers Drug Deliv Syst 160:1–44. https://doi.org/10.1007/3-540-45362-8_1CrossRef

Weng G, Chang A, Fu K, Kang J, Ding Y, Chen Z (2016) Crack growth mechanism of styrene-butadiene rubber filled with silica nanoparticles studied by small angle X-ray scattering. RSC Adv 6:8406–8415. https://doi.org/10.1039/c5ra26238kCrossRef

10.

Huneau B, Marco Y, Saux VL, Charrier P (2016) Fatigue crack initiation in a carbon black-filled natural rubber. Rubber Chem Technol 89:126–141. https://doi.org/10.5254/rct.15.84809CrossRef

11.

Byers JT (2002) Fillers for balancing passenger tire tread properties. Rubber Chem Technol 75:527–548. https://doi.org/10.5254/1.3547681CrossRef

12.

Gent AN, Lindley PB, Thomas AG (1964) Cut growth and fatigue of rubbers. I. The relationship between cut growth and fatigue. J Appl Polym Sci:455–466. https://doi.org/10.1002/app.1964.070080129

13.

Robisson A, Laraba-Abbès F Laïarinandrasana L, Piques R, Chaverot JL (2000) Fatigue lifetime of a silica filled rubber. Application to a SBR shoe sole under bending. In: 13th European conference on fracture. San Sebastian

14.

Sutton MA, Orteu J-J, Schreier HW (2009) Image correlation for shape, motion and deformation measurements: basic concepts, theory and applications. Springer, Boston. https://doi.org/10.1007/978-0-387-78747-3CrossRef

15.

G’Sell C, Hiver JM, Dahoun A (2002) Experimental characterization of deformation damage in solid polymers under tension, and its interrelation with necking. Int J Solids Struct 39:3857–3872. https://doi.org/10.1016/S0020-7683(02)00184-1CrossRef

16.

Billon N (2012) New constitutive modeling for time-dependent mechanical behavior of polymers close to glass transition: fundamentals and experimental validation. J Appl Polym Sci. https://doi.org/10.1002/app.36598

17.

Federico CE, Bouvard JL, Combeaud C, Billon N (2018) Large strain/time dependent mechanical behaviour of PMMAs of different chain architectures. Application of time-temperature superposition principle. Polymer (Guildf) 139:177–187. https://doi.org/10.1016/j.polymer.2018.02.021CrossRef

18.

Candau N, Pradille C, Bouvard JL, Billon N (2016) On the use of a four-cameras stereovision system to characterize large 3D deformation in elastomers. Polym Test 56:314–320. https://doi.org/10.1016/j.polymertesting.2016.10.017CrossRef

19.

Narynbek Ulu K, Huneau B, Le Gac P-Y, Verron E (2016) Fatigue resistance of natural rubber in seawater with comparison to air. Int J Fatigue 88:247–256. https://doi.org/10.1016/j.ijfatigue.2016.03.033CrossRef

20.

Schörne K (2012) Development of methods for scatter artifact correction in industrial X-ray cone-beam computed tomography. Technical University of Munich, Munich

21.

Gu J, Hacker GW (1994) Modern methods in analytical morphology. Springer, Boston. https://doi.org/10.1007/978-1-4615-2532-5CrossRef

22.

Cromey DW (2010) Use and manipulation of scientific digital images. Sci Eng Ethics 16:639–667. https://doi.org/10.1007/s11948-010-9201-yCrossRefPubMedPubMedCentral

23.

Hainsworth SV (2007) An environmental scanning electron microscopy investigation of fatigue crack initiation and propagation in elastomers. Polym Test 26:60–70. https://doi.org/10.1016/j.polymertesting.2006.08.007CrossRef

24.

Glanowski T, Huneau B, Marco Y, Le Saux V, Champy C, Charrier P (2018) Fatigue initiation mechanisms in elastomers: a microtomography-based analysis. MATEC Web Conf 165:1–7. https://doi.org/10.1051/matecconf/201816508005CrossRef

25.

Tee YL, Loo MS, Andriyana A (2018) Recent advances on fatigue of rubber after the literature survey by Mars and Fatemi in 2002 and 2004. Int J Fatigue. https://doi.org/10.1016/j.ijfatigue.2018.01.007

26.

Ismail H, Muniandy K, Othman N (2012) Fatigue life, morphological studies, and thermal aging of rattan powder-filled natural rubber composites as a function of filler loading and a silane coupling agent. Bioresources 7:841–858. https://doi.org/10.15376/biores.7.1.0841-0858CrossRef

27.

Ngolemasango FE, Bennett M, Clarke J (2008) Degradation and life prediction of a natural rubber engine mount compound. J Appl Polym Sci 110:348–355. https://doi.org/10.1002/app.28424CrossRef

28.

Suzuki N, Yatsuyanagi F, Ito M, Kaidou H (2002) Effects of surface chemistry of silica particles on secondary structure and tensile properties of silica-filled rubber systems. J Appl Polym Sci 86:1622–1629. https://doi.org/10.1002/app.11050CrossRef

29.

Merckel Y, Brieu M, Diani J (2012) A Mullins softening criterion for general loading conditions. J Mech Phys Solids 60:1257–1264CrossRef

30.

Diaz R, Diani J, Gilormini P (2014) Physical interpretation of the Mullins softening in a carbon-black filled SBR. Polymer (Guildf) 55:4942–4947. https://doi.org/10.1016/j.polymer.2014.08.020CrossRef

31.

Chrysochoos A (2012) Thermomechanical analysis of the cyclic behavior of materials. Proc IUTAM 4:15–26. https://doi.org/10.1016/j.piutam.2012.05.003CrossRef

32.

Loukil MT, Corvec G, Robin E, Miroir M, Le Cam JB, Garnier P (2018) Stored energy accompanying cyclic deformation of filled rubber. Eur Polym J 98:448–455. https://doi.org/10.1016/j.eurpolymj.2017.11.035CrossRef

33.

Ilseng A, Skallerud BH, Clausen AH (2017) An experimental and numerical study on the volume change of particle-filled elastomers in various loading modes. Mech Mater 106:44–57. https://doi.org/10.1016/j.mechmat.2017.01.007CrossRef

34.

Klüppel M (2009) The role of filler networking in fatigue crack propagation of elastomers under high-severity conditions. Macromol Mater Eng 294:130–140. https://doi.org/10.1002/mame.200800263CrossRef

35.

Starkova O, Aniskevich A (2010) Poisson’s ratio and the incompressibility relation for various strain measures with the example of a silica-filled SBR rubber in uniaxial tension tests. Polym Test 29:310–318. https://doi.org/10.1016/j.polymertesting.2009.12.005CrossRef

36.

Howse S, Porter C, Mengistu T, Pazur RJ (2018) Experimental determination of the quantity and distribution of chemical crosslinks in unaged and aged natural rubber, part 1: peroxide vulcanization. Polym Test 70:263–274. https://doi.org/10.1016/j.polymertesting.2018.07.002CrossRef

37.

Candau N, Oguz O, Peuvrel-Disdier E, Bouvard JL, Pradille C, Billon N (2019) Strain-induced network chains damage in carbon black filled EPDM. Polymer (Guildf) 175:329–338. https://doi.org/10.1016/j.polymer.2019.05.017CrossRef

38.

Zhang B, Yu X, Gu B (2018) Modeling and experimental validation of interfacial fatigue damage in fiber-reinforced rubber composites. Polym Eng Sci 58:920–927. https://doi.org/10.1002/pen.24646CrossRef

39.

Gauthier C, Reynaud E, Vassoille R, Ladouce-Stelandre L (2004) Analysis of the non-linear viscoelastic behaviour of silica filled styrene butadiene rubber. Polymer (Guildf) 45:2761–2771. https://doi.org/10.1016/j.polymer.2003.12.081CrossRef

Titel: Cavitation Micro-mechanisms in Silica-Filled Styrene-Butadiene Rubber Upon Fatigue and Cyclic Tensile Testing
verfasst von: C. E. Federico
H. R. Padmanathan
O. Kotecky
R. Rommel
G. Rauchs
Y. Fleming
F. Addiego
S. Westermann
Verlag: Springer International Publishing
Buch: Fatigue Crack Growth in Rubber Materials
Print ISBN: 978-3-030-68919-3

Electronic ISBN: 978-3-030-68920-9

Copyright-Jahr: 2021
DOI: https://doi.org/10.1007/12_2020_70

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht