nach oben

Erschienen in:

2020 | OriginalPaper | Buchkapitel

Characterising the Performance of a Non-Portland Binder Using Analytical Techniques

verfasst von : Monower Sadique, Hassan Al-Nageim

Erschienen in: Advances in Sustainable Construction Materials and Geotechnical Engineering

Verlag: Springer Singapore

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The development and production of new materials require advanced analytical characterisation to explain the relation between the physicochemical structure of the material and its properties. Highly integrated microelectronic structure analysis of surfaces with laser beams and x-ray fluorescence-aided devices is found to be helpful for providing important information, including the interrelationships between physical, chemical, mechanical and durability characteristics of the new developed products. In most instances, no single technique provides all the needed information, and hence, simultaneous application of several techniques becomes necessary. This study was aimed for analysis, characterisation and evaluation of a new novel non-Portland cementitious binder in anhydrous and hydrated states using XRD, FT-IR and TG/DTA.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 340 Zeitschriften

aus folgenden Fachgebieten:

Bauwesen + Immobilien
Business IT + Informatik
Finance + Banking
Management + Führung
Marketing + Vertrieb
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel Developing a Premium Cementitious Filler Incorporating High Content of Sewage Sludge Fly Ash

Nächstes Kapitel Predicting the Dynamic Properties of Plain Concrete Under the Impact Load

Filho RDT et al (2007) Potential for use of crushed waste calcined-clay brick as a supplementary cementitious material in Brazil. Cem Concr Res 37(9):1357–1365CrossRef

Rodriguez Largo O et al (2009) Novel use of kaolin wastes in blended cements. J Am Ceram Soc 92(10):2443–2446CrossRef

Erdem TK et al (2007) Use of perlite as a pozzolanic addition in producing blended cements. Cem Concr Compos 29(1):13–21MathSciNetCrossRef

Yilmaz B, Ediz N (2008) The use of raw and calcined diatomite in cement production. Cem Concr Compos 30(3):202–211CrossRef

Bertolini L et al (2004) MSWI ashes as mineral additions in concrete. Cem Concr Res 34(10):1899–1906CrossRef

Lampris C, Stegemann JA Cheeseman CR (2009) Comparison of the physical properties and leaching characteristics of apc residues solidified using portland cement and ground granulated blast furnace slag, In: Wascon conference 2009: France

Johnson A, Catalan LJJ, Kinrade SD (2010) Characterization and evaluation of fly-ash from co-combustion of lignite and wood pellets for use as cement admixture. Fuel 89(10):3042–3050CrossRef

Udoeyo FF et al (2006) Potential of wood waste ash as an additive in concrete. J Mater Civ Eng 18(4):605–611CrossRef

Adesanya DA, Raheem AA (2009) Development of corn cob ash blended cement. Constr Build Mater 23(1):347–352CrossRef

10.

Ganesan K, Rajagopal K, Thangavel K (2008) Rice husk ash blended cement: assessment of optimal level of replacement for strength and permeability properties of concrete. Constr Build Mater 22(8):1675–1683CrossRef

11.

Mozaffari E et al (2009) An investigation into the strength development of wastepaper sludge ash blended with ground granulated blastfurnace slag. Cem Concr Res 39(10):942–949CrossRef

12.

Osborne GJ (1999) Durability of Portland blast-furnace slag cement concrete. Cem Concr Compos 21(1):11–21CrossRef

13.

Grasserbauer M (1989) Materials analysis in high technology—from analytical chemistry to analytical science. TrAC Trends Anal Chem 8(6):191CrossRef

14.

Mollah MYA et al (2000) A fourier transform infrared spectroscopic investigation of the early hydration of Portland cement and the influence of sodium lignosulfonate. Cem Concr Res 30(2):267–273CrossRef

15.

Kaminskas R, Mituzas J, Kaminskas A (2006) The effect of pozzolana on the properties of the finest fraction of separated Portland cement—part 1. Ceram-Silik 50(1):15–21

16.

Ylmén R et al (2009) Early hydration and setting of Portland cement monitored by IR, SEM and Vicat techniques. Cem Concr Res 39(5):433–439CrossRef

17.

Singh NB et al (2002) Effect of lignosulfonate, calcium chloride and their mixture on the hydration of RHA-blended Portland cement. Cem Concr Res 32(3):387–392CrossRef

18.

Tkaczewska E, Małolepszy J (2009) Hydration of coal–biomass fly ash cement. Constr Build Mater 23(7):2694–2700CrossRef

19.

Esteves LP (2011) On the hydration of water-entrained cement–silica systems: combined SEM, XRD and thermal analysis in cement pastes. Thermochim Acta 518(1–2):27–35CrossRef

20.

Kourounis S et al (2007) Properties and hydration of blended cements with steelmaking slag. Cem Concr Res 37(6):815–822CrossRef

21.

Ghosh SN (2001) 5—IR spectroscopy, in handbook of analytical techniques in concrete science and technology. In: Ramachandran VS, James JB (ed) William Andrew Publishing: Norwich, NY, pp 174–204

22.

Bensted J, Varma SP (1974) Some applications of Infrared and Raman spectroscopy in cement chemistry. Cem Technol 5(4):378–382

23.

Taylor HFW (1997) Hydration of Portland cement, in cement chemistry. In: Taylor HFW (ed) Thomas Telford: London

24.

Qian JS, Shi CJ, Wang Z (2001) Activation of blended cements containing fly ash. Cem Concr Res 31(8):1121–1127CrossRef

25.

Xu AM, Sarkar SL (1991) Microstructural study of gypsum activated fly-ash hydration in cement paste. Cem Concr Res 21(6):1137–1147CrossRef

26.

Poon CS et al (2001) Activation of fly ash/cement systems using calcium sulfate anhydrite (CaSO4). Cem Concr Res 31(6):873–881CrossRef

Titel: Characterising the Performance of a Non-Portland Binder Using Analytical Techniques
verfasst von: Monower Sadique
Hassan Al-Nageim
Verlag: Springer Singapore
Buch: Advances in Sustainable Construction Materials and Geotechnical Engineering
Print ISBN: 978-981-13-7479-1

Electronic ISBN: 978-981-13-7480-7

Copyright-Jahr: 2020
DOI: https://doi.org/10.1007/978-981-13-7480-7_20

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Springer Professional "Wirtschaft"