nach oben

Erschienen in:

2021 | OriginalPaper | Buchkapitel

Comparison of Bitumen Modified by Phenol Formaldehyde Resins Synthesized from Different Raw Materials

verfasst von : Yuriy Demchuk, Volodymyr Gunka, Iurii Sidun, Sergii Solodkyy

Erschienen in: Proceedings of EcoComfort 2020

Verlag: Springer International Publishing

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Phenol formaldehyde resins were obtained by polycondensation of a mixture of phenols (technical or “raw” phenols) obtained from the phenolic fraction of coal tar. The resulting resin approximately consists of 1/3 of phenol and 2/3 of cresols. The obtained resins were compared with industrial phenol formaldehyde resins, the raw material of which is pure (synthetic) phenol. The possibility of using the obtained resins as modifiers of road petroleum bitumen has been established, especially as adhesive promoters to bitumen. It is shown that the addition of these resins significantly increases the adhesion to the surface of granite rubble and glass. Adhesion to the glass surface increases for PhCR-F from 33 to 87%; for Iditol from 33 to 90% and adhesion to the crushed stone surface for PhCR-F from mark 3 to mark 5; for Iditol from mark 3 to mark 5. This indicates that PhCR-F and Iditol can used as adhesive additives for oil road bitumen

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 340 Zeitschriften

aus folgenden Fachgebieten:

Bauwesen + Immobilien
Business IT + Informatik
Finance + Banking
Management + Führung
Marketing + Vertrieb
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel Methods of Reinforcing for Engineering Restoration of Architectural Monuments

Nächstes Kapitel The Influence of Concrete Structure on the Destruction of Reinforced Concrete Bended Elements

Kowalski, K.: Eco-friendly materials for a new concept of asphalt pavement. Transp. Res. Procedia 14, 3582–3591 (2016)CrossRef

Pyshyev, S.: Polymer modified Bitumen: Review. Chem. Chem. Technol. 10(4s), 631–636 (2016)CrossRef

Hrynchuk, Y.: Epoxide of rapeseed oil-modifier for bitumen and asphalt concrete. Pet. Coal 61(4), 836–842 (2019)

Çubuk, M.: Rheological properties and performance evaluation of phenol-formaldehyde modified bitumen. J. Mater. Civ. Eng. 26(6) (2014)

Gupta, A.: Comparative study of conventional and bakelite modified bituminious mix. Int. J. Civ. Eng. Tech. 10(3), 1386–1392 (2019)

Saha, S.: Characterization of bakelite-modified bitumen. Innovative Infrastruct. Solutions 2(3) (2017)

Yanru, X.: Research status, industrial application demand and prospects of phenolic resin. Royal Soc. Chem. 9, 28924–28935 (2019)

Pyshyev, S.: Production of indene-coumarone resins as bitumen modifiers. Petrol. Coal 57(4), 303–314 (2015)

Pyshyev, S.: Oil and gas processing products to obtain polymers modified bitumen. Int. J. Pavement Res. Tech. 10(4), 289–296 (2017)CrossRef

10.

Demchuk, Y.: Obtaining the modifiers of road bitumen from phenol fraction of coal tar. Coal Chem. J. 5, 23–28 (2017)

11.

Demchuk, Y.: Effect of phenol-cresol-formaldehyde resin on adhesive and physicomechanical properties of road bitumen. Chem. Chem. Technol. 12(4), 456–461 (2018)CrossRef

12.

Gunka, V.: The selection of raw materials for the production of road bitumen modified by phenol-cresol-formaldehyde resins. Petrol. Coal 60(6), 1199–1206 (2018)

13.

Pyshyev, S.: Influence of the amount of catalyst on the process of receiving modifiers of road bitumens from phenol fraction of coal tar. Coal Chem. J. 4, 27–33 (2019)

14.

Pyshyev, S.: Development of mathematical model and Identification of optimal conditions to obtain phenol-cresol-formaldehyde resin. Chem. Chem. Technol. 2, 212–217 (2019)CrossRef

15.

CEN (European Committee for Standardization): Bitumen and bituminous binders. Determination of the softening point. Ring and Ball method. DSTU EN 1427:2018 (2018)

16.

CEN (European Committee for Standardization): Bitumen and bituminous binders. Determination of needle penetration. DSTU EN 1426:2018 (2018)

17.

CEN (European Committee for Standardization): Bitumen and bituminous binders. Determination of the tensile properties of bituminous binders by the tensile test method. DSTU EN 13587:2018 (2018)

18.

CEN (European Committee for Standardization): Bitumen and bituminous binders. Determination of the Fraas breaking point. DSTU EN 12593:2018 (2018d)

19.

DSTU (National Standard of Ukraine): Viscous road oil bitumens. The method to determine the index of engagement with the surface of glass and rock materials. DSTU B V.2.7-81-98 (1998)

20.

DSTU (National Standard of Ukraine): Bitumen and bituminous binders. Method for determining adhesion to crushed stone. DSTU 8787:2018 (2018)

21.

Gunka, V, Sidun, I, Solodkyy, S, Vytrykush, N.: Hot asphalt concrete with application of formaldehyde modified bitumen. In: Blikharskyy, Z., Koszelnik, P., Mesaros, P. (eds.) Proceedings of CEE 2019, CEE 2019, LNCE, vol. 47, pp. 111–118. Springer, Cham (2020)

22.

Sobol, K., Blikharskyy, Z., Petrovska, N., Terlyha, V.: Analysis of structure formation peculiarities during hydration of oil-well cement with zeolitic tuff and metakaolin additives. Chem. Chem. Technol. 8, 461–465 (2014)CrossRef

Titel: Comparison of Bitumen Modified by Phenol Formaldehyde Resins Synthesized from Different Raw Materials
verfasst von: Yuriy Demchuk
Volodymyr Gunka
Iurii Sidun
Sergii Solodkyy
Verlag: Springer International Publishing
Buch: Proceedings of EcoComfort 2020
Print ISBN: 978-3-030-57339-3

Electronic ISBN: 978-3-030-57340-9

Copyright-Jahr: 2021
DOI: https://doi.org/10.1007/978-3-030-57340-9_12

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Springer Professional "Wirtschaft"