Skip to main content
Erschienen in: Journal of Materials Science 4/2015

01.02.2015 | Original Paper

Creep behaviour of single hemp fibres. Part I: viscoelastic properties and their scattering under constant climate

verfasst von: Ousseynou Cisse, Vincent Placet, Violaine Guicheret-Retel, Frédérique Trivaudey, M. Lamine Boubakar

Erschienen in: Journal of Materials Science | Ausgabe 4/2015

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config
loading …

Abstract

The literature on the time-dependent behaviour of single bast fibres such as flax and hemp is extremely poor. The aim of this extensive study is to characterise the long-term behaviour of elementary hemp fibres and to establish suitable constitutive laws. Single hemp fibres are shown to exhibit both instantaneous strain and delayed, time-dependent strain when tensile loaded under constant climate. The creep behaviour appears to be a logarithmic function of time with a high strain rate during the primary creep and a lower and constant one during the secondary creep. A large scattering both in time-dependent properties and behaviour was observed on a batch of 25 single fibres. Three main creep behaviours were observed. Type II is truly linear as a function of the logarithm of time while Type I and Type III are strongly nonlinear and can be described, respectively, by concave and convex functions. A rheological model based on an anisotropic viscoelastic law and on a truncated inverse Gaussian spectrum of viscous mechanisms was shown to successfully describe all the experimentally observed behaviours.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Literatur
1.
Zurück zum Zitat Baley C (2002) Analysis of the flax fibres tensile behaviour and analysis of the tensile stiffness increase. Compos A Appl Sci Manuf 33(7):939CrossRef Baley C (2002) Analysis of the flax fibres tensile behaviour and analysis of the tensile stiffness increase. Compos A Appl Sci Manuf 33(7):939CrossRef
2.
Zurück zum Zitat FdA Silva, Chawla N, Filho RDdT (2008) Tensile behavior of high performance natural (sisal) fibers. Compos Sci Technol 68:3438CrossRef FdA Silva, Chawla N, Filho RDdT (2008) Tensile behavior of high performance natural (sisal) fibers. Compos Sci Technol 68:3438CrossRef
3.
Zurück zum Zitat Placet V (2009) Characterization of the thermo-mechanical behaviour of Hemp fibres intended for the manufacturing of high performance composites. Compos A Appl Sci Manuf 40(8):1111CrossRef Placet V (2009) Characterization of the thermo-mechanical behaviour of Hemp fibres intended for the manufacturing of high performance composites. Compos A Appl Sci Manuf 40(8):1111CrossRef
5.
Zurück zum Zitat Nilsson T, Gustafsson PJ (2007) Influence of dislocations and plasticity on the tensile behaviour of flax and hemp fibres. Compos A Appl Sci Manuf 38(7):1722CrossRef Nilsson T, Gustafsson PJ (2007) Influence of dislocations and plasticity on the tensile behaviour of flax and hemp fibres. Compos A Appl Sci Manuf 38(7):1722CrossRef
6.
Zurück zum Zitat Virk AS, Hall W, Summerscales J (2010) Failure strain as the key design criterion for fracture of natural fibre composites. Compos Sci Technol 70(6):995CrossRef Virk AS, Hall W, Summerscales J (2010) Failure strain as the key design criterion for fracture of natural fibre composites. Compos Sci Technol 70(6):995CrossRef
7.
Zurück zum Zitat Nilsson T (2006) Micromechanical modelling of natural fibres for composite materials. PhD thesis, Lund Nilsson T (2006) Micromechanical modelling of natural fibres for composite materials. PhD thesis, Lund
9.
Zurück zum Zitat Summerscales J, Dissanayake NPJ, Virk AS, Hall W (2010) A review of bast fibres and their composites. Part 1—fibres as reinforcements. Compos A Appl Sci Manuf 41(10):1329CrossRef Summerscales J, Dissanayake NPJ, Virk AS, Hall W (2010) A review of bast fibres and their composites. Part 1—fibres as reinforcements. Compos A Appl Sci Manuf 41(10):1329CrossRef
10.
Zurück zum Zitat Summerscales J, Dissanayake N, Virk A, Hall W (2010) A review of bast fibres and their composites. Part 2—composites. Compos A Appl Sci Manuf 41(10):1336CrossRef Summerscales J, Dissanayake N, Virk A, Hall W (2010) A review of bast fibres and their composites. Part 2—composites. Compos A Appl Sci Manuf 41(10):1336CrossRef
11.
Zurück zum Zitat Summerscales J, Virk A, Hall W (2013) A review of bast fibres and their composites: part 3—modelling. Compos A Appl Sci Manuf 44:132CrossRef Summerscales J, Virk A, Hall W (2013) A review of bast fibres and their composites: part 3—modelling. Compos A Appl Sci Manuf 44:132CrossRef
12.
Zurück zum Zitat Gassan J, Bledzki AK (1999) Influence of fiber surface treatment on the creep behavior of jute fiber-reinforced polypropylene. J Thermoplast Compos Mater 12(5):388CrossRef Gassan J, Bledzki AK (1999) Influence of fiber surface treatment on the creep behavior of jute fiber-reinforced polypropylene. J Thermoplast Compos Mater 12(5):388CrossRef
13.
Zurück zum Zitat Scott DW, Lai JS, Zureick AH (1995) Creep behavior of fiber-reinforced polymeric composites: a review of the technical literature. J Reinf Plast Compos 14(6):588 Scott DW, Lai JS, Zureick AH (1995) Creep behavior of fiber-reinforced polymeric composites: a review of the technical literature. J Reinf Plast Compos 14(6):588
14.
Zurück zum Zitat Takemura K (2004) Effect of water absorption on static and creep properties for jute fiber reinforced composite. WIT Transactions on the Built Environment/High Performance Structures and Materials II:7 Takemura K (2004) Effect of water absorption on static and creep properties for jute fiber reinforced composite. WIT Transactions on the Built Environment/High Performance Structures and Materials II:7
15.
Zurück zum Zitat Takemura K (2006) Effect of surface treatment to tensile static and creep properties for jute fiber reinforced composite. WIT Transactions on the Built Environment/High Performance Structures and Materials III: 7 Takemura K (2006) Effect of surface treatment to tensile static and creep properties for jute fiber reinforced composite. WIT Transactions on the Built Environment/High Performance Structures and Materials III: 7
16.
Zurück zum Zitat Takemura K, Miyamoto S, Katogi H (2013) Effect of surface treatment on creep property of jute fiber reinforced green composite under environmental temperature. Key Eng Mater 525:53 Takemura K, Miyamoto S, Katogi H (2013) Effect of surface treatment on creep property of jute fiber reinforced green composite under environmental temperature. Key Eng Mater 525:53
17.
Zurück zum Zitat Yu Y, Jiang Z, Fei B, Wang G, Wang H (2011) An improved microtensile technique for mechanical characterization of short plant fibers: a case study on bamboo fibers. J Mater Sci 46(3):739. doi:10.1007/s10853-010-4806-8 CrossRef Yu Y, Jiang Z, Fei B, Wang G, Wang H (2011) An improved microtensile technique for mechanical characterization of short plant fibers: a case study on bamboo fibers. J Mater Sci 46(3):739. doi:10.​1007/​s10853-010-4806-8 CrossRef
18.
Zurück zum Zitat Navi P, Stanzl-Tschegg S (2008) Micromechanics of creep and relaxation of wood. a review COST Action E35 2004–2008: wood machining–micromechanics and fracture. Holzforschung 63(2):186 Navi P, Stanzl-Tschegg S (2008) Micromechanics of creep and relaxation of wood. a review COST Action E35 2004–2008: wood machining–micromechanics and fracture. Holzforschung 63(2):186
19.
Zurück zum Zitat Holzer S, JR L, Dillard D (1989) A review of creep in wood : concepts relevant to develop long-term behavior predictions for wood structures. Wood Fiber Sci 21(4):376 Holzer S, JR L, Dillard D (1989) A review of creep in wood : concepts relevant to develop long-term behavior predictions for wood structures. Wood Fiber Sci 21(4):376
21.
Zurück zum Zitat Haslach H Jr (2000) The moisture and rate-dependent mechanical properties of paper: a review. Mech Time-Depend Mater 4(3):169CrossRef Haslach H Jr (2000) The moisture and rate-dependent mechanical properties of paper: a review. Mech Time-Depend Mater 4(3):169CrossRef
22.
Zurück zum Zitat Sedlachek K, Ellis R (1994) The effect of cyclic humidity on the creep of single fibers of Southern pine. In: Fellers C LT, ed. Moisture-induced creep behaviour of paper and board. Stockholm: STFI, USDA, 1994:22 Sedlachek K, Ellis R (1994) The effect of cyclic humidity on the creep of single fibers of Southern pine. In: Fellers C LT, ed. Moisture-induced creep behaviour of paper and board. Stockholm: STFI, USDA, 1994:22
23.
Zurück zum Zitat Sedlachek K (1995) The effect of hemicelluloses and cyclic humidity on the creep of single fibres. Georgia Tech, Inst Paper Sci Technol Sedlachek K (1995) The effect of hemicelluloses and cyclic humidity on the creep of single fibres. Georgia Tech, Inst Paper Sci Technol
24.
Zurück zum Zitat Coffin D, Boese S (1997) Tensile creep behavior of single fibers and paper in a cyclic humidity environment. 3rd Int. Symp. On Moisture and Creep effects on paper and containers. Rotorua, New-Zealand Coffin D, Boese S (1997) Tensile creep behavior of single fibers and paper in a cyclic humidity environment. 3rd Int. Symp. On Moisture and Creep effects on paper and containers. Rotorua, New-Zealand
25.
Zurück zum Zitat Haberger C, Coffin D, Hojjatie B (2001) Influence of humidity cycling parameters on the moisture-accelerated creep of polymeric fibers. J Polym Sci Pol Phys 39:2048CrossRef Haberger C, Coffin D, Hojjatie B (2001) Influence of humidity cycling parameters on the moisture-accelerated creep of polymeric fibers. J Polym Sci Pol Phys 39:2048CrossRef
26.
Zurück zum Zitat Olsson A-M, Salmén L, Eder M, Burgert I (2007) Mechano-sorptive creep in wood fibres. Wood Sci Technol 41(1):59CrossRef Olsson A-M, Salmén L, Eder M, Burgert I (2007) Mechano-sorptive creep in wood fibres. Wood Sci Technol 41(1):59CrossRef
27.
Zurück zum Zitat Dong F, Olsson A-M, Salmén L (2010) Fibre morphological effects on mechano-sorptive creep. Wood Sci Technol 44(3):475CrossRef Dong F, Olsson A-M, Salmén L (2010) Fibre morphological effects on mechano-sorptive creep. Wood Sci Technol 44(3):475CrossRef
28.
Zurück zum Zitat Placet V (2010) Tensile behaviour of natural fibres. Effect of loading rate, temperature and humidity on the “accommodation” phenomena. International Conference on Experimental Mechanics. Poitiers Placet V (2010) Tensile behaviour of natural fibres. Effect of loading rate, temperature and humidity on the “accommodation” phenomena. International Conference on Experimental Mechanics. Poitiers
29.
Zurück zum Zitat Virk A, Hall W, Summerscales J (2012) Modulus and strength prediction for natural fibre composites. Mater Sci Technol 28(7):864CrossRef Virk A, Hall W, Summerscales J (2012) Modulus and strength prediction for natural fibre composites. Mater Sci Technol 28(7):864CrossRef
30.
Zurück zum Zitat Bardet S (2001) Comportement thermoviscoélastique transverse du bois humide. PhD thesis, Montpellier II, France Bardet S (2001) Comportement thermoviscoélastique transverse du bois humide. PhD thesis, Montpellier II, France
31.
Zurück zum Zitat Boubakar ML, Vang L, Trivaudey F, Perreux D (2003) A meso-macro finite element modelling of laminate structures: part II: time-dependent behaviour. Compos Struct 60(3):275CrossRef Boubakar ML, Vang L, Trivaudey F, Perreux D (2003) A meso-macro finite element modelling of laminate structures: part II: time-dependent behaviour. Compos Struct 60(3):275CrossRef
32.
Zurück zum Zitat Trivaudey F, Placet V, Guicheret-Retel V, Boubakar L (2014) Nonlinear tensile behaviour of elementary hemp fibres. Part II: Modelling using an anisotropic viscoelastic constitutive law in a material rotating frame. Composites Part A, In Press Trivaudey F, Placet V, Guicheret-Retel V, Boubakar L (2014) Nonlinear tensile behaviour of elementary hemp fibres. Part II: Modelling using an anisotropic viscoelastic constitutive law in a material rotating frame. Composites Part A, In Press
33.
Zurück zum Zitat Carbillet S (2005) Contribution aux calculs fiabilistes sur des structures composites. PhD thesis, University Franche-Comté Carbillet S (2005) Contribution aux calculs fiabilistes sur des structures composites. PhD thesis, University Franche-Comté
34.
Zurück zum Zitat Richard F (1999) Identification du comportement et évaluation de la fiabilité des composites stratifiés. PhD thesis, University Franche-Comté Richard F (1999) Identification du comportement et évaluation de la fiabilité des composites stratifiés. PhD thesis, University Franche-Comté
35.
Zurück zum Zitat Carbillet S, Guicheret-Retel V, Trivaudey F, Richard F, Boubakar L (2014) Identification of highly non-linear behavior models with restricted or redundant data. Inf Sci (in press) Carbillet S, Guicheret-Retel V, Trivaudey F, Richard F, Boubakar L (2014) Identification of highly non-linear behavior models with restricted or redundant data. Inf Sci (in press)
36.
Zurück zum Zitat Placet V, Cisse O, Boubakar L (2014) Nonlinear tensile behaviour of elementary hemp fibres. Part I: investigation of the possible origins using repeated progressive loading with in situ microscopic observations. Compos A Appl Sci Manuf 56:319CrossRef Placet V, Cisse O, Boubakar L (2014) Nonlinear tensile behaviour of elementary hemp fibres. Part I: investigation of the possible origins using repeated progressive loading with in situ microscopic observations. Compos A Appl Sci Manuf 56:319CrossRef
37.
Zurück zum Zitat Keckes J, Burgert I, Fruhmann K et al (2003) Cell-wall recovery after irreversible deformation of wood. Nat Mater 2(12):810CrossRef Keckes J, Burgert I, Fruhmann K et al (2003) Cell-wall recovery after irreversible deformation of wood. Nat Mater 2(12):810CrossRef
38.
Zurück zum Zitat Duval A, Bourmaud A, Augier L, Baley C (2011) Influence of the sampling area of the stem on the mechanical properties of hemp fibers. Mater Lett 65(4):797CrossRef Duval A, Bourmaud A, Augier L, Baley C (2011) Influence of the sampling area of the stem on the mechanical properties of hemp fibers. Mater Lett 65(4):797CrossRef
39.
Zurück zum Zitat Marrot L, Lefeuvre A, Pontoire B, Bourmaud A, Baley C (2013) Analysis of the hemp fiber mechanical properties and their scattering (Fedora 17). Ind Crops Prod 51:317CrossRef Marrot L, Lefeuvre A, Pontoire B, Bourmaud A, Baley C (2013) Analysis of the hemp fiber mechanical properties and their scattering (Fedora 17). Ind Crops Prod 51:317CrossRef
40.
Zurück zum Zitat Beckermann GW, Pickering KL (2008) Engineering and evaluation of hemp fibre reinforced polypropylene composites: fibre treatment and matrix modification. Compos A Appl Sci Manuf 39(6):979CrossRef Beckermann GW, Pickering KL (2008) Engineering and evaluation of hemp fibre reinforced polypropylene composites: fibre treatment and matrix modification. Compos A Appl Sci Manuf 39(6):979CrossRef
41.
Zurück zum Zitat Placet V, Méteau J, Froehly L, Salut R, Boubakar ML (2014) Investigation of the internal structure of hemp fibres using optical coherence tomography and Focused Ion Beam transverse cutting. J Mater Sci 49(24):8317. doi: 10.1007/s10853-014-8540-5 CrossRef Placet V, Méteau J, Froehly L, Salut R, Boubakar ML (2014) Investigation of the internal structure of hemp fibres using optical coherence tomography and Focused Ion Beam transverse cutting. J Mater Sci 49(24):8317. doi: 10.​1007/​s10853-014-8540-5 CrossRef
42.
Zurück zum Zitat Bardet S, Gril J (2002) Modelling the transverse viscoelasticity of green wood using a combination of two parabolic elements. Comptes Rendus Mécanique 330(8):549CrossRef Bardet S, Gril J (2002) Modelling the transverse viscoelasticity of green wood using a combination of two parabolic elements. Comptes Rendus Mécanique 330(8):549CrossRef
Metadaten
Titel
Creep behaviour of single hemp fibres. Part I: viscoelastic properties and their scattering under constant climate
verfasst von
Ousseynou Cisse
Vincent Placet
Violaine Guicheret-Retel
Frédérique Trivaudey
M. Lamine Boubakar
Publikationsdatum
01.02.2015
Verlag
Springer US
Erschienen in
Journal of Materials Science / Ausgabe 4/2015
Print ISSN: 0022-2461
Elektronische ISSN: 1573-4803
DOI
https://doi.org/10.1007/s10853-014-8767-1

Weitere Artikel der Ausgabe 4/2015

Journal of Materials Science 4/2015 Zur Ausgabe

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.