nach oben

Erschienen in:

2019 | OriginalPaper | Buchkapitel

Development and Testing of Icephobic Materials: Lessons Learned from Fraunhofer IFAM

verfasst von : Nadine Rehfeld, Andrej Stake, Volkmar Stenzel

Erschienen in: Contamination Mitigating Polymeric Coatings for Extreme Environments

Verlag: Springer International Publishing

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The effective development of icephobic coatings requires test scenarios that simulate relevant icing conditions in the desired application field. Because of a lack of available standardized tests, developers rely on comparative tests, comparing results with pre-defined benchmark systems. In this context, tests need to be conducted under very stable conditions without allowance for fluctuation. This guarantees a development process with stepwise material improvement. Fraunhofer IFAM in Germany began working on icephobic materials over 10 years ago, seeking to develop not only the materials but also adequate test methods. This chapter describes the development process and results of these activities, as well as proposals to improve efficiency further in the future development of icephobic materials.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel Icephobicity: Definition and Measurement Regarding Atmospheric Icing

Nächstes Kapitel Ice Release Coatings of High Durability for Aerospace Applications

Anderson DN, Reich AD (1997) Tests of the performance of coatings for low ice adhesion. NASA technical memorandum. http://gltrs.grc.nasa.gov/reports/1997/TM-107399.pdf. Accessed 1 Nov 2016

Laforte C, Beisswenger A (2002) Icephobic material centrifuge adhesion test. Contribution to IWAIS. http://www.uqac.ca/amil/fr/documentation/articles/IW53-CAT.pdf. Accessed 1 Nov 2016

Yeong Y, Loth E, Sokhey J, Lambourne A (2015) Ice adhesion performance of superhydrophobic coatings in aerospace icing conditions. SAE technical paper 2015-01-2120. https://doi.org/10.4271/2015-01-2120

Schulz M, Sinapius M (2015) Evaluation of different ice adhesion tests for mechanical deicing systems. SAE technical paper 2015-01-2135. https://doi.org/10.4271/2015-01-2135

Kulinich SA, Farhadi S, Nose K, Du XW (2011) Superhydrophobic surfaces: are they really ice-repellent? Langmuir 27(1):25–29CrossRef

Chuppina SV (2007) Anti-icing gradient organosilicate coatings. Glas Phys Chem 33(5):502–509CrossRef

Hyugaji T, Kimura S, Endo H, Hasegawa M (2015) Runback water behavior on hydro-phobic/philic surfaces of circular cylinder placed in flow field. SAE technical paper 2015-01-2158. https://doi.org/10.4271/2015-01-2158

Dyer JM, Storey BD, Hoke JL, Jacobi AM, Georgiadis JG (2000) An experimental investigation of the effect of hydrophobicity on the rate of frost growth in laminar channel flows. ASHRAE Winter Meeting, Dallas. ISSN 0001-2505

Susoff M, Siegmann K, Pfaffenroth C, Hirayama M (2013) Evaluation of icephobic coatings – screening of different coatings and influence of roughness. Appl Surf Sci 282:870–879CrossRef

10.

Stenzel V, Rehfeld N (2011) Functional coatings. Vincentz, Hannover. ISBN 9783866308565

11.

Blackburn C, Laforte C, Laforte JL (2000) Apparatus for measuring the adhesion force of a thin ice sheet on a substrate. In: Ninth international workshop of atmospheric icing of structures, Chester UK, 5–8 June 2000

12.

Kraj AG, Bibeau EL (2010) Measurement method and results of ice adhesion force on the curved surface of a wind turbine. Renew Energy 35:741–746CrossRef

13.

Javan-Mashmool M, Volat C, Farzaneh M (2006) A new method for measuring ice adhesion strength at an ice-substrate interface. Hydrol Process 20:645–655CrossRef

14.

Laforte C, Blackburn C, Perron J (2015) A review of icephobic coating performances over the last decades. SAE technical paper 2015-01-2149. https://doi.org/10.4271/2015-01-2149

15.

Rehfeld N, Berton B, Morita K, Kimura S (2016) A way forward to design efficient wing ice protection systems. In: Proceedings of greener aviation conference, Brussels

16.

SAE Aerospace (2009) Aerospace recommended practice ARP 5905: calibration and acceptance of icing wind tunnels. Issued 2003-09, Reaffirmed 2009-12

17.

Rehfeld N, Berton B, Diaz F, Tanaka T, Morita K, Kimura S (2016) JediAce: Japanese-European de-icing aircraft collaborative exploration. In: Conference book aerodays 2015, London

18.

Berton B, Rehfeld N, Kimura S (2016) Evaluation of functional coatings to reduce contamination of aircraft leading edges. In: Proceedings of 2016 annual meeting of the adhesion society, San Antonio, 21–24 Feb 2016

19.

Meuler AJ, Smith JD, Varanasi KK, Mabry JM, McKinley GH, Cohen RE (2010) Relationships between water wettability and ice adhesion. ACS Appl Mater Interfaces 2(11):3100–3110CrossRef

20.

Kulinich SA, Farzaneh M (2009) Ice adhesion on super-hydrophobic surfaces. Appl Surf Sci 255:8153–8157CrossRef

21.

Zou M, Beckford S, Wei R, Ellis C, Hatton G, Miller MA (2011) Effects of surface roughness and energy on ice adhesion strength. Appl Surf Sci 257:3786–3792CrossRef

22.

Arianpoir F, Farzaneh M, Kulinich SA (2013) Hydrophobic and ice-retarding properties of doped silicone rubber coatings. Appl Surf Sci 265:546–552CrossRef

23.

Andersson LO, Golander CG, Persson S (1994) Ice adhesion to rubber surfaces. J Adhesion Sci Technol 8(2):117–132CrossRef

24.

Tobin EF, Young TM, Raps D (2012) Evaluation and correlation of inter-laboratory results from a rain erosion test campaign. Presented at the 28th international congress of the aeronautical science ICAS, Brisbane, 23–28 Sept 2012

Titel: Development and Testing of Icephobic Materials: Lessons Learned from Fraunhofer IFAM
verfasst von: Nadine Rehfeld
Andrej Stake
Volkmar Stenzel
Verlag: Springer International Publishing
Buch: Contamination Mitigating Polymeric Coatings for Extreme Environments
Print ISBN: 978-3-030-45838-6

Electronic ISBN: 978-3-030-45839-3

Copyright-Jahr: 2019
DOI: https://doi.org/10.1007/12_2017_37

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht