nach oben

Metallurgist

Erschienen in:

02.03.2023

Development of Contact Surface During Sintering of Powder Steels

verfasst von: M. S. Egorov, R. V. Egorova, B. Ch. Meskhi, S. N. Egorov

Erschienen in: Metallurgist | Ausgabe 9-10/2023

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Sintered parts obtained using traditional and new raw materials are widely used in the industry. The latter include partially alloyed powders. Sintering is one of the most important and complex technological operations in alloy production. The product properties depend on the correct choice of the sintering parameters. The paper discusses the growth patterns of the contact surface during sintering of powder steels, and also defines the criteria for the development of high-quality bonding depending on the sintering process conditions.

Vorheriger Artikel Evaluation of Tribotechnical Characteristics of Experimental Hard Alloy WC+(Co–Fe–Cu) During Friction Without Lubrication Against Stainless Steel

Nächster Artikel Design of a Dry Slag Granulation Plant for Blast Furnace No. 5 of Severstal

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

E. Robert-Perron, C. Blais, S. Pelletier, “Tensile properties of sinter hardened powder metallurgy components machined in their green state,” Powder Metallurgy, 52, 1, 80–83 (2009).CrossRef

Problems of Modern Materials and Technologies [in Russian], ed. by V. N. Antsiferova, Perm. Gos. Tekh. UNiv., Perm’ (1995).

Yu. G. Gurevich, V. N. Antsiferov, L. M. Savinykh, S. A. Oglezneva, and V. Ya. Bulanov, Wear-resistant Composite Materials [in Russian], UrO RAN, Yekaterinburg (2005).

R. Gilardi et al., “Reactivity of carbon based materials for powder metallurgy parts and hard metal powders manufacturing,” J. Jpn. Society of Powder and Powder Metallurgy, 63, 7, 548–554 (2016); https://doi.org/10.2497/jjspm.63.548/.

E. Hryha, L. Nyborg, and L. Alzati, “Effect of carbon source on oxide reduction in Cr-prealloyed PM steels,” Proc. of the 2012 Powder Metallurgy World Congress & Exhibition, Yokohama, 2013, Japan Society of Powder and Powder Metallurgy, 16A-T9-11 (2013); [Electronic resource].

J. Rojek, S. Nosewicz, M. Mazdziarz, P. Kowalczyk, K. Wawrzyk, and D. Lumelskyj, “Modeling of a sintering process at various scales,” Procedia Engineering, 177, 263–270 (2017).CrossRef

A. G. Kostornov and L. G. Galstyan, “Contact phenomena in porous fiber materials,” Poroshkovaya Metallurgiya, No. 5, 34–40 (1983).

V. Yu. Dorofeev and S. N. Egorov, Interparticle Bonding during the Formation of Powder Hot-Deformed Materials [in Russian], Metallurgizdat, Moscow (2003).

S. N. Egorov, T. N. Kichik, and V. A. Giidenko, “Contact and free surfaces of a porous body as functions of porosity,” in: Powder and Composite Materials. Structure, Properties, Technology, Sb. Nauchn. Trudov Yuzh.-Ros. Gis. Tekh. Univ. Novocherkassk: YURGTU (2001), pp. 22–26.

10.

M. B. Shtern and Ye. V. Kartuzov, “Specifics of the occurrence and propagation of shock waves in highly porous materials,” Poroshkovaya Metallurgiya, No. 3, 13–22 (2016).

11.

Zh. V. Yeremeeva, N. M. Nikitin, N. P. Korobov, and Yu. S. Ter-Vaganyants, “Study of the processes of heat treatment of powder steels doped with nanoscale additives,” Nanotekhnologii: Nauka i Proizvodstvo, No. 1(38), 63–74 (2016).

12.

S. N. Egorov and M. S. Egorov, Hot-Deformed Powder Low-Alloy Steels [in Russian], Novocherkassk (2008).

13.

R. V. Egorova, “Microstructural analysis of a stepped surface,” Metallurg, No. 6, 65–67 (2009).

14.

A. K. Grigoriev and A. I. Rudskoi, Deformation and Compaction of Powder Materials [in Russian], Metallurgiya, Moscow (2002).

15.

A. A. Glotka and A. N. Moroz, “Comparative effect of carbides and non-metallic inclusions on the formation of fatigue microcracks in steels,” MiTOM, No. 8, 61–65 (2019).

Titel: Development of Contact Surface During Sintering of Powder Steels
verfasst von: M. S. Egorov
R. V. Egorova
B. Ch. Meskhi
S. N. Egorov
Publikationsdatum: 02.03.2023
Verlag: Springer US
Erschienen in: Metallurgist / Ausgabe 9-10/2023
Print ISSN: 0026-0894
Elektronische ISSN: 1573-8892
DOI: https://doi.org/10.1007/s11015-023-01440-4

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 9-10/2023

Thermal Design of CCM Mold with Slotted Water Cooling Channels

Research for Replacement of Gray Cast Irons for Manufacturing Electrolyzer Gas Collection Bell Cast Components

Aspects of the Production Technology of Largesized Clad Plates and Large Diameter Pipes Made From Them

Metallurgist Volume 66, Number 9

Development of a Combined Technology for Producing Base Gold Alloy from Waste of Different Types

Quantitative Structural-Phase Analysis of Changes in Steel after Quenching in Magnetic Field

Premium Partner

Marktübersichten