nach oben

Erschienen in:

2014 | OriginalPaper | Buchkapitel

Drilling of Glass Fiber-Reinforced Epoxy Laminates with Natural Fillers: Thrust Force Analysis

verfasst von : Vikas Dhawan, Kishore Debnath, Inderdeep Singh, Sehijpal Singh

Erschienen in: Proceedings of the International Conference on Research and Innovations in Mechanical Engineering

Verlag: Springer India

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

An investigation has been carried out to study the effect of spindle speed and feed rate on thrust force generated in drilling glass fiber-reinforced plastics with natural fillers. An effort has been made to use abundantly available natural fibers, namely coconut coir, rice husk, and wheat husk as fillers along with synthetic glass fibers. The drilling experiments have been extensively conducted at six different levels of feed rate and spindle speed using carbide twist drills of 4 mm. Predictive model has been developed using Levenberg–Marquardt algorithm to predict the thrust force with material, spindle speed, and feed rate being the input parameters and thrust force being the output parameter. The results of the predictive model are in close agreement with the actual values. Coefficient of correlation between predicted and experimental values for training and testing data sets is 0.995 and 0.9849, respectively. The mean percentage error in training and testing is found to be 3.175 % and 5.31 %.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel Experimental Testing and Evaluation of a Prototype Magnetorheological Damper

Nächstes Kapitel Assessment of Strength Evaluation and Structure Stability of Building Destroyed in Fire by Using Techniques of Non-destructive Testing

Athijayamani A, Natarajan U, Thiruchitrambalam M (2010) Prediction and comparison of thrust force and torque in drilling of natural fibre hybrid composite using regression and artificial neural network modeling. Int J Mach Mach Mater 8(1/2):131–145

Chen WC (1997) Some experimental investigations in the drilling of s carbon fibre-reinforced plastic (CFRP) composite laminates. Int J Mach Tools Manufact 37(8):1097–1108CrossRef

Dharan CKH, Won MS (2000) Machining parameters for an intelligent machining system for composite laminates. Int J Mach Tools Manuf 40:415–426CrossRef

Durao LMP, Magalhaes AG, Marques AT, Baptista AM, Figueiredo M (2008a) Drilling of fibre reinforced plastic laminates. Mater Sci Forum 587–588:706–710CrossRef

Durao LMP, Magalhaes AG, Tavares JMRS, Marques AT (2008b) Analyzing objects in images for estimating the delamination influence on load carrying capacity of composite laminates. Electron Lett Comput Vis Image Anal 7(2):11–21

Fernandesa M, Cook C (2006) Drilling of carbon composites using a one shot drill bit. Part I: FIVE stage representation of drilling and factors affecting maximum force and torque. Int J Mach Tools Manuf 46:70–75CrossRef

Ho-Cheng H, Dharan CKH (1990) Delamination during drilling in composite laminates. J Eng Ind 112:236–239CrossRef

Hocheng H, Tsao CC (2003) Comprehensive analysis of delamination in drilling of composite materials with various drill bits. J Mater Process Technol 140(1–3):335–339CrossRef

Jain S, Yang DCH (1993) Effects of feed rate and chisel edge on delamination in composite drilling. Trans ASME J Eng Ind 115:398–405CrossRef

Jain S, Yang DCH (1994) Delamination-free drilling of composite laminates. J Eng Ind 116:475–481CrossRef

Karnik SR, Gaitonde VN, Rubio JC, Correia AE, Abrao AM, Davim JP (2008) Delamination analysis in high speed drilling of carbon fibre reinforced plastics (CFRP) using artificial neural network model. Mater Des 29:1768–1776CrossRef

Khashaba UA (2004) Delamination in drilling GFR-thermoset composites. Compos Struct 63:313–327CrossRef

Khashaba UA, Seif MA, Elhamid MA (2007) Drilling analysis of chopped composites. Composites: Part A 38:61–70CrossRef

Lachaud F, Piquet R, Collombet F, Surcin L (2001) Drilling of composite structures. Compos Struct 52:511–516CrossRef

Langella A, Nele L, Maio A (2005) A torque and thrust prediction model for drilling of composite materials. Composites: Part A 36:83–93CrossRef

Latha B, Senthilkumar VS (2010) Application of artificial intelligence for the prediction of delamination in drilling GFRP composites. Int J Precis Technol 1(3/4):314–330CrossRef

Mathew J, Ramakrishnan N, Naik NK (1999a) Investigations into the effect of geometry of trepanning tool on thrust and torque during drilling of GFRP composites. J Mater Process Technol 91(1–3):1–11CrossRef

Mathew J, Ramakrishnan N, Naik NK (1999b) Trepanning on uni-directional composites. Compos Part A Appl Sci Manuf 30(8):951–959CrossRef

Mishra R, Malik J, Singh I (2010) Prediction of drilling-induced damage in unidirectional glass-fibre-reinforced plastic laminates using an artificial neural network. Proc Inst Mech Eng Part B J Eng Manuf 224(5):733–738CrossRef

RangaSuri NNR, Deodhare D, Nagabhushan P (2002) Parallel Levenberg–Marquardt-based neural network training on Linux clusters—a case study. In: Linux clusters, ICVGIP 2002, 3rd Indian conference on computer vision, graphics and image processing, Ahmadabad

Stone R, Krishnamurthy K (1996) A neural network thrust force controller to minimize delamination during drilling of graphite-epoxy laminates. Int J Mach Tools Manure 36(9):985–1003CrossRef

Tsao CC (2008a) Thrust force and delamination of core-saw drill during drilling of carbon fibre reinforced plastics (CFRP). The Int J Adv Manuf Technol 37(1–2):23–28CrossRef

Tsao CC (2008b) Comparison between response surface methodology and radial basis function network for core-center drill in drilling composite materials. Int J Adv Manuf Technol 37:1061–1068CrossRef

Tsao CC, Hocheng H (2005) Effects of exit back-up on delamination in drilling composite materials using a saw drill and a core drill. Int J Mach Tools Manuf 45(11):1261–1270CrossRef

Tsao CC, Hocheng H (2008a) Analysis of delamination in drilling composite materials by core-saw drill. Int J Mater Prod Technol 32(2/3):188–201CrossRef

Tsao CC, Hocheng H (2008b) Evaluation of thrust force and surface roughness in drilling composite material using Taguchi analysis and neural network. J Mater Process Technol 203:342–348CrossRef

Yu H, Wilamowski BM (2011) Levenberg–Marquardt training, industrial electronics handbook, vol 5—Intelligent systems, 2nd edn. CRC Press, Taylor & Francis Group, Boca Raton, pp 12-1–12-16 (Chapter 12)

Zhang LB, Wang LJ, Liu XY (2001) A mechanical model for predicting critical thrust forces in drilling composite laminates. Proc Inst Mech Eng Part B J Eng Manuf 215(2):135–146CrossRef

Titel: Drilling of Glass Fiber-Reinforced Epoxy Laminates with Natural Fillers: Thrust Force Analysis
verfasst von: Vikas Dhawan
Kishore Debnath
Inderdeep Singh
Sehijpal Singh
Verlag: Springer India
Buch: Proceedings of the International Conference on Research and Innovations in Mechanical Engineering
Print ISBN: 978-81-322-1858-6

Electronic ISBN: 978-81-322-1859-3

Copyright-Jahr: 2014
DOI: https://doi.org/10.1007/978-81-322-1859-3_10

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht