nach oben

Erschienen in:

2021 | OriginalPaper | Buchkapitel

Effect of Nano and Microfillers in Basalt/Epoxy Composites

verfasst von : M. M. Metro, M. Selvaraj

Erschienen in: Trends in Manufacturing and Engineering Management

Verlag: Springer Singapore

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

There is a growing demand emerging from industries towards usage of composite materials. Remarkable properties of basalt fibre reinforced polymer composites are being tailored for its application in various fields. Effect of epoxy/basalt fibre with nano and microparticles as filler has been studied in this work. Owing to easier manufacturing process, low cost and exceptional properties, basalt fibre finds its wider usage. Nano graphene platelets are added as filler to epoxy resin to enhance physical and mechanical properties of matrix. Synergistic effect of zinc borate with alumina trihydrate has also made them to incorporate with the resin as a flame retardant. Influence of nano titanium dioxide with graphene platelet nanopowder as reinforcement in basalt fibre-epoxy composite was also determined by appropriate tests. Mechanical properties such as tensile and flexure strength were investigated in accordance with ASTM standards. SEM image of failure pattern is also studied.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel Development and Analysis of GFRP Conical Springs

Nächstes Kapitel A Feasibility Study on Microwave Joining of GFRP Composite Pipes with Interlayer Coupling Agents

Dhand V, Mittal G, Rhee KY (2015) A short review on basalt fiber reinforced polymer composites. Compos Part B Eng 73:166–180. https://doi.org/10.1016/j.compositesb.2014.12.011

Espano (2013) Investigation of the effect of different silane coupling agents on mechanical performance of basalt fiber composite laminates with biobased epoxy matrices. Polym Compos 34

Dasari BL, Morshed M, Nouri JM (2018) Mechanical properties of graphene oxide reinforced aluminium matrix composites, pp 136–144

Muhammad R, Fusheng P, Aitao T (2014) Effect of graphene nanoplatelets addition on mechanical properties of pure aluminum using a semi-powder method, pp 101–108

Park JH, Jana SC (2003) The relationship between nano- and micro-structures and mechanical properties in PMMA-epoxy-nanoclay composites. Polymer (Guildf) 44:2091–2100. https://doi.org/10.1016/S0032-3861(03)00075-2CrossRef

Koricho EG, Khomenko A, Haq M (2015) Effect of hybrid (micro- and nano-) fillers on impact response of GFRP composite. Compos Struct 134:789–798. https://doi.org/10.1016/j.compstruct.2015.08.106CrossRef

Sengupta R, Bhattacharya M, Bandyopadhyay S, Bhowmick AK (2011) A review on the mechanical and electrical properties of graphite and modified graphite reinforced polymer composites. Prog Polym Sci 36:638–670. https://doi.org/10.1016/j.progpolymsci.2010.11.003CrossRef

Weihua K, Yuuki H, Lei Hua YI (2008) Thermal and mechanical properties of a poly(« -caprolactone)/graphite oxide composite. J Appl Polym Sci 107:1395–1400CrossRef

Huang G, Gao J, Wang X (2012) How can graphene reduce the flammability of polymer nanocomposites? Mater Lett 66:187–189. https://doi.org/10.1016/j.matlet.2011.08.063CrossRef

10.

Papageorgiou DG, Kinloch IA, Young RJ (2017) Mechanical properties of graphene and graphene-based nanocomposites. Prog Mater Sci 90:75–127. https://doi.org/10.1016/j.pmatsci.2017.07.004CrossRef

11.

Lee JH, Rhee KY, Park SJ (2010) The tensile and thermal properties of modified CNT-reinforced basalt/epoxy composites. Mater Sci Eng, A 527:6838–6843. https://doi.org/10.1016/j.msea.2010.07.080CrossRef

12.

Liang M, Wong KL (2017) Study of mechanical and thermal performances of epoxy resin filled with micro particles and nanoparticles. Energy Procedia 110:156–161 https://doi.org/10.1016/j.egypro.2017.03.121

13.

Kim MT, Rhee KY, Park SJ, Hui D (2012) Effects of silane-modified carbon nanotubes on flexural and fracture behaviors of carbon nanotube-modified epoxy/basalt composites. Compos Part B 43:2298–2302. https://doi.org/10.1016/j.compositesb.2011.12.007CrossRef

14.

Lynch TJ, Chen T, Riley D (2003) Advances in ATH benefit Aluminium hydroxide is a widely used flame retardant for reinforced plastics. Materials E, 44–46

15.

Elbasuney S (2017) Novel multi-component flame retardant system based on nanoscopic. Powder Technol 305:538–545. https://doi.org/10.1016/j.powtec.2016.10.038CrossRef

16.

Schubert DM, Alam F, Visi MZ, Knobler CB (2003) Structural characterization and chemistry of the industrially important zinc borate, Zn [B₃O₄(OH)₃]. Chem Mater 4:866–871

17.

Bourbigot S, le Bras M (2003) European meeting on fire retardancy and protection OF Materials, pp 327–335

18.

Chen R, Gong J, Jiang Y (2018) Halogen-free flame retarded cold-mix epoxy asphalt binders: rheological, thermal and mechanical characterization. Constr Build Mater 186:863–870. https://doi.org/10.1016/j.conbuildmat.2018.08.018CrossRef

19.

Tanwyn M, Khushairi M, Sharif S (2015) Evaluation of mechanical properties of filled epoxy composite for improving mould performance—a review. Appl Mech Mater 735:13–18. https://doi.org/10.4028/www.scientific.net/AMM.735.13

20.

Bhagyashekar MS (2014) J Reinf Plast Compos, 28–42. https://doi.org/10.1177/0731684408095034

21.

Chung S, Im Y, Kim H, Jeong H (2005) Evaluation for micro scale structures fabricated using epoxy-aluminum particle composite and its application

22.

Tilbrook MT, Moon RJ, Hoffman M (2005) Study on the mechanical properties of alumina—epoxy composites with an interpenetrating network structure. Mater Sci Eng A 393:170–178. https://doi.org/10.1016/j.msea.2004.10.004

23.

Ma L, Zhu Y, Li X (2018) The architecture of carbon fiber-TiO₂ nanorods hybrid structure in supercritical water for reinforcing interfacial and impact properties of CF/epoxy composites. Polym Test 66:213–220. https://doi.org/10.1016/j.polymertesting.2018.01.021CrossRef

24.

Yi C, Bagchi S, Dmuchowski CM (2018) Direct nanomechanical characterization of carbon nanotube—Titanium interfaces. Carbon N Y. https://doi.org/10.1016/j.carbon.2018.02.069CrossRef

25.

Lipatov YV, Gutnikov SI, Manylov MS (2015) High alkali-resistant basalt fiber for reinforcing concrete. J Mater 73:60–66. https://doi.org/10.1016/j.matdes.2015.02.022CrossRef

26.

Bulut M (2017) Mechanical characterization of Basalt/epoxy composite laminates containing graphene nanopellets. Compos Part B 122:71–78. https://doi.org/10.1016/j.compositesb.2017.04.013CrossRef

27.

Silva F, Njuguna J, Sachse S (2013) The influence of multiscale fillers reinforcement into impact resistance and energy absorption properties of polyamide 6 and polypropylene nanocomposite structures. Mater Des 50:244–252. https://doi.org/10.1016/j.matdes.2013.02.041CrossRef

28.

Prasad V, Joseph MA, Sekar K (2018) Investigation of mechanical, thermal and water absorption properties of flax fibre reinforced epoxy composite with nano TiO₂ addition. Compos Part A 115:360–370. https://doi.org/10.1016/j.compositesa.2018.09.031

29.

Mahesha CR, Mohan N, Rajesh M (2017) Role of nanofillers on mechanical and dry sliding wear behavior of basalt-epoxy nanocomposites. Mater Today Proc 4:8192–8199. https://doi.org/10.1016/j.matpr.2017.07.161

30.

Thotsaphon T, Katsuyoshi K, Hisashi I (2019) Titanium matrix composite reinforced with in-situ formed TiC using carbon black nano particles via a wet process. Trans JWRI 38:13–17

Titel: Effect of Nano and Microfillers in Basalt/Epoxy Composites
verfasst von: M. M. Metro
M. Selvaraj
Verlag: Springer Singapore
Buch: Trends in Manufacturing and Engineering Management
Print ISBN: 978-981-15-4744-7

Electronic ISBN: 978-981-15-4745-4

Copyright-Jahr: 2021
DOI: https://doi.org/10.1007/978-981-15-4745-4_37

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht