nach oben

Journal of Coatings Technology and Research

Erschienen in:

01.07.2022

Effect of plasma treatment on the tribological and adhesion performance of a polymer coating deposited on different metallic substrates

verfasst von: Ahmed F. Abdelaal, M. Abdul Samad, Akeem Yusuf Adesina, M. M. A. Baig

Erschienen in: Journal of Coatings Technology and Research | Ausgabe 6/2022

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Plasma treatment is a technique accepted universally for improving the adhesion of coatings to substrates because of its ease of use, environmental friendliness, and its adaptability. Hence, this research aims to further explore this technique and specifically investigate the effect of air–plasma treatment of different substrates (stainless steel, copper, brass, titanium, and aluminum) on the adhesion and tribological properties of an ultra-high molecular weight polyethylene polymer coating deposited on them. Several characterization techniques such as X-ray photoelectron spectroscopy, water contact angle, and roughness measurements are conducted to evaluate the surfaces before and after air–plasma treatment. Results showed that UHMWPE coating deposited on the plasma-treated stainless steel substrates demonstrated the best adhesion and tribological properties. This was attributed to the improved oxidation effect and the carbon cleaning effect of the plasma treatment on the stainless steel substrates as compared to other substrates.

Vorheriger Artikel High silica-alumina-coated TiO2 pigment with improved dry hiding for flat paints

Nächster Artikel Photocured polyacrylate coatings modified by polybutadiene derivatives with multiunsaturated reactive bonds

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Basavaraj, E, Ramaraj, B, Lee, JH, Siddaramaiah, "Polyamide 6/Carbon Black/Molybdenum Disulphide Composites: Friction, Wear and Morphological Characteristics.” Mater. Chem. Phys., 138 658–665. https://doi.org/10.1016/j.matchemphys.2012.12.035 (2013)CrossRef

Abdul Samad, M, Satyanarayana, N, Sinha, SK, “Effect of Air-Plasma Pre-treatment of Si Substrate on Adhesion Strength and Tribological Properties of a UHMWPE Film.” J. Adhes. Sci. Technol., 24 2557–2570 (2010). https://doi.org/10.1163/016942410X508181.

Harris, AF, Beevers, A, “Effects of Grit-Blasting on Surface Properties for Adhesion.” Int. J. Adhes. Adhesive., 19 445–452. https://doi.org/10.1016/S0143-7496(98)00061-X (1999)CrossRef

Žigon, J, Kovač, J, Zaplotnik, R, Saražin, J, Šernek, M, Petrič, M, Dahle, S, “Enhancement of Strength of Adhesive Bond Between Wood and Metal Using Atmospheric Plasma Treatment.” Cellulose, 27 6411–6424. https://doi.org/10.1007/s10570-020-03212-8 (2020)CrossRef

Han, MH, Jegal, JP, Park, KW, Choi, JH, Baik, HK, Noh, JH, Song, KM, Lim, YS, “Surface Modification for Adhesion Enhancement of PET-Laminated Steel Using Atmospheric Pressure Plasma.” Surf. Coat. Technol., 201 4948–4952. https://doi.org/10.1016/j.surfcoat.2006.07.156 (2007)CrossRef

Kumar, V, Sinha, SK, Agarwal, AK, “Tribological Studies of Dual-Coating (Intermediate Hard with Top Epoxy-Graphene-Base Oil Composite Layers) on Tool Steel in Dry and Lubricated Conditions.” Tribolol. Int., 127 10–23. https://doi.org/10.1016/j.triboint.2018.05.011 (2018)CrossRef

Aliyu, IK, Samad, MA, Al-Qutub, A, “Tribological Characterization of a Bearing Coated with UHMWPE/GNPs Nanocomposite Coating.” Surf. Eng., 37 60–69. https://doi.org/10.1080/02670844.2020.1754624 (2021)CrossRef

Aliyu, IK, Madhan Kumar, A, Mohammed, AS, “Wear and Corrosion Resistance Performance of UHMWPE/GNPs Nanocomposite Coatings on AA2028 Al Alloys.” Prog. Org. Coat., 151 106072 (2021). https://doi.org/10.1016/j.porgcoat.2020.106072.

Satheesan, B, Mohammed, AS, “Tribological Characterization of Epoxy Hybrid Nanocomposite Coatings Reinforced with Graphene Oxide and Titania.” Wear, 466–467 203560. https://doi.org/10.1016/j.wear.2020.203560 (2021)CrossRef

10.

Wang, L, Zhang, B, Li, X, Wang, W, Tian, M, Fan, Z, Zhang, L, “Enhanced Adhesion Property of Aramid Fibers by Polyphenol-Metal Iron Complexation and Silane Grafting.” J. Adhes., 97 346–360. https://doi.org/10.1080/00218464.2019.1666368 (2021)CrossRef

11.

Tang, S, Kwon, OJ, Lu, N, Choi, HS, “Surface Characteristics of AISI 304L Stainless Steel After an Atmospheric Pressure Plasma Treatment.” Surf. Coat. Technol., 195 298–306. https://doi.org/10.1016/j.surfcoat.2004.07.071 (2005)CrossRef

12.

Loh, JH, “Plasma Surface Modification in Biomedical Applications.” Med. Dev. Technol., 10 24–30. https://doi.org/10.1557/proc-414-43 (1999)CrossRef

13.

Tang, S, Lu, N, Myung, SW, Choi, HS, “Enhancement of Adhesion Strength Between Two AISI 316 L Stainless Steel Plates Through Atmospheric Pressure Plasma Treatment.” Surf. Coat. Technol., 200 5220–5228. https://doi.org/10.1016/j.surfcoat.2005.06.020 (2006)CrossRef

14.

Misra, NN, Tiwari, BK, Raghavarao, KSMS, Cullen, PJ, “Nonthermal Plasma Inactivation of Food-Borne Pathogens.” Food Eng. Rev., 3 159–170. https://doi.org/10.1007/s12393-011-9041-9 (2011)CrossRef

15.

Liu, X, Tang, S, Choi, HK, Choi, HS, “Effect of Plasma-Treated Polymer Substrates on Fabricating Surface Microsystems Through LbL Coating.” Macromol. Res., 18 413–420. https://doi.org/10.1007/s13233-010-0506-0 (2010)CrossRef

16.

Gururaj, T, Subasri, R, Raju, KRCS, Padmanabham, G, “Effect of Plasma Pretreatment on Adhesion and Mechanical Properties of UV-Curable Coatings on Plastics.” Appl. Surf. Sci., 257 4360–4364. https://doi.org/10.1016/j.apsusc.2010.12.060 (2011)CrossRef

17.

Mounder Kouicem, M, Tomasella, E, Bousquet, A, Batisse, N, Monier, G, Robert-Goumet, C, Dubost, L, “An Investigation of Adhesion Mechanisms Between Plasma-Treated PMMA Support and Aluminum Thin Films Deposited by PVD.” Appl. Surf. Sci., 564 150322 (2021). https://doi.org/10.1016/j.apsusc.2021.150322.

18.

Shepa, I, Mudra, E, Pavlinak, D, Antal, V, Bednarcik, J, Mikovic, O, Kovalcikova, A, Dusza, J, “Surface Plasma Treatment of the Electrospun TiO₂/PVP Composite Fibers in Different Atmospheres.” Appl. Surf. Sci., 523 146381. https://doi.org/10.1016/j.apsusc.2020.146381 (2020)CrossRef

19.

Ghoreishian, SM, Badii, K, Norouzi, M, Malek, K, “Effect of Cold Plasma Pre-Treatment on Photocatalytic Activity of 3D Fabric Loaded with Nano-Photocatalysts: Response Surface Methodology.” Appl. Surf. Sci., 365 252–262. https://doi.org/10.1016/j.apsusc.2015.12.155 (2016)CrossRef

20.

Kyzioł, K, Rajczyk, J, Wolski, K, Kyzioł, A, Handke, B, Kaczmarek, Ł, Grzesik, Z, “Dual-Purpose Surface Functionalization of Ti-6Al-7Nb Involving Oxygen Plasma Treatment and Si-DLC or Chitosan-Based Coatings.” Mater. Sci. Eng. C., 121 111848. https://doi.org/10.1016/j.msec.2020.111848 (2021)CrossRef

21.

Rauscher, H, Perucca, M, Buyle, G, “Plasma Technology for Hyperfunctional Surfaces.” Wiley. https://doi.org/10.1002/9783527630455 (2010)CrossRef

22.

D’Angelo, D, “Plasma-Surface Interaction.” In: Plasma Technology for Hyperfunctional Surfaces, pp. 63–77. Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim (2010). https://doi.org/10.1002/9783527630455.ch3

23.

Siow, KS, Britcher, L, Kumar, S, Griesser, HJ, “Plasma Methods for the Generation of Chemically Reactive Surfaces for Biomolecule Immobilization and Cell Colonization-A Review.” Plasma Process. Polym., 3 392–418. https://doi.org/10.1002/ppap.200600021 (2006)CrossRef

24.

Buyle, G, Schneider, J, Walker, M, Akishev, Y, Napartovich, A, Perucca, M, “Plasma Systems for Surface Treatment.” In: Plasma Technology for Hyperfunctional Surfaces: Food, Biomedical, and Textile Applications, pp. 33–61. Wiley-VCH, (2010). https://doi.org/10.1002/9783527630455.ch2

25.

Azam, MU, Samad, MA, “A Novel Organoclay Reinforced UHMWPE Nanocomposite Coating for Tribological Applications.” Prog. Org. Coat., 118 97–107. https://doi.org/10.1016/j.porgcoat.2018.01.028 (2018)CrossRef

26.

Azam, MU, Samad, MA, “Tribological Evaluation of a UHMWPE Hybrid Nanocomposite Coating Reinforced With Nanoclay and Carbon Nanotubes Under Dry Conditions.” J. Tribol., 140 051304. https://doi.org/10.1115/1.4039956 (2018)CrossRef

27.

Azam, MU, Samad, MA, “UHMWPE Hybrid Nanocomposite Coating Reinforced with Nanoclay and Carbon Nanotubes for Tribological Applications Under Water With/Without Abrasives.” Tribol. Int., 124 145–155. https://doi.org/10.1016/j.triboint.2018.04.003 (2018)CrossRef

28.

Mohammed, A, “UHMWPE Nanocomposite Coatings Reinforced with Alumina (Al₂O₃) Nanoparticles for Tribological Applications.” Coatings, 8 280. https://doi.org/10.3390/coatings8080280 (2018)CrossRef

29.

Campbell, T, Kalia, RK, Nakano, A, Vashishta, P, Ogata, S, Rodgers, S, “Dynamics of Oxidation of Aluminum Nanoclusters Using Variable Charge Molecular-Dynamics Simulations on Parallel Computers.” Phys. Rev. Lett., 82 4866–4869. https://doi.org/10.1103/PhysRevLett.82.4866 (1999)CrossRef

30.

Przemeck, K, Zum Gahr, KH, “Microstructure and Tribological Properties of Alumina Ceramic with Laser-Dispersed Tungsten Additions.” J. Mater. Sci.. 33 4531–4541 (1998). https://doi.org/10.1023/A:1004456419252

31.

Rider, AN, Lamb, RN, Koch, MH, “Low-Power R.F. Plasma Oxidation of Aluminium.” Surf. Interface Anal.. 31 302–312 (2001). https://doi.org/10.1002/sia.978.

32.

Lu, FH, Tsai, HD, Chieh, YC, “Plasma Oxidation of Al Thin Films on Si Substrates.” Thin Solid Film., 516 1871–1876. https://doi.org/10.1016/j.tsf.2007.09.049 (2008)CrossRef

33.

Minzari, D, Møller, P, Kingshott, P, Christensen, LH, Ambat, R, “Surface Oxide Formation During Corona Discharge Treatment of AA 1050 Aluminium Surfaces.” Corros. Sci., 50 1321–1330. https://doi.org/10.1016/j.corsci.2008.01.023 (2008)CrossRef

34.

Yerokhin, AL, Nie, X, Leyland, A, Matthews, A, “Characterisation of Oxide Films Pproduced by Plasma Electrolytic Oxidation of a Ti-6Al-4V Alloy.” Surf. Coat. Technol., 130 195–206. https://doi.org/10.1016/S0257-8972(00)00719-2 (2000)CrossRef

35.

Çelik, I, Alsaran, A, Purcek, G, “Effect of Different Surface Oxidation Treatments on Structural, Mechanical and Tribological Properties of Ultrafine-Grained Titanium.” Surf. Coat. Technol., 258 842–848. https://doi.org/10.1016/j.surfcoat.2014.07.073 (2014)CrossRef

36.

Cui, CQ, Tay, HL, Chai, TC, Ggopalakrishan, R, Lim, TB, “Surface Treatment of Copper for the Adhesion Improvement to Epoxy Mold Compounds.” In: Proceedings-Electronic Components and Technology Conference, pp. 1162–1166. Institute of Electrical and Electronics Engineers Inc. (1998). https://doi.org/10.1109/ECTC.1998.678863

37.

Wang, C, He, X, “Effect of Atmospheric Pressure Dielectric Barrier Discharge Air Plasma on Electrode Surface.” Appl. Surf. Sci., 253 926–929. https://doi.org/10.1016/j.apsusc.2006.01.032 (2006)CrossRef

38.

Chung, PWK, Yuen, MMF, Chan, PCH, Ho, NKC, Lam, DCC, “Effect of Copper Oxide on the Adhesion Behavior of Epoxy Molding Compound-Copper Interface.” In: Proceedings-Electronic Components and Technology Conference, pp. 1665–1670 (2002). https://doi.org/10.1109/ECTC.2002.1008331

Titel: Effect of plasma treatment on the tribological and adhesion performance of a polymer coating deposited on different metallic substrates
verfasst von: Ahmed F. Abdelaal
M. Abdul Samad
Akeem Yusuf Adesina
M. M. A. Baig
Publikationsdatum: 01.07.2022
Verlag: Springer US
Erschienen in: Journal of Coatings Technology and Research / Ausgabe 6/2022
Print ISSN: 1547-0091
Elektronische ISSN: 1935-3804
DOI: https://doi.org/10.1007/s11998-022-00639-5

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 6/2022

Preparation, mechanical and thermal properties of polydimethylsiloxane coating for synthetic leathers

Use of MieLab software in scattering calculations

Nano-silica-containing acrylic polyurethane and acrylic-polyester hybrid polyurethane coatings for direct-to-metal (DTM) coating applications – a comparative study

Preparation of the hydrophilic coating layer on polypropylene microporous membrane surface by dip-coating the hydrophilic agent

Spectral decomposition of black coated fabrics to optimal feasible primaries

Tentative identification of BADGE derivatives in epoxy type coatings in a model sample: a beverage can

Premium Partner

Marktübersichten