nach oben

Geotechnical and Geological Engineering

Erschienen in:

15.02.2020 | Original Paper

Engineering Geology and Hydrogeology Aspects of Sedimentary Jurong Formation in Singapore: Implication on Safe Excavation of Underground Storage Caverns

verfasst von: Kar Winn

Erschienen in: Geotechnical and Geological Engineering | Ausgabe 4/2020

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The first commercial underground rock caverns for hydrocarbon storage in South East Asia, the Jurong Rock Caverns (JRC) Project, has recently been completed in Singapore. Extensive in situ permeability tests in boreholes and intact strength testing on rock cores were carried out to determine required design parameters in feasilibity study stage and during construction period. In-situ horizontal stresses of rock mass were measured in construction stage. After correlation between hydrogeological test results and geological characteristics of the tested interval, the geological and hydrogeological model is established. Geology face mapping were performed at every location after blasting of rock faces for the records of discontinuities parameters, Geological Strength Index (GSI), Tunnel Quality Index (Q) and Rock Mass Rating (RMR). The general correlation equation between Q and RMR in JRC is established. From the intact strength properties, equivalent rock mass parameters were successively determined after applying relevant GSI and D (Excavation Damage Factor) of rock masses. The main aim of this study is to document the new discoveries of the project including observation after broad analyses on the engineering properties for stability of the project.

Vorheriger Artikel Computational Analysis of Cyclic Fracture of Elastic Foundation Beam Under the Multifactor Effect

Nächster Artikel Study on the Influence of Coal Face Advancing Distance on Fault-Activated Water Inrush

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Alejano LR, Taboada J, Bastante FG, Rodriguez P (2008) Multi-approach back-analysis of a roof bed collapse in a mining room excavated in stratified rock. Int J Rock Mech Min Sci 45:899–913CrossRef

Barton NR, Lien R, Lunde J (1974) Engineering classification of rock masses for the design of tunnel support. Rock Mech 6(4):189–239CrossRef

Barton NR, Lien R, Lunde J (1977) Estimation of support requirements for underground excavations. In: 16th US symposium on rock mechanics, pp 164–177

Bieniawski ZT (1973) Engineering classification of jointed rock masses. Trans S Afr Inst Civ Eng 15:335–344

Bieniawski ZT (1974) Geomechanics classification of rock masses and its application in tunneling. In: Proceedings of the third international congress on rock mechanism, ISRM, Denver, pp 27–32

Bieniawski ZT (1975) Case studies: prediction of rock mass behavior by the geomechanics classification. In: 2nd AusNZ conference on geomechanics, Brisbane, 1975. Institution of Engineers, Australia, pp 36–41

Bieniawski ZT (1976) Rock mass classification in rock engineering. In: Proceedings of the symposium on exploration for rock engineering, Johannesburg, pp 97–106

Bieniawski ZT (1979) The geomechanics classification in rock engineering application. In: 4th international conference on rock mechanics, vol 2, ISRM, Montreux, pp 41–48

Bieniawski ZT (1984) Rock mechanics design in mining and tunneling. A.A Balkema, Rotterdam, p 272

Bieniawski ZT (1989) Engineering rock mass classification. Wiley, New York

Bieniawski ZT, Bernede MJ (1978) Suggested methods for determining the uniaxial compression strength and deformability of rock materials on laboratory test. In: International society of rock mechanics

Broms BB, Zhao J (1993) Potential use of underground caverns in Singapore. In: Proceedings of seminar on rock caverns for underground space utilization. Nanyang Technological University, Singapore, pp 11–21

Cai M, Kaiser PK, Uno H, Tasaka Y (2000) Comparative study of rock support system design practice for large-scale underground excavations. In: Proceedings of 4th North American rock mechnics symposium, Balkema, Rotterdam, pp 1027–1034

Cai M, Kaiser PK, Uno H, Tasaka Y, Minami M (2004) Estimation of rock mass deformation modulus and strength of jointed rock masses using GSI system. Int J Rock Mech Min Sci 41(1):3–49CrossRef

Cording EJ, Hendron AJ Jr, Deere DU (1971) Rock engineering for underground caverns. In: Proceedings of ASCE symposium on underground rock chambers, pp 567–600

Geostock (2007) Interpretation report on feasibility study of complementary site investigation report, proposed development of hydrocarbon caverns storage in Jurong Islands, p 138

Grimstad E, Barton N (1993) Updating the Q-system for NMT. In: Proceedings of the international symposium on sprayed concrete, Fagernes, Norway 1993, Norwegian Concrete Association, Oslo, 20 p

Hoek E (1994) Strength of rock and rock masses. ISRM News J 2(2):4–16

Hoek E, Brown ET (1980a) Underground excavation in rock. Institution of Mining and Metallurgy, London

Hoek E, Brown ET (1980b) Empirical strength criterion for rock mass. J Geotech Eng Div 106(GT9):1013–1035

Hoek E, Brown ET (1997) Practical estimates of rock mass strength. Int J Rock Mech Min Sci Geomech 34(8):1165–1186CrossRef

Hoek E, Diederichs M (2006) Empirical estimates of rock mass modulus. Int J Rock Mech Min Sci 43:203–215CrossRef

Hoek E, Wood D, Shah S (1992) A modified Hoek-Brown criterion for jointed rock masses. In: Proceedings of rock characterization, symposium on international society for rock mechanics: Eurock 1992, (Ed. J.A. Hudson), 209–214. British geotechnical society, London

Hoek E, Kaiser PK, Bawden WF (1995) Support of underground excavations in hard rock. Balkema, Rotterdam

Hoek E, Carranza-Torres CT, Corkum B (2002) Hoek-Brown failure criterion—2002 edition. In: Proceedings of the 5th North American rock mechanics symposium, Toronto, Canada, pp 267–273

Hoek E, Carter TG, Diederichs MS (2013) Quantification of the geological strength index chart. In: 47th US rock mechanics/geomechanics symposium, American Rock Mechanics Association, (2013) (ARMA 13-672)

Ibrahim E, Soubra AH, Mollon G, Raphael W, Dias D, Reda A (2015) Three-dimensional face stability analysis of pressurized tunnels driven in a multilayered purely frictional medium. Tunn Undergr Sp Technol 49:18–34CrossRef

ISRM (1981) Rock characterization testing and monitoring, ISRM suggested methods. Pergamon Press, Oxford, p 211

Jethwa JL, Dube AK, Singh B, Mithal RS (1982) Evaluation of methods for tunnel support design in squeezing rock conditions. In: Proceedings of 4th International Congress of International Association of Engineering Geology, Delhi, 1982, vol 5, pp 125–134

Kaiser PK, Diederichs MS, Martin CD, Sharp J, Steiner W (2000) Underground works in hard rock tunnelling and mining. In: Keynote lecture at GeoEng2000, Technomic Publishing Co., Melbourne, pp 841–926

Kiyoyama S (1990) The present state of underground crude oil storage technology in Japan. Tunn Undergr Sp Technol 5(4):343–349CrossRef

Kjørholt H (1991) Gas tightness of unlined hard rock caverns. PhD Thesis. Trondheim, Norway: Norwegian University of Science and Technology

Lei S (1999) An analytical solution for steady flow into a tunnel. Gr Water 37(1):23–26CrossRef

Li D, Wong LNY, Liu G, Zhang X (2012) Influence of water content and anisotropy on the strength and deformability of low porosity meta-sedimentary rocks under triaxial compression. Eng Geol 126:46–66CrossRef

Li SC, Wang ZC, Ping Y, Zhou Y, Zhang L (2014) Discrete element analysis of hydro-mechanical behavior of a pilot underground crude oil storage facility in granite in China. Tunn Undergr Sp Technol 40:75–84CrossRef

Lu M (1998) Finite element analysis of a pilot gas storage in rock cavern under high pressure. Eng Geol 49(3–4):353–361CrossRef

Lu M, Beitnes A, Broch E (2001) Rock mechanics problems related to underground gas storage in rock caverns. In: Frontiers of rock mechanics and sustainable development in the 21st century, proceedings of the 2nd Asian rock mechanics symposium. Beijing, pp 399–403

NTU (2013) Final report of the 2007–2012 Jurong rock cavern research by Wong, NY, Yang Y, Zhao Z, Goh TC, Low BK, vol I and II, School of Civil and Environmental Engineering, Nanyang Technological University, Singapore

Palmstrom A (1995) RMi—a rock mass characterization system for rock engineering purposes. Ph.D. Thesis, University of Oslo, Norway

PWD Public Works Department (1976) The geology of the Republic of Singapore, 79 p and 1 Geological Map of Singapore at scale 1:50,000

Rocscience Inc. (2004) RocData 3.0, User’s manual, Toronto, Canada

Rocscience Inc. (2013) Dips V 6.0, User’s manual, Toronto, Canada

Russo G (2007) Improving the reliability of GSI estimation: the integrated GSI-RMi system. In: ISRM workshop underground works under special conditions, Madrid

Russo G (2009) A new rational method for calculating the GSI. Tunn Undergr Sp Technol 24:103–111CrossRef

Rutledge JC, Perston RL (1978) Experience with engineering classifications of rocks. In: Proceedings of international tunnelling symposium, Tokyo

Serafim JL, Pereira JP (1983) Consideration of the geomechnical classification of Bieniawski. In: Proceedings of international symposium on engineering geology and underground construction, Lisbon 1(II), pp 33–44

Sonmez H, Ulusay R (1999) Modification to the geological strength index (GSI) and their applicability to stability of slopes. Int J Rock Mech Min Sci 36:743–760CrossRef

Sun JP, Zhao ZY (2010) Effects of anisotropic permeability of fractured rock masses on underground oil storage caverns. Tunn Undergr Sp Technol 25(5):629–637CrossRef

Sun JP, Zhao ZY, Zhang Y (2011) Determination of three-dimensional hydraulic conductivities using a combined analytical/neural network model. Tunn Undergr Sp Technol 26(2):310–319CrossRef

Waltham AC (1994) Foundations of engineering geology. Blackie Academic and Professional Publication, UK, p 88p

Winn K (2019) Engineering geological properties of jurong formation for underground cavern excavation in Singapore, PhD Thesis (2019), NTU, Singapore. https://www.doi.org/10.32657/10220/47602

Winn K, Ng M (2013) In situ stress measurement in Singapore. In: 18th SE geotechnical and inaugural AGSSEA conference, Singapore, May 2013

Winn K, Wong NY (2019) Quantitative GSI determination of Singapore’s sedimentary rock mass by applying four different approaches. Geotech Geol Eng 37:2103–2119. https://doi.org/10.1007/s10706-018-0748-8 CrossRef

Winn K, Ng M, Wong NY (2017) Stability analysis of underground storage cavern excavation in Singapore. In: Symposium of the international society for rock mechanics (Eurock 2017) Czech Republic. Procedia Engineering 191 (2017) pp 1040–1045

Winn K, Wong NY, Zaw K, Thompson J (2018) The Ayer Chawan Facies, Jurong Formation, Singapore: Age and observation of syndepositional pyroclastic sedimentation process with possible peperite formation. Bull Geol Soc Malays 66:25–31CrossRef

Woon LK, Yingxin Z (2009) Geology of Singapore, 2nd edn. Defence Science and Technology Agency, Singapore

Zhao J, Choa V, Broms BB (1996) Construction and utilization of rock caverns in Singapore part B: development costs and utilization. Tunn Undergr Sp Technol 11(1):73–79CrossRef

Zhao J, Liu Q, Lee KW, Choa V, Teh CI (1999a) Underground cavern development in the Jurong sedimentary rock formation. Tunn Undergr Sp Technol 14(4):449–459CrossRef

Zhao J, Zhou YX, Hefny AM, Cai JG, Chen SG, Li HB, Liu JF, Jain M, Foo ST, Seah CC (1999b) Rock dynamics research related to cavern development for ammunition storage. Tunn Undergr Sp Technol 14(4):513–526CrossRef

Zhao J, Ng WL, Cai JG, Zhang XH, Bian HY (2004) Feasibility of underground hydrocarbon storage caverns at Jurong Island. Tunn Undergr Sp Technol 19(4–5):364

Titel: Engineering Geology and Hydrogeology Aspects of Sedimentary Jurong Formation in Singapore: Implication on Safe Excavation of Underground Storage Caverns
verfasst von: Kar Winn
Publikationsdatum: 15.02.2020
Verlag: Springer International Publishing
Erschienen in: Geotechnical and Geological Engineering / Ausgabe 4/2020
Print ISSN: 0960-3182
Elektronische ISSN: 1573-1529
DOI: https://doi.org/10.1007/s10706-020-01232-6

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 4/2020

Effect of Type of Explosive and Blast Hole Diameter on Boulder Count in Limestone Quarry Blasting

Treatment of Dredged Sediments of Bouhanifia Dam for Their Valorization in Passive Barrier of Landfill

Experimental Study and Numerical Simulation on Rock-Like Materials Containing Weak Layers and Holes

Safety Performance Evaluation (SPE) of Uncertainty Quantification Based on Grey Dynamic Modeling: Case Study of a Coal Mine in China

The Effect of Indentation Rate on Rock Breakages Characteristics

Factors Influencing Stope Hanging Wall Stability and Ore Dilution in Narrow-Vein Deposits: Part II