nach oben

Erschienen in:

2017 | OriginalPaper | Buchkapitel

Experimental and FEM Analysis on the Mechanical Properties of Al-8011 Alloy Reinforced with Fly-Ash and E-Glass Fibers

verfasst von : Chetan Kulkarni, Akshay Mohan Pujar, Balappa Hadagali

Erschienen in: Materials, Energy and Environment Engineering

Verlag: Springer Singapore

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The objective of the current study is to investigate the effect of E-glass fibers and fly ash reinforcements on the mechanical properties of Al-8011 hybrid composites. The Al-8011 alloy is reinforced with E-glass fibers and fly ash particulates by using stir casting technique. The metal matrix composites with different composition of E-glass fibers (weight percentage, %) and constant fly-ash particulates (weight %) were prepared. The tensile, compression and hardness behaviour of the composite were investigated experimentally. Maximum tensile and compression strength is observed for Al-8011+6 % fly ash+5 %+E-glass fiber composite. Improvement in hardness was observed with increasing percentage of E-glass fiber. Besides, tensile and compressive behaviour were analytically analysed using ANSYS Workbench 15.0. The experimental results were found to be in good accordance with the analytical results. An average error percentage of 4.5 and 6.5 % was found when experimental and analytical results were compared for both tensile and compression tests. The fracture surfaces of the tensile and compression specimens were examined using scanning electron microscope (SEM).

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel Development of Bio-Based Epoxide from Plant Oil

Nächstes Kapitel Effects of Single, Double, Triple and Quadruple Window Glazing of Various Glass Materials on Heat Gain in Green Energy Buildings

Arunkumar, M.B., Swamy, R.P.: Evaluation of mechanical properties of Al6061, fly ash and E-glass fibre fiber reinforced hybrid metal matrix composites. ARPN J. Eng. Appl. Sci. 6, 1–7 (2011)

Ganesh Kumar, A.G., Ranganath, G., Pounraj, B., Shylin Jose, H., Sakthivel, M.: Experimental analysis of E-glass fibre fiber and fly ash reinforced to E-waste aluminium. J. Chem. Pharm. Sci. 4, 138–140 (2014)

Halpin, J.C., Kardos, J.L.: The Halpin-Tsai equations: a review. Polym. Eng. Sci. 16, 344–352 (1976)CrossRef

Hamouda, A.M.S., Sulaiman, S., Vijayaram, T.R., Sayuti, M., Ahmad, M.H.M.: Processing and characterization of particulate reinforced aluminium silicon matrix composite. J. Achievements Mat. Manufact. Eng. 25, 11–16 (2007)

Pavanu Sai, J., Srinivasa Rao, A., Dr. Hari Babu, N.: Experimental investigation of effect of aluminum filler material on thermal properties of palmyra fiber reinforced composite. Int. J. Eng. Res. Ind. Appl. 4, 23–29 (2014)

Prabhakar, K., Shivanand, H.K., Santhosh Kumar, S.: Experimental studies on mechanical properties of E-glass short fibers and fly ash reinforced Al 7075 hybrid metal matrix composites. Int. J. Appl. Res. Mech. Eng. 1(4), 111–115 (2012)

Prajit, R., Santhosh Kumar, V., Sathwik, V., Anantha Narayanan, R.: Evaluation of mechanical properties of Al 6061, fly ash reinforced with E-glass fiber composites. IOSR J. Mech. Civ. Eng. 11, 33–39 (2014)

Ramesh, D., Swamy, R.P., Chandrashekar, T.K.: Effect of weight percentage on mechanical properties of frit particulate reinforced Al 6061 composite. ARPN J. Eng. Appl. Sci. 5, 32–36 (2010)

Sakthivel, A., Palaninathan, R., Velmuruganand, R., Rao, P.R.: Production and mechanical properties of SiC particle reinforced 2618 aluminium alloy composites. J Mater Sci. 43, 7047–7056 (2008)

Shanmughasundaram, P., Subramanian, R., Prabhu, G.: Some studies on aluminium—fly ash composites fabricated by two step stir casting method. Eur. J. Appl. Eng. Sci. Res. 63, 204–218 (2011)

Sudarshan, Surappa, M.K.: Synthesis of fly ash particle reinforced A356 Al composites and their characterization. J. Mat. Sci. Eng. A. 480, 117–124 (2008)

Yogananda, A., Shivanand, H.K., Santhosh Kumar, S.: Investigation on mechanical properties of E-glass fibre and fly ash reinforced Al 8011 based hybrid composites. Int. J. Mech. Eng. Technol. 4, 78–83 (2013)

Titel: Experimental and FEM Analysis on the Mechanical Properties of Al-8011 Alloy Reinforced with Fly-Ash and E-Glass Fibers
verfasst von: Chetan Kulkarni
Akshay Mohan Pujar
Balappa Hadagali
Verlag: Springer Singapore
Buch: Materials, Energy and Environment Engineering
Print ISBN: 978-981-10-2674-4

Electronic ISBN: 978-981-10-2675-1

Copyright-Jahr: 2017
DOI: https://doi.org/10.1007/978-981-10-2675-1_4

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht