nach oben

Erschienen in:

2020 | OriginalPaper | Buchkapitel

Friction Stir Processing of Magnesium Alloy with Spiral Tool Path Strategy

verfasst von : Abhishek Kumar, Aarush Sood, Nikhil Gotawala, Sushil Mishra, Amber Shrivastava

Erschienen in: Magnesium Technology 2020

Verlag: Springer International Publishing

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Friction stir processing is a relatively new technique for microstructural modification to improve the mechanical properties of materials. Previous works have been primarily focused on the processing of the small regions. The objective of this work is to study the effect of tool design, tool rotation direction and tool overlap between passes on the processed region. A spiral tool path strategy is employed to process the complete blanks of a magnesium alloy. Three tool designs: tool with hexagonal, tapered and threaded pin, are used. Further, tool rotation direction and tool overlap between passes are varied across the experiments. The material flow and defects formed in the processed region are characterized. Preliminary results show that tool rotation direction and tool overlap significantly affect the defects formed in the processed region. The present work identifies the processing condition for defect-free processed region and refined microstructure of the Magnesium blank.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel Asymmetric Rolling of TZ73 Magnesium Alloy to Improve Its Ductility

Nächstes Kapitel Joining Dissimilar Materials via Rotational Hammer Riveting Technique

J.Q. Su, T. W. Nelson, and C. J. Sterling, “A new route to bulk nanocrystalline materials,” J. Mater. Res., vol. 18, no. 8, pp. 1757–1760, 2003.

C. I. Chang, X. H. Du, and J. C. Huang, “Achieving ultrafine grain size in Mg–Al–Zn alloy by friction stir processing,” Scr. Mater., vol. 57, no. 3, pp. 209–212, 2007.

C. I. Chang, C. J. Lee, and J. C. Huang, “Relationship between grain size and Zener-Holloman parameter during friction stir processing in AZ31Mg alloys,” Scr. Mater., vol. 51, no. 6, pp. 509–514, 2004.

B. M. Darras, M. K. Khraisheh, F. K. Abu-Farha, and M. A. Omar, “Friction stir processing of commercial AZ31 magnesium alloy,” J. Mater. Process. Technol., vol. 191, no. 1–3, pp. 77–81, 2007.

A.M. Jamili, A. Zarei-Hanzaki, H.R. Abedi, P. Minarik, and R. Soltani, “The microstructure, texture, and room temperature mechanical properties of friction stir processed Mg–Y–Nd alloy,” Mater. Sci. Eng. A, pp. 244–253, 2017.

A. Raja, P. Biswas, and V. Pancholi, “Effect of layered microstructure on the superplasticity of friction stir processed AZ91 magnesium alloy,” Mater. Sci. Eng. A, vol. 725, no. January, pp. 492–502, 2018.

R. S. Mishra, M. W. Mahoney, S. X. McFadden, N. A. Mara, and A. K. Mukherjee, “High strain rate superplasticity in a friction stir processed 7075 Al alloy,” Scr. Mater., vol. 42, no. 2, pp. 163–168, 1999.

M. M. El-Rayes and E. A. El-Danaf, “The influence of multi-pass friction stir processing on the microstructural and mechanical properties of Aluminum Alloy 6082,” J. Mater. Process. Technol., vol. 212, no. 5, pp. 1157–1168, 2012.

R. M. Leal and A. Loureiro, “Effect of overlapping friction stir welding passes in the quality of welds of aluminium alloys,” Mater. Des., vol. 29, no. 5, pp. 982–991, 2008.

10.

S. K. Singh, R. J. Immanuel, S. Babu, S. K. Panigrahi, and G. D. Janaki Ram, “Influence of multi-pass friction stir processing on wear behaviour and machinability of an Al-Si hypoeutectic A356 alloy,” J. Mater. Process. Technol., vol. 236, pp. 252–262, 2016.

11.

N. Nadammal, S. V. Kailas, J. Szpunar, and S. Suwas, “Microstructure and Texture Evolution during Single- and Multiple-Pass Friction Stir Processing of Heat-Treatable Aluminum Alloy 2024,” Metall. Mater. Trans. A, vol. 48, no. 9, pp. 4247–4261, 2017.

12.

N. Nadammal, S. V. Kailas, J. Szpunar, and S. Suwas, “Development of microstructure and texture during single and multiple pass friction stir processing of a strain hardenable aluminium alloy,” Mater. Charact., vol. 140, no. January, pp. 134–146, 2018.

13.

Y. Chen, H. Ding, J. Li, Z. Cai, J. Zhao and W. Yang, “Influence of multi-pass friction stir processing on the microstructure and mechanical properties of Al-5083 alloy,” Mater. Sci. Eng. A, vol. 650, pp. 281–289, 2016.

14.

Y. Chen, H. Ding, S. Malopheyev, R. Kaibyshev, Z. H. Cai, and W. Yang, “Influence of multi-pass friction stir processing on microstructure and mechanical properties of 7B04–O Al alloy,” Trans. Nonferrous Met. Soc. China (English Ed.), vol. 27, no. 4, pp. 789–796, 2017.

15.

M. Sharifitabar, M. Kashefi, and S. Khorshahian, “Effect of friction stir processing pass sequence on properties of Mg–ZrSiO4–Al2O3 surface hybrid micro/nano-composites,” Mater. Des., vol. 108, pp. 1–7, 2016.

16.

G. Padmanaban and V. Balasubramanian, “Selection of FSW tool pin profile, shoulder diameter and material for joining AZ31B magnesium alloy - An experimental approach,” Mater. Des., vol. 30, no. 7, pp. 2647–2656, 2009.

17.

M. Azizieh, R. Bahadori, M. Abbasi, E. Y. Yoon, and H. S. Kim, “Effect of friction stir processing on the microstructure of pure magnesium castings,” Int. J. Cast Met. Res., vol. 28, no. 6, pp. 345–351, 2015.

18.

S. Mironov, T. Onuma, Y. S. Sato, and H. Kokawa, “Microstructure evolution during friction-stir welding of AZ31 magnesium alloy,” Acta Mater., vol. 100, pp. 301–312, 2015.

Titel: Friction Stir Processing of Magnesium Alloy with Spiral Tool Path Strategy
verfasst von: Abhishek Kumar
Aarush Sood
Nikhil Gotawala
Sushil Mishra
Amber Shrivastava
Verlag: Springer International Publishing
Buch: Magnesium Technology 2020
Print ISBN: 978-3-030-36646-9

Electronic ISBN: 978-3-030-36647-6

Copyright-Jahr: 2020
DOI: https://doi.org/10.1007/978-3-030-36647-6_31

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht