nach oben

Erschienen in:

2014 | OriginalPaper | Buchkapitel

7. Friction Stir Welding of High Temperature Alloys

verfasst von : Rajiv Sharan Mishra, Partha Sarathi De, Nilesh Kumar

Erschienen in: Friction Stir Welding and Processing

Verlag: Springer International Publishing

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

High temperature alloys pose an interesting challenge to friction stir welding. In the previous chapters on aluminum and magnesium alloys, we dealt with matrix elements that do not undergo allotropic transitions. This implies that the microstructural changes were limited to grain size and precipitates. Among high temperature alloys of industrial significance, the present chapter is limited to titanium alloys and steels. Both alloy systems involve complexity of phase transformation, and therefore peak temperature as well as cooling rate during friction stir welding makes a significant difference. Nickel base alloys and copper alloys are not covered in this book, but much of what is discussed applies to those. Students and readers can apply the treatment of alloys covered in this book to nickel and copper alloys by selecting the right type of physical metallurgy.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel Friction Stir Welding of Magnesium Alloys

Nächstes Kapitel Dissimilar Metal Friction Stir Welding

H.K.D.H. Bhadeshia, R. Honeycombe, Steels - Microstructure and Properties, Elsevier (2006)

G. Buffa, A. Ducato, L. Fratini, FEM based prediction of phase transformations during Friction Stir Welding of Ti-6Al-4V titanium alloy. Mater. Sci. Eng. A 581, 56 (2013)CrossRef

G. Cam, Friction stir welded structural materials: beyond Al-alloys. Int. Mater. Rev. 56, 1–48 (2011)CrossRef

L. Cui, H. Fujii, N. Tsuji, K. Nogi, Friction stir welding of a high carbon steel. Scr. Mater. 56, 637–640 (2007a)CrossRef

L. Cui, H. Fujii, N. Tsuji, K. Nakatak, K. Nogi, R. Ikeda, M. Matsushita, Transformation in stir zone of friction stir welded carbon steels with different carbon contents. ISIJ Int. 47, 299–306 (2007b)CrossRef

A.K. Dutt and R.S. Mishra, unpublished research (2014)

P. Edwards, M. Ramulu, Identification of process parameters for friction stir welding Ti-6Al-4V. J. Eng. Mater. Technol. 132, 1–10 (2010)CrossRef

H. Fujii, L. Cui, N. Tsuji, M. Maedac, K. Nakata, K. Nogi, Friction stir welding of carbon steels. Mater. Sci. Eng. A 429, 50 (2006)CrossRef

M. Ghosh, K. Kumar, R.S. Mishra, Friction stir lap welded advanced high strength steels: microstructure and mechanical properties. Mater. Sci. Eng. A 528(28), 8111–8119 (2011)CrossRef

G. Krauss, Steels: Processing, Structure, and Performance (ASM International, Materials Park, 2005)

S. Klingensmith, J.N. DuPont, A.R. Marder, Weld. J. 84, 77s–85s (2005)

N. Kumar et al., The effects of friction stir welding on the microstructural evolution and mechanical properties of Ti-6Al-4V alloy, in Friction Stir Welding and Processing V (TMS, Warrendale, 2009), pp. 45–53

W.B. Lee, C.Y. Lee, W.S. Chang, Y.M. Yeon, W.B. Jung, Microstructural investigation of friction stir welded pure titanium. Mater. Lett. 59, 3315–3318 (2005)CrossRef

T.J. Lienert, Microstructure and mechanical properties of friction stir welded titanium alloys, in Friction Stir Welding and Processing, ed. by R.S. Mishra, M.W. Mahoney (ASM International, Materials Park, 2007), pp. 123–154. ISBN-13: 978-0-87170-840-3

H.J. Liu et al., Microstructural evolution mechanism of hydrogenated Ti-6Al-4V in the friction stir welding and post-weld dehydrogenation process. Scr. Mater. 61, 1008–1011 (2009)CrossRef

H. Liu et al., Study of the key issues of friction stir welding of titanium alloy. Mater. Sci. Forum 638–642, 1185–1190 (2010)CrossRef

G. Lütjering, J.C. Williams, Titanium (Springer, Berlin, 2007). ISBN 978-3-540-71397-5

R. Ohashi, M. Fujimoto, S. Mironov, Y.S. Sato, H. Kokowa, Sci. Technol. Weld. Join. 14(3), 221–227 (2009)

S. Park, Y. Sato, H. Kokawa et al., Microstructural characterisation of stir zone containing residual ferrite in friction stir welded 304 austenitic stainless steel. Sci. Technol. Weld. Join. 10, 550 (2005)CrossRef

S. Pasta, A.P. Reyonds, Residual stress effects on fatigue crack growth in Ti-6Al-4V friction stir weld. Fatig. Fract. Eng. Mater. Struct. 31, 569–580 (2008)CrossRef

A.L. Pilchak et al., The relationship between friction stir weld parameters and microstructure in investment cast Ti-6Al-4V, in Stir Welding and Processing IV (TMS, Warrendale, 2007), pp. 419–427 (2007b)

A.L. Pilchak, M.C. Juhas, J.C. Williams, Observations of Tool-Workpiece Interactions during Friction stir welding of Ti-6Al-4V. Metall. Mater. Trans. A 38A(2), 435–437 (2007a)

A.L. Pilchak et al., Microstructure evolution during friction stir welding of mill-annealed Ti-6Al-4V. Metall. Mater. Trans. A 11 (2010)

A.L. Pilchak and J.C. Williams, Microstructure and texture evolution during friction stir processing of fully lamellar Ti-6Al-4V, Metall. Mater. Trans. A. 42A, 745 (2011)

J.A. Querin et al. Effect of weld tool geometry on friction stir welded Ti-6Al-4V, in Trends in Welding Research (ASM International, Materials Park, 2009), pp. 108-112

A.J. Ramirez, M.C. Juhas, Microstructural evolution in Ti-6Al-4v friction stir welds. Mater. Sci. Forum 426–432, 2999–3004 (2003)CrossRef

A. Reynolds, W. Tang, T. Gnaupel-Herold, H. Prask, Structure, properties, and residual stress of 304L stainless steel friction stir welds. Scr. Mater. 48, 1289 (2003)CrossRef

A.P. Reynolds, E. Hood, W. Tang, Texture in friction stir welds of Timetal 21S. Scr. Mater. 52, 491–494 (2005)CrossRef

Y.S. Sato, N. Harayama, H. Kokawa, H. Inoue, Y. Tadokoro, S. Tsuge, Evaluation of microstructure and properties in friction stir welded superaustenitic stainless steel. Sci. Technol. Weld. Join. 14, 203 (2009)CrossRef

Y. Sato, M. Miyake, H. Kokawa, T. Omori, K. Ishida, S. Imano, S. Park, S. Hirano, in Development of Co-Based Alloy FSW Tool for High-Softening-Temperature Materials, Friction Stir Welding and Processing VI, ed. by R.S. Mishra, M.W. Mahoney, Y. Sato, Y. Hovanski, R. Verma. 2011 TMS annual meeting, pp. 1–9 (2011)

R.S. Mishra, M.W. Mahoney, S.X. McFadden, N.A. Mara, A.K. Mukherjee, High strain rate superplasticity in a friction stir processed 7075 al alloy. Scr. Mater. 42, 163 (1999)CrossRef

J. Su, J. Wang, R.S. Mishra, R. Xu, J.A. Baumann, Microstructure and mechanical properties of a friction stir processed Ti-6Al-4V alloy. Mater. Sci. Eng. A 573, 67–74 (2013)CrossRef

B.M. Tweedy, W. Arbegast, C. Allen, in Friction Stir Welding and Processing III, ed. by K.V. Jata et al.(TMS, Warrendale, 2005), pp. 97–104

C.F. Yolton, F.H. Froes, R.F. Malone, Alloying element effects in metastable beta titanium alloys. Metall. Trans. A 10, 132–134 (1979)CrossRef

Y. Zhang, Y.S. Sato, H. Kokawa, S.H.C. Park, S. Hirano, Microstructural characteristics and mechanical properties of Ti-6Al-4V friction stir welds. Mater. Sci. Eng. A 485, 448–455 (2008a)CrossRef

Y. Zhang, Y.S. Sato, H. Kokawa, S.H.C. Park, S. Hirano, Stir zone microstructure of commercial purity titanium friction stir welded using pcBN tool. Mater. Sci. Eng. A 488, 25–30 (2008b)CrossRef

L. Zhou et al., The stir zone microstructure and its formation mechanism in Ti-6Al-4V friction stir welds. Scr. Mater. 61, 596–599 (2009)CrossRef

Titel: Friction Stir Welding of High Temperature Alloys
verfasst von: Rajiv Sharan Mishra
Partha Sarathi De
Nilesh Kumar
Verlag: Springer International Publishing
Buch: Friction Stir Welding and Processing
Print ISBN: 978-3-319-07042-1

Electronic ISBN: 978-3-319-07043-8

Copyright-Jahr: 2014
DOI: https://doi.org/10.1007/978-3-319-07043-8_7

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht