Skip to main content

2019 | OriginalPaper | Buchkapitel

Influence of Water Injection on Performance of Diesel Engine

verfasst von : A. Startcev, S. Romanov, G. Romanova

Erschienen in: Proceedings of the 4th International Conference on Industrial Engineering

Verlag: Springer International Publishing

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config
loading …

Abstract

The article presents the results of research to improve the fuel efficiency of the engine 4F 11/12.5 (D-240) using water injection. The relevance of the use of water (water vapor condensate) as an additive to hydrocarbon fuel is shown, which contributes to the increase in power and fuel efficiency in the operation of the internal combustion engine. It was experimentally established that the greatest increase in the effective power of a diesel engine 4F 11/12.5 (D-240) is observed when water is supplied in a volume equal to 27–32% of the volume of the cyclic supply of diesel fuel. It has been experimentally established that with an increase in the volume of supplied water, the temperature of the exhaust gases decreases, with an average intensity of about 1 °C per 1% of the water supply. The greatest decrease in the temperature of the exhaust gases was noted at the maximum torque regime. The results of the studies showed a steady increase in the indicator pressure by an average of 18–22%. A decrease in the rigidity of the operation of the investigated engine is achieved, which is explained by a decrease in the rate of change in the indicator pressure (on average by 5–15%), in comparison with work on diesel fuel.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Literatur
1.
Zurück zum Zitat Romanov S, Vagin D (2015) Economic evaluation of the efficiency of water and water-alcohol injection during the operation of machine-tractor units. Int Tech Econ J 1:18–22 Romanov S, Vagin D (2015) Economic evaluation of the efficiency of water and water-alcohol injection during the operation of machine-tractor units. Int Tech Econ J 1:18–22
2.
Zurück zum Zitat Startsev A, Romanov S (2015) Increase of fuel economy of agricultural units on the basis of tractors MTZ-80/82 by using water injection. Agrofood Policy Russ 1:16–19 Startsev A, Romanov S (2015) Increase of fuel economy of agricultural units on the basis of tractors MTZ-80/82 by using water injection. Agrofood Policy Russ 1:16–19
3.
Zurück zum Zitat Bystrov O (2008) Increase of economic and ecological parameters of a diesel engine by realization of the combined six-stroke cycle. Dissertation, SUSU, Chelyabinsk Bystrov O (2008) Increase of economic and ecological parameters of a diesel engine by realization of the combined six-stroke cycle. Dissertation, SUSU, Chelyabinsk
4.
Zurück zum Zitat Vedruchenko V, Koksharov M, Krainov V (1998) Catalytic effect of aqueous phase of water-fuel emulsions and mobile schemes for their preparation. Ind Power Eng 6:47–49 Vedruchenko V, Koksharov M, Krainov V (1998) Catalytic effect of aqueous phase of water-fuel emulsions and mobile schemes for their preparation. Ind Power Eng 6:47–49
6.
Zurück zum Zitat Gritsenko A, Kukov S, Bakaykin D (2011) The method of diagnosing the fuel supply system for internal combustion engines of cars. AIC Russ 59:30–32 Gritsenko A, Kukov S, Bakaykin D (2011) The method of diagnosing the fuel supply system for internal combustion engines of cars. AIC Russ 59:30–32
7.
Zurück zum Zitat Plaksin A, Glemba K, Gritsenko A (2015) Modernization of the turbocharger lubrication system of an internal combustion engine. Procedia Eng 129:857–862CrossRef Plaksin A, Glemba K, Gritsenko A (2015) Modernization of the turbocharger lubrication system of an internal combustion engine. Procedia Eng 129:857–862CrossRef
8.
Zurück zum Zitat Gurevich M (1944) The system of water injection into the engine on the new American fighter R-47 “Sunderbolt”. In: Express information BNT NCAP, vols. 2 and 7, Moscow Gurevich M (1944) The system of water injection into the engine on the new American fighter R-47 “Sunderbolt”. In: Express information BNT NCAP, vols. 2 and 7, Moscow
9.
Zurück zum Zitat Kaidash N et al (1946) Water injection into aircraft engines. Research Institute GVF, Editorial and Publishing Department Aeroflot, Moscow Kaidash N et al (1946) Water injection into aircraft engines. Research Institute GVF, Editorial and Publishing Department Aeroflot, Moscow
10.
Zurück zum Zitat Kormilitsyn V, Lyskov M, Zbrailov I et al (1986) Suppression of nitrogen oxides by injection of water into the combustion zone on the steam boiler TGMP-314C. Proc Mosc Power Eng Inst 110:43–51 Kormilitsyn V, Lyskov M, Zbrailov I et al (1986) Suppression of nitrogen oxides by injection of water into the combustion zone on the steam boiler TGMP-314C. Proc Mosc Power Eng Inst 110:43–51
11.
Zurück zum Zitat Cookies B, Smolin A (2003) Indicator diagram of a steam engine for utilization of heat of exhaust gases of combustion engines. In: Materials of the international scientific-technical conference on “Actual problems of theory and practice of modern engine building”, Chelyabinsk, pp 39–41 Cookies B, Smolin A (2003) Indicator diagram of a steam engine for utilization of heat of exhaust gases of combustion engines. In: Materials of the international scientific-technical conference on “Actual problems of theory and practice of modern engine building”, Chelyabinsk, pp 39–41
12.
Zurück zum Zitat Cookies B, Gizatulin P, Minkovich E et al (2002) Engine with external heat input and internal steam generation for utilization of heat of exhaust gases of combustion engines. Patent of useful model RU 21070, U1, 7 F 01 G 5/02. Pub. 20.08.2002, bul. 24 Cookies B, Gizatulin P, Minkovich E et al (2002) Engine with external heat input and internal steam generation for utilization of heat of exhaust gases of combustion engines. Patent of useful model RU 21070, U1, 7 F 01 G 5/02. Pub. 20.08.2002, bul. 24
13.
Zurück zum Zitat Lewis B, Elbe G (1968) Burning, flames and explosions in gases. Translated from English by Shchelkin KI, Borisov AA (eds). Mir, Moscow Lewis B, Elbe G (1968) Burning, flames and explosions in gases. Translated from English by Shchelkin KI, Borisov AA (eds). Mir, Moscow
14.
Zurück zum Zitat Martynenko V (1944) Injection of water into a fuel-air mixture, vols. 1–2. Foreign Aircraft Engineering of the Research Institute of the Air Force, Moscow Martynenko V (1944) Injection of water into a fuel-air mixture, vols. 1–2. Foreign Aircraft Engineering of the Research Institute of the Air Force, Moscow
15.
Zurück zum Zitat Sakulin R (2010) Reduction of nitrogen emissions in combustion engines with a unified working process when working on watered ethanol. Dissertation, Ufa State Aviation Technical University Sakulin R (2010) Reduction of nitrogen emissions in combustion engines with a unified working process when working on watered ethanol. Dissertation, Ufa State Aviation Technical University
16.
Zurück zum Zitat Smolin A (2003) Modeling of the working process of a recycling engine with internal volumetric evaporation. In: Materials of the international scientific-technical conference on “Actual problems of theory and practice of modern engine building”, Chelyabinsk, pp 147–150 Smolin A (2003) Modeling of the working process of a recycling engine with internal volumetric evaporation. In: Materials of the international scientific-technical conference on “Actual problems of theory and practice of modern engine building”, Chelyabinsk, pp 147–150
17.
Zurück zum Zitat Storozhev I (2011) Increase of fuel economy of MTZ-80/82 tractors in agricultural work due to use of water-air mixture. Dissertation, Chelyabinsk State Agroengineering Academy Storozhev I (2011) Increase of fuel economy of MTZ-80/82 tractors in agricultural work due to use of water-air mixture. Dissertation, Chelyabinsk State Agroengineering Academy
18.
Zurück zum Zitat Trelina K (2007) Evaporative humidification of the air charge of agricultural machinery to reduce emissions of nitrogen oxides (using the D-120 engine as an example). Dissertation, GosNITI, Moscow Trelina K (2007) Evaporative humidification of the air charge of agricultural machinery to reduce emissions of nitrogen oxides (using the D-120 engine as an example). Dissertation, GosNITI, Moscow
19.
Zurück zum Zitat Romanov S, Vagin D (2015) Increase of fuel economy of machine-tractor units on the basis of tractors MTZ-80/82 using water and water-alcohol injection. Int Tech Econ J 1:90–94 Romanov S, Vagin D (2015) Increase of fuel economy of machine-tractor units on the basis of tractors MTZ-80/82 using water and water-alcohol injection. Int Tech Econ J 1:90–94
20.
Zurück zum Zitat Startsev A, Romanov S (2014) Increase of the efficiency of the diesel engine operation due to the use of water injection. Agrofood Policy Russ 12:67–70 Startsev A, Romanov S (2014) Increase of the efficiency of the diesel engine operation due to the use of water injection. Agrofood Policy Russ 12:67–70
21.
Zurück zum Zitat Startsev A, Romanov S, Vagin D (2016) Device for supplying a water-alcohol mixture to a diesel internal combustion engine 4F 11/12.5. Patent for utility model RU 166572 (Registered in the State Register of Utility Models of the Russian Federation on November 14, 2016) Startsev A, Romanov S, Vagin D (2016) Device for supplying a water-alcohol mixture to a diesel internal combustion engine 4F 11/12.5. Patent for utility model RU 166572 (Registered in the State Register of Utility Models of the Russian Federation on November 14, 2016)
Metadaten
Titel
Influence of Water Injection on Performance of Diesel Engine
verfasst von
A. Startcev
S. Romanov
G. Romanova
Copyright-Jahr
2019
DOI
https://doi.org/10.1007/978-3-319-95630-5_225

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.