nach oben

Erschienen in:

2019 | OriginalPaper | Buchkapitel

Intensification of Technical Grinding Modes by Managing Physical Processes of Chip Formation

verfasst von : O. G. Kulik, E. D. Illarionova

Erschienen in: Proceedings of the 4th International Conference on Industrial Engineering

Verlag: Springer International Publishing

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The article describes the control mechanism of interaction between the abrasive grain and the processed metal, the interaction being based on the hypothesis of the shift in the phase transition points under the Clausius–Clapeyron’s law, when the temperature and pressure rise at a high speed in the contact arc between the inclined blunting site of the abrasive grain and the metal. The metal separated from the bulk and consolidated like this, shortly remaining extra hard at the melting temperature, is itself capable to make an edge micro cut of the chips when it moves together with the grain at a speed of 10⁻⁵–10⁻⁶ s and higher.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel Monitoring of Grinding Process with Help of Automatic Measuring Complex

Nächstes Kapitel Tools for Electrical-Discharge Hole Drilling

Poluhin PI et al (1983) Resistance to plastic de-formation of metals and alloys. Mechanical Engineering, Moscow, 276 p

Filimonov LN (1979) High-speed grinding. Mashinostroyenie, Leningrad, p 248

Shumyacher VM, Slavin AV (2008) The mechanical and chemical principles of abrasive processing management with the help of LCTM. In: Digest of the All-Russia scient.-tech. conf.: New chemical technologies: production and application. Technology of mechanical engineering, pp 29–32

Lahtin YM (1976) Metallurgy and heat treatment of metals. Metallurgy, Moscow, p 231

Kaplonek W et al (2016) Morphology of near- and semispherical melted chips after the grinding processes using sol-gel abrasives based on SEM-imaging and analysis. Adv Mater Sci Eng. https://doi.org/10.1155/2016/2573920CrossRef

Nadolny K, Kaplonek W (2016) The effect of wear phenomena of grinding wheels with sol-gel alumina on chip formation during internal cylindrical plunge grinding of 100Cr6 steel. Int J Adv Manuf Technol 87(1):501–517. https://doi.org/10.1007/s00170-016-8500-0CrossRef

Wong YC, Doyle ED (1999) Implications of high strain de-formation in grinding. Wear 233:395–401. https://doi.org/10.1016/S0043-1648(99)00205-7CrossRef

Doyle ED, Dean SK (1980) An insight into grinding from materials viewpoint. CIRP Ann Manuf Technol 29(2):571–575. https://doi.org/10.1016/S0007-8506(16)30155-XCrossRef

Malkin S (1979) Negative rake cutting to simulate chip formation in grinding. CIRP Ann Manuf Technol 28(1):209–212

10.

Setti D et al (2014) An investigation into the application of Al2O3nanofluid-based minimum quantity lubrication technique for grinding of Ti-6Al-4V. Int J Precis Technol 4(3/4):268–279. https://doi.org/10.1504/ijptech.2014.067742CrossRef

11.

Bykadorova OG (2008) More efficient deep grinding. Russ Eng Res 28:836–837. https://doi.org/10.3103/S1068798X08080261CrossRef

12.

Kulik OG, Demenkov VA (2017) Kinematics and dynamics of chip formation during grinding. Proc Eng 206:210–215. https://doi.org/10.1016/j.proeng.2017.10.462CrossRef

13.

Kulik OG, Demenkov VA (2017) The management of kinematic factors for the improvement of performance of deep grinding. Proc Eng 206:2016–2221. https://doi.org/10.1016/j.proeng.2017.10.463CrossRef

14.

Jacobson MO (1956) Roughness, work hardening and residual stresses during machining. Mashgiz, Moscow

15.

Carslaw G, Jager D (1964) Thermal conductivity of solids. Nauka, Moscow

16.

Bykadorova OG, Shumyacher VM (2003) The mechanism of metal dispersion of abrasive grain, In: Proceedings of International scientific and engineering conference “Shlifabraziv-2003”. Volzhsky, pp 38–39

17.

Bykadorova OG, Shumyacher VM (2004) Relationship management of abrasive grain and metal to be treated in order to increase the efficiency of the grinding. In: Proceedings of XXIV conference of the Russian school on the problems of science and technology, dedicated to the 80th anniversary of Acad. V.P. Serbin vol 2, pp 118–125

18.

Bykadorova OG, Shumyacher VM (2004) The mechanism of contact interaction of the abrasive grain and the treated surface during grinding. In: Proceedings of VIII All-Russian scientific-practical conference: modern technologies in mechanical engineering, Penza, pp 54–58

19.

Bykadorova OG, Shumyacher VM (2005) The role of the wear plat-form of tops of abrasive grains in the metal dispersed during grinding. In: Proceedings of III-rd international scientific and engineering conference: materials and technologies of the XXI century, Penza, pp 82–85

Titel: Intensification of Technical Grinding Modes by Managing Physical Processes of Chip Formation
verfasst von: O. G. Kulik
E. D. Illarionova
Verlag: Springer International Publishing
Buch: Proceedings of the 4th International Conference on Industrial Engineering
Print ISBN: 978-3-319-95629-9

Electronic ISBN: 978-3-319-95630-5

Copyright-Jahr: 2019
DOI: https://doi.org/10.1007/978-3-319-95630-5_155

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht