nach oben

Erschienen in:

2010 | OriginalPaper | Buchkapitel

Interfacial Burr Formation in Drilling of Stacked Aerospace Materials

verfasst von : S.N. Melkote, T.R. Newton, C. Hellstern, J.B. Morehouse, S. Turner

Erschienen in: Burrs - Analysis, Control and Removal

Verlag: Springer Berlin Heidelberg

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Interfacial burr formation during through-hole drilling in stacked aluminum sheets is a common problem in aircraft assembly operations. Burrs formed at the interface of the sheets are removed through non-value added de-stacking and deburring operations that increase the overall assembly time and costs. This paper presents experimental work aimed at understanding the impact of drilling parameters including drill geometry, cutting conditions, clamping configuration and drill wear on interfacial burr formation. Specific conclusions regarding the influence of these parameters on burr sizes and drilling forces are presented.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Hasegawa, Y., Zaima, S., Yuki, A., 1975, Burr in Drilling Aluminum and a Prevention of It, SME Technical Paper, MR75- 480.

Safronas, A., Taraman, K., 1976, Model Development for Exit Burr Thickness as a Function of Drill Geometry and Feed, SME Technical Paper, MR76-253.

Pande, S.S., Relekar, H.P., 1985, Investigations on Reducing Burr Formation in Drilling, International Journal of Machine Tool Design and Research, 26(3):339–348.CrossRef

Aurich, J.C., Sudermann, H., Bil, H., 2005, Characterization of Burr Formation in Grinding and Prospects for Modeling, Annals of CIRP, 54(1):313–316.CrossRef

Safronas, A., Spurgeon, W.M., Taraman, K., 1975, Reduction of Burr Formation in Drilling, SME Technical Paper, MR75-376.

Kim, J., Dornfeld, D.A., 2002, Development of an Analytical Model for Drilling Burr Formation in Ductile Materials, Transactions of the ASME, Journal of Manufacturing Science & Engineering, 124: 192–198.

Heisel, U., Luik, M., Eisseler, R., Schaal, M., 2005, Prediction of Parameters for the Burr Dimension in Short-Hole Drilling, Annals of CIRP, 54(1): 79–82.CrossRef

Toropov, A.A., Ko, S.L., 2006, A New Burr Formation Model for Orthogonal Cutting of Ductile Metals, Annals of CIRP, 55(1): 55–58.CrossRef

Park, I.W., Dornfeld, D.A., 2000, A Study of Burr Formation Processes Using the Finite Element Method: Part II—The Influences of Exit Angle, Rake Angle, and Backup Material on Burr Formation Processes, Journal of Engineering Materials and Technology, 122(2): 229–237.CrossRef

10.

Min, S., Dornfeld, D.A., Kim, J., Shyu, B., 2001, Finite Element Modeling of Burr Formation in Metal Cutting, Machining Science and Technology, 5(3): 307–322.CrossRef

11.

Saunders, L.K.L., 2003, A Finite Element Model of Exit Burrs for Drilling of Metals, Finite Elements in Analysis and Design, 40: 139–158.CrossRef

12.

Gillespie, L.K., Albright, R.K., Neal, B.J., 1976, Burrs Produced by Drilling, Bendix Corporation, Topical Report BDX-613- 1248.

13.

Guo, Y., Dornfeld, D.A., 1998, Finite Element Analysis of Drilling Burr Minimization with a Backup Material, Transactions of NAMRI/SME, 26: 207–212.

14.

Choi, J., Min, S., Dornfeld, D.A., Mahboob, A., Tzong, T., 2003, Modeling of Inter-Layer Gap Formation in Drilling of Multi-Layered Material, Proceedings of the 6th CIRP Workshop on Modeling of Machining, 19–20 May, McMaster University, Hamilton, Ontario.

15.

Choi, J., Min, S., Dornfeld, D.A., 2004, Finite Element Modeling of Burr Formation in Drilling of a Multi-Layered Material, Proceedings of 7th International Conference on DeBurring and Surface Finishing, 7–9 June, University of California, Berkely, CA.

16.

Kim, D., Ramulu, M., 2004, Drilling Process Optimization for Graphite/Bismaleimide-Titanium Alloy Stacks, Composite Structures, 63: 101–114.CrossRef

17.

Ramalu, M., Branson, T., Kim, D., 2001, A Study on the Drilling of Composite and Titanium Stacks, Composite Structures, 54: 67–77.CrossRef

18.

Sisco, T., 2003, Achieving “One Up Assembly” by Reduction of Interface Burr Height in Aluminum, Graphite, and Advanced Titanum/Graphite Hybrid (TiGr) Material, SAE Technical Paper Series, 2003-01-2896.

19.

Huang, M.-F., Lin, T.-R., 2004, Application of Grey-Taguchi Method to Optimize Drilling of Aluminum Alloy 6061 with Multiple Performance Characteristics, Materials Science and Technology, 20: 528–532.MathSciNetCrossRef

20.

Rivero A., Aramendi, G., Herranz, S., López de Lacalle, L.N., 2006, An Experimental Investigation of the Effect of Coatings and Cutting Parameters on the Dry Drilling Performance of Aluminum Alloys, International Journal of Advanced Manufacturing Technology, 28: 1–11.CrossRef

21.

Bahr, B., Mankad, T., 1999, Study of Drill Tool Geometry in High-Speed Drilling of Aluminum Sheet Metal, SAE Technical Paper Series, 1999-01-2295.

22.

Ko, S. L., Chang, J.E., 2003, Development of Drill Geometry for Burr Minimization in Drilling, Annals of CIRP, 52(1): 45–48.CrossRef

23.

http://www.clevelandblackoxide.com/what.aspx; accessed on 6 February, 2009.

24.

Newton, T.R., Morehouse, J., Melkote, S.N., Turner, S., 2007, An Experimental Study of Interfacial Burr Formation in Drilling of Stacked Aluminum Sheets, Transactions of NAMRI/SME, 36: 437–444.

25.

Kanai, M., Iwata, K., Fujii, S., Kanda, Y., 1978, Statistical Characteristics of Drill Wear and Drill Life for the Standardized Performance Tests, Annals of CIRP, 27: 61–66.

26.

Kinman, M.D., 1963, Precision Drilling with Standard Twist Drills, Machinery, 102(2633): 1014–1018.

Titel: Interfacial Burr Formation in Drilling of Stacked Aerospace Materials
verfasst von: S.N. Melkote
T.R. Newton
C. Hellstern
J.B. Morehouse
S. Turner
Verlag: Springer Berlin Heidelberg
Buch: Burrs - Analysis, Control and Removal
Print ISBN: 978-3-642-00567-1

Electronic ISBN: 978-3-642-00568-8

Copyright-Jahr: 2010
DOI: https://doi.org/10.1007/978-3-642-00568-8_10

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht