Skip to main content
Fachgebiete
Automobil + Motoren Bauwesen + Immobilien Business IT + Informatik Elektrotechnik + Elektronik Energie + Nachhaltigkeit Finance + Banking Management + Führung Marketing + Vertrieb Maschinenbau + Werkstoffe Versicherung + Risiko
DE
EN
Bücher
Zeitschriften
Themenseiten
Organisationspsychologie Projektmanagement Marketing Smart Manufacturing
Weitere Formate
Podcasts Webinare Technik Webinare Wirtschaft Kongresse Veranstaltungskalender Awards
Jetzt Einzelzugang starten
Zugang für Unternehmen
Referenzkunden
SLX-Digitalkonferenz: Zukunftswerkstatt 2024

Mehr Umsatz mit Top-Kontakten

Am 7. Mai erfahren Sie, wie Vertriebsteams Leadgenerierung, Leadnurturing und Leadstrategien effizient steuern können.
Erweiterte Suche
Anmelden
nach oben
Erschienen in:
Buchtitelbild

2019 | OriginalPaper | Buchkapitel

1. Introduction

verfasst von : Zujian Huang

Erschienen in: Application of Bamboo in Building Envelope

Verlag: Springer International Publishing

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config
loading …

Abstract

Bamboo has much potential in the construction industry in applications such as high-value utilization of bamboo forest resources and improvement of building performance. The research project ‘Application of Bamboo in Building Envelope’ defines typical industrial bamboo products and the building envelope, respectively, as the research subjects at the material and building levels. There are deficiencies in terms of the comprehensiveness of the materials objects, completeness of the material parameters, and systematicness of the research hierarchies among previous studies. In this chapter, the research status in terms of bamboo resources, industrial utilization and development of the product system, the application status in building industry are introduced in detail. A technical route following a progressive order of ‘property study—performance evaluation—performance optimization’ is designed, following an overall research objective of supporting the application of bamboo in building envelope.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 340 Zeitschriften

aus folgenden Fachgebieten:

  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Versicherung + Risiko




Jetzt Wissensvorsprung sichern!

Jetzt informieren
Nächstes Kapitel Model Study on the Application of Bamboo in Building Envelope
Fußnoten
1
In 1879, the Rivieres were the first to clear the distinction between the two basic forms of the bamboo rhizomes. They used the terms ‘caespitose’ or ‘clumping’ for ‘pachymorph,’ and ‘tracant,’ or ‘running’ for ‘leptomorph.’ In 1925, when McClure was living in China, he introduced the terms ‘monopodial’ and ‘sympodial,’ and later, when he was at the Smithsonian Institution in Washington, he developed the concept of ‘leptomorph’ and ‘paquimorph,’ respectively. Today the terms ‘leptomorph’ and ‘paquimorph’ are used in the Americas by the botanists and taxonomists, to represent and the terms ‘monopodial’ and ‘sympodial’ in Asia [1].
 
2
The leptomorph and pachymorph types have in common in the bamboo culm morphology, anatomical structure, and growth processes. But the two have differences in the number of chromosomes, which is 2n = 48 in the leptomorph type, and 2n = 72 in the pachymorph type. Bamboos with low multiple chromosomes are considered to be of the advanced type and those with high ones are of primitive type [1].
 
3
Some scholars consider the rhizome as the main stem of bamboo and the culm as a branch. Bamboo culms scattered over brush land are connected with one or some underground stems. But in the eyes of bamboo material researchers, bamboo culm is the main object of study [11]. The object of this book is the bamboo culm, which is the main part for material utilization.
 
4
The HAM model is a coupled model of heat, moisture, and air, and the coupling of air occurs only when there is a pressure difference between indoors and outdoors, so it is not considered in some models. The models that do not describe the air coupling are actually ‘coupled heat and moisture model,’ referred to as the HM model. In this project, the HM model is considered as a case of the HAM model, so they are collectively referred to as the HAM mode.
 
Literatur
1.
López OH (2003) Bamboo: the gift of the gods. O. Hidalgo-López, Bogotá
2.
Das M, Bhattacharya S, Singh P et al (2008) Bamboo taxonomy and diversity in the era of molecular markers. Adv Bot Res 47:225–268
3.
Austin R, Ueda K (1972) Bamboo. Weather Hill Publishing, New York
4.
Rao AN, Ramanatha Rao V, Williams JT (1998) Priority species of bamboo and rattan. International Network for Bamboo and Rattan (INBAR), Beijing
5.
Janssen JJA (1988) The importance of bamboo as a building material. In: Proceedings of the Third International Bamboo Workshop. Cochin, India, 14–18, November 1988, pp 235–241
6.
De Vos V (2010) Bamboo for exterior joinery: a research in material and market perspectives. B.Sc. thesis, University of Applied Sciences Van Hall Larenstein (Wageningen UR)
7.
Liese W (1985) Bamboos–biology, silvics, properties, utilization. Deutsche Gesellschaft für Technische Zusammenarbeit (GTZ) Schriftenreihe Nr. 180, TZ Verlagsges, Roßdorf
8.
Yiping L, Henley G (2010) Biodiversity in the bamboo forests: a policy prospective for long term sustainability. International Network for Bamboo and Rattan (INBAR). Working paper 59
9.
Liese W, Mende C (1969) Histometrische Untersuchungen uber den Aufbau der Spro-Bachse zweir Bambusarten. Holzforsch. Holzver-wert 21(5):113–117
10.
Grosser D, Liese W (1974) Verteilung der Leitbündel und Zellarten in Sproßachsen verschiedener Bambusarten. Holz als Roh- und Werkstoff 32:473–482
11.
Zhang QS, Jiang SX, Tang YY (2001) INBAR technical report no. 26—Industrial utilization on bamboo. International Network for Bamboo and Rattan (INBAR), Beijing
12.
Liese W (1998) INBAR technical report no. 18—The anatomy of bamboo culms. International Network for Bamboo and Rattan (INBAR), Beijing
13.
Li S, Fu S, Zeng QY et al (1995) Biomimicry of bamboo bast fiber with engineering composite materials. Mater Sci Eng 3(2):125–130
14.
Mitch D, Harries KA, Sharma B (2010) Characterization of splitting behavior of bamboo culms. J Mater Civ Eng 22(11):1195–1199CrossRef
15.
Prawirohatmodjo S (1988) Comparative strengths or green and air dry bamboo. In: Proceedings of the Third International Bamboo Workshop. Cochin, India, 14–18, November 1988, pp 218–222
16.
Sharma SN , Mehra ML (1970) Variation of specific gravity and tangential shrinkage in the wall thickness of Bamboo (Dendrocalamus strictus) and its possible influence on the trend of the shrinkage-moisture content characteristic. Indian For Bull 259(7)
17.
Kumar S, Dobriyal PB, Rao IVR et al (1988) Preservative treatment of bamboo for structural uses. In: Proceedings of the Third International Bamboo Workshop. Cochin, India, 14–18, November 1988, pp 199–206
18.
萧江华 (2010) 中国竹林经营学. 科学出版社 / Xiao JH (2010) Chinese bamboo forest management. Science Press
19.
Ganapathy PM, Zhu HM, Zoolagud SS et al (1999) INBAR technical report no. 12—Bamboo panel boards: a state-of-the-art review. International Network for Bamboo and Rattan (INBAR), Beijing, pp 3–45
20.
LY/T 1660-2006 (2006) 竹材人造板术语. 国家林业局, 北京 / LY/T 1660-2006 (2006) Standard terminology for bamboo-based panel. The State Forestry Administration of the People’s Republic of China, Beijing
21.
向仕龙, 蒋远舟 (2008) 非木材植物人造板(第2版). 中国林业出版社, 北京 / Xiang SL, Jiang YZ (2008) Non-wood plant based-panel, 2nd edn. China Forestry Publishing House, Beijing
22.
Sun YM, Huang ZJ, Pan W (2015) Manufacturing classification of bamboo and comparative study on several physical properties, especially considering the application in building envelope. In: Proceedings of the 31st International PLEA Conference, vol 651. Building Green Futures, Bologna, pp 1–9
23.
王衍, 钟丽丹, 王正良 (2012) 基于专利文献的我国竹产业发展分析. 浙江林业科技 32(4):67–73 / Wang Y, Zhong LD, Wang ZL (2012) Analysis on patent of bamboo industry in China. J Zhejiang For Sci Technol 32(4):67–73
24.
肖岩, 单波 (2013) 现代竹结构. 中国建筑工业出版社, 北京 / Xiao Y, Shan B (2013) GluBam structures. China Architecture & Building Press, Beijing
25.
Van der Lugt P, Vogtländer J, Brezet H (2008) INBAR technical report no. 30—Bamboo, a sustainable solution for Western Europe—design cases, LCAs and land-use. International Network for Bamboo and Rattan (INBAR), Beijing
26.
李晖, 朱一辛, 杨志斌 等 (2013) 我国竹材微观构造及竹纤维应用研究综述. 林业工程学报 27(3):1–5 / Li H, Zhu YX, Yang ZB et al (2013) Review on the studies of bamboo microstructure and bamboo fiber application in China. J For Eng 27(3):1–5
27.
吴秉岭, 余养伦, 齐锦秋 等 (2014) 竹束精细疏解与炭化处理对重组竹性能的影响. 南京林业大学学报 (自然科学版) 2014(6):115–120 / Wu BL., Yu YL, Qi JQ et al (2014) Effects of bamboo bundles treated with fine fluffing and carbonized treatment on the properties of bamboo scrimber. J Nanjing For Univ (Nat Sci Ed) 2014(6):115–120
28.
国家林业局知识产权研究中心 (2014) 木/竹重组材技术专利分析报告. 北京: 中国林业出版社 / Research Center of Intellectual Property Rights, the State Forestry Administration of the People’s Republic of China (2014) Analysis of wood/bamboo scrimber patents. China Forestry Publishing House, Beijing
29.
余养伦, 刘波, 于文吉 (2014) 重组竹新技术和新产品开发研究进展. 国际木业 2014(7):8–13 / Yu YL, Liu B, Yu WJ (2014) Research progress on the new technology and new product development of bamboo international scrimber. Wood Ind 2014(7):8–13
30.
肖忠平, 张苏俊, 束必清 (2013) 碳化重组竹在竹结构建筑中的应用. 林产工业 40(6):44–45 / Xiao ZP, Zhang SJ, Su BQ (2013) Application of carbonized glued laminated bamboo structure construction. China For Prod Ind 40(6):44–45
31.
王春霞, 崔立东, 刘浩阳 等 (2013) 重组竹冷压工艺的研究. 林业机械与木工设备 2013(12):17–19 /Wang CX, Cui LD, Liu HY et al (2013) Study on cold press technology for reconsolidated bamboo. For Mach Woodwork Equip 2013(12):17–19
32.
唐连成 (2012) 丛生竹(木)重组材制造及性能研究. 南京林业大学博士学位论文, / Tang LC (2012) Study on manufacturing and properties of strand woven bamboo (wood) lumber made of sympodial species. Doctoral thesis, Nanjing Forestry University
33.
安鑫 (2012) 丛生竹及其复合材料的白蚁防治技术研究. 中国林业科学研究院硕士学位论文 / An X (2012) Study on control techniques of termite for sympodial bamboo and composite materials. Master thesis, Chinese Academy of Forestry
34.
李任 (2014) 阻燃重组竹的制备工艺与燃烧特性研究. 浙江农林大学硕士学位论文 / Li R (2014) Preparation and combustion characteristics of flame retardant reconstituted bamboo. Master thesis, Zhejiang Agriculture and Forestry University
35.
王戈 (2003) 毛竹/杉木层积复合材料及其性能. 中国林业科学研究院博士学位论文 / Wang G (2003) Moso bamboo/Chinese fir laminated composite and its properties. Doctoral thesis, Chinese Academy of Forestry
36.
虞华强, 袁东, 张训亚 等 (2011) 竹木复合地板变形有限元模拟. 建筑材料学报 14(06):793–797 / Yu HQ, Yuan D, Zhang XY et al (2011) Finite element analysis on the deformation of bamboo-wood composite flooring. J Build Mater 14(06):793–797
37.
羡瑜, 李海栋, 邓健超 等 (2015) 竹塑复合材料的冲击韧性. 东北林业大学学报 43(04):101–103+136 / Xian Y, Li HD, Deng JC et al (2015) Impact toughness characterization of bamboo plastic composites. J Northeast For Univ 43(04):101–103+136
38.
李文燕, 张双保, 任文涵 等 (2014) 不同改性方法对竹塑复合材料拉伸性能的影响. 南京林业大学学报 (自然科学版) 38(03):115–119 / Li WY, Zhang SB, Ren WH et al (2014) Effects of different modifying treatments on tensile properties of bamboo-plastic composites. J Nanjing For Univ (Nat Sci Ed) 38(03):115–119
39.
Li H, Zhou GY, Zhang HY (2010) Research and utilization status of natural bamboo fiber. Adv Mater Res 159:236–241CrossRef
40.
蔡再生 (2004) 纤维化学与物理. 中国纺织出版社, 北京 / Cai ZS (2004) Fiber chemistry and physics. China Textile & Apparel Press, Beijing
41.
Wang YP, Wang G, Cheng HT et al (2010) Structures of natural bamboo fiber for textiles. Text Res J 80(1):334–343CrossRef
42.
Zakikhani P, Zahari R, Sultan MTH et al (2014) Extraction and preparation of bamboo fibre-reinforced composites. Mater Des 63:820–828CrossRef
43.
Khalil HPSA, Bhat IUH, Jawaid M et al (2012) Bamboo fibre reinforced biocomposites: a review. Mater Des 42:353–368CrossRef
44.
Yang L, Liu HB, Zhang DS et al (2011) Electron microscopy study on microstructure of bamboo charcoal. J Chin Electron Microsc Soc 30(2):137–142
45.
张文标 (2002) 竹炭·竹醋液的研究. 南京林业大学博士论文 / Zhang WB (2002) Study on the bamboo charcoal and bamboo vinegar. Doctoral thesis, Nanjing Forestry University
46.
Yoshinari K (2003) Apparatus and method for producing bamboo or wood charcoal. JP200368
47.
Isa SSM, Ramli MM, Hambali NAMA et al (2016) Adsorption properties and potential applications of bamboo charcoal: a review. MATEC Web Conf 2016(78):01097
48.
Wu G, Wu G, Zhang Q (2016) Adsorptive removal of p-nitroaniline from aqueous solution by bamboo charcoal: kinetics, isotherms, thermodynamics, and mechanisms. Desalin Water Treat 57(55):26448–26460CrossRef
49.
Meng ZL, Zhang YH, An Q et al (2013) Removal of organic pollutants in solution by bamboo charcoal. Adv Mater Res 699:554–556CrossRef
50.
Fujiwara S, Shima K, Chiba K (2003) Fundamental characteristics and humidity control capacity of bamboo charcoal. Mokuzai Gakkaishi 49(5):333–341
51.
Laohhasurayotin K, Pookboonmee S (2013) Multifunctional properties of Ag/TiO2/bamboo charcoal composites: preparation and examination through several characterization methods. Appl Surf Sci 282:236–244CrossRef
52.
Yang L, Liu HB, Zhang DS et al (2011) Microstructure of graphitized bamboo charcoal and preparation and properties of its composite. Chin J Nonferrous Met 21(3):648–655
53.
Liese W, Köhl M (2015) Bamboo: the plant and its use. Springer, New York
54.
Wei DS (2014) Bamboo inhabiting fungi and their damage to the substrate. Dissertation, Department of Biology, Hamburg University
55.
Wei DS, Schmidt O, Liese W (2013) Durability test of bamboo against fungi according to EN standards. Eur J Wood Wood Prod 71(5):551–556CrossRef
56.
魏洋, 吕清芳, 张齐生 等 (2009) 现代竹结构抗震安居房的设计与施工. 施工技术 38(11):52–54 / Wei Y, Lu QF, Zhang QS et al (2009) Design and construction of modern bamboo anti-seismic living room. Constr Technol 38(11):52–54
57.
肖岩 (2015) 现代竹结构: 以竹代木 现代科技重新唤起我们的竹情结. 城市环境设计 2015(Z1):164 / Xiao Y (2015) Modern bamboo structure: substitute wood with bamboo. Urban Environ Des 2015(Z1):164
58.
肖岩, 佘立永, 单波 等 (2009) 装配式竹结构房屋的设计与研究. 工业建筑 2009(01):56–59 / Xiao Y, She LY, Shan B et al (2009) Research and design of prefabricated bamboo house. Ind Constr 2009(01):56–59
59.
郝琳 (2010) 竹化未来. 动感 (生态城市与绿色建筑) 2010(4):80–89 / Hao L (2010) Contemporary bamboo construction for a green future. Eco-city Green Build 2010(4):80–89
60.
Steiger L (2011) Timber construction. 中国建筑工业出版社 / Steiger L (2011) Timber construction. China Architecture & Building Press
61.
Holzrahmenbau Bewährtes Hausbau-System 5 (2014) Auflage. Bruderverlag, Köln
62.
Velez S (2013) Grow your own house. Vitra Design Museum; Bilingual edn
63.
Dunkelberg K (2005) IL 31: bamboo—bamboo as a building material. Krämer Verlag, Stuttgart
64.
Janssen JJA (1991) Mechanical properties of bamboo. Springer
65.
Janssen JJA (1995) Bamboo in building structures, 2nd edn. Practical Action
66.
Janssen JJA (1995) Building with bamboo: a handbook. Practical Action
67.
Janssen JJA (2000) INBAR technical report no. 26—Designing and building with bamboo. International Network for Bamboo and Rattan (INBAR), Beijing
68.
Heinsdorff M (2011) Design with nature: the bamboo architecture. Hirmer Publishers; Blg Ltd edn
69.
张文福, 江泽慧, 王戈 等 (2013) 用环刚度法评价圆竹径向抗压力学性能. 北京林业大学学报 35(01):119–122 / Zhang WF, Jiang ZH, Wang G et al (2013) Radial compression mechanical properties of bamboo-culm by ring stiffness. J Beijing For Univ 35(01):119–122
70.
程海涛, 王戈, 王正 等 (2012) 太阳能圆竹预制房屋示范. 建设科技 2012(03):50–51 / Cheng HT, Wang G, Wang Z et al (2012) Prefabricated round bamboo solar house demonstration. Constr Sci Technol 2012(03):50–51
71.
高黎, 王正, 王戈 等 (2012) 原竹预制构件房屋设计与制造技术. 北京林业大学学报 34(05):153–156 / Gao L, Wang Z, Wang G et al (2012) Design and manufacture technology of prefabricated bamboo house. J Beijing For Univ 34(05):153–156
72.
Zhang JL, Du YF, Yan ZM et al (2012) Study on bonding properties of bamboo-steel interface under static load. Appl Mech Mater 166–169:176–179
73.
Yan ZM, Du YF, Huang JG et al (2013) Approach to steel-bamboo composite structure system. Appl Mech Mater 301(125):1263–1266CrossRef
74.
Li Y, Shen H, Shan W et al (2012) Flexural behavior of lightweight bamboo–steel composite slabs. Thin-Walled Struct 53(2):83–90CrossRef
75.
蒋天元 (2012) 钢-竹组合梁柱边节点抗震性能试验研究. 宁波大学硕士学位论文 / Jiang TY (2012) Anti-seismic performance test on steel-bamboo composite beam-column exterior joints. Master thesis, Ningbo University
76.
蒋天元, 李玉顺, 杜永飞 等 (2013) 钢竹组合墙体与钢竹组合楼板的节点结构: CN 203066261 U. 中国国家知识产权局发明专利 / Jiang TY, Li YS, Du YF et al (2013) A construction note of steel-bamboo composite wall and steel-bamboo composite floor: CN 203066261 U. Invention Patent of the National Intellectual Property Administration, PRC
77.
蒋天元, 李玉顺, 杜永飞 等 (2013) 钢竹组合梁与钢竹组合柱的节点结构: CN 203066254 U. 中国国家知识产权局发明专利 / Jiang TY, Li YS, Du YF et al (2013) A construction note of steel-bamboo composite beam and steel-bamboo composite column: CN 203066254 U. Invention Patent of the National Intellectual Property Administration, PRC
78.
单炜, 李玉顺, 柳俊哲 (2012) 箱形钢竹或钢木组合楼板: CN 101775863 B. 中国国家知识产权局发明专利 / Shan W, Li YS, Liu JZ (2012) A box steel or steel wood composite floor: CN 101775863 B. Invention Patent of the National Intellectual Property Administration, PRC
79.
Gijsbers R, Cox MGDM (2014) Structural strap connections for bamboo and wooden shelter frames. IFRC-SRU Cladding & Fixing Conference, 3–4 September 2014, Luxembourg
80.
Jorissen AJM, Voermans J, Jansen MH (2007) Glued-laminated bamboo: node and joint failure in bamboo laminations in tension. J Bamboo Rattan 6(3–4):137–144
81.
Gonzalez Beltran GE, Gutierrez JA, van Herwijnen F et al (2001) Selection criteria for a house design method using plybamboo sheets. J Bamboo Rattan 1(1):59–70CrossRef
82.
Sharma B, Gatoo A, Bock M et al (2015) Engineered bamboo: state of the art. Proc Inst Civ Eng: Constr Mater 168(2):57–67
83.
Archila HA, Brandon D, Ansell M et al (2014) Evaluation of the mechanical properties of cross laminated bamboo panels by digital image correlation and finite element modelling. World Conference on Timber Engineering (WCTE)
84.
Kumar A, Vlach T, Laiblova L et al (2016) Engineered bamboo scrimber: Influence of density on the mechanical and water absorption properties. Constr Build Mater 127:815–827CrossRef
85.
Sharma B, Gatóo A, Bock M et al (2015) Engineered bamboo for structural applications. Constr Build Mater 81:66–73CrossRef
86.
Alireza J (2017) Composite bamboo and its application as reinforcement in structural concrete. Dissertation, ETH Zurich
87.
Zhang P, Wu G, Zhu H et al (2014) Mechanical performance of the wet-bond interface between FRP plates and cast-in-place concrete. J Compos Constr 18(6):04014016CrossRef
88.
魏洋, 吴刚, 李国芬 等 (2014) 新型FRP-竹-混凝土组合梁的力学行为. 中南大学学报(自然科学版) 45(12):4384–4392 / Wei Y, Wu G, Li GF et al (2014) Mechanical behavior of novel FRP-bamboo-concrete composite beams. J Cent South Univ (Sci Technol) 45(12):4384–4392
89.
魏洋, 王晓伟, 李国芬 (2014) 配筋重组竹受弯试件力学性能试验. 复合材料学报 31(4):1030–1036 / Wei Y, Wang XW, Li GF (2014) Mechanical properties test of bamboo scrimber flexural specimens reinforced with bars. Acta Mater Compos Sin 31(4):1030–1036
90.
Xiao Y, Shan B, Yang RZ et al (2014) Glue laminated bamboo (GluBam) for structural applications. In: Materials and joints in timber structures. Springer, Netherlands, pp 589–601
91.
Xiao Y, Yang RZ, Shan B (2013) Production, environmental impact and mechanical properties of glubam. Constr Build Mater 44(3):765–773CrossRef
92.
Shan B, Chen J, Xiao Y (2012) Mechanical properties of glubam sheets after artificial accelerated aging. Key Eng Mater 517:43–50CrossRef
93.
Li Z, Xiao Y, Monti G et al (2016) Lightweight woodframe shear walls with ply-bamboo sheathings. Appl Mech Mater 847:529–536CrossRef
94.
肖岩, 佘立永, 单波 等 (2009) 现代竹结构在汶川地震灾后重建中的应用. 自然灾害学报 18(3):14–18 / Xiao Y, She YL, Shan B et al (2009) Application of modern bamboo structure to reconstruction after Wenchuan earthquake. J Nat Disasters 18(3):14–18
95.
Xiao Y, Ma J (2012) Fire simulation test and analysis of laminated bamboo frame building. Constr Build Mater 34(5):257–266CrossRef
96.
肖岩, 单波, 张达威 (2009) 竹材梁构件: CN 101775863 B. 中国国家知识产权局发明专利 / Xiao Y, Shan B, Zhang DW (2009) A bamboo beam member: CN 101775863 B. Invention Patent of the National Intellectual Property Administration, PRC
97.
肖岩, 黄靓 (2008) 一种使用竹材加固墙体的方法: CN 101215930 A. 中国国家知识产权局发明专利 / Xiao Y, Huang J (2008) A method of reinforcing wall using bamboo: CN 101215930 A. Invention Patent of the National Intellectual Property Administration, PRC
98.
肖岩, 单波, 佘立永 (2008) 一种快速装配式竹木板房: CN 101338622 B. 中国国家知识产权局发明专利 / Xiao Y, Shan B, She YL (2008) A fast-assembled bamboo panel house: CN 101338622 B. Invention Patent of the National Intellectual Property Administration, PRC
99.
肖岩, 黄政宇, 陈国 (2008) 竹材住宅建筑: CN 1963056 A. 中国国家知识产权局发明专利 / Xiao Y, Huang ZY, Chen G (2008) A bamboo residential building: CN 1963056 A. Invention Patent of the National Intellectual Property Administration, PRC
100.
Kim JS, Lee KH, Cho CH et al (2008) Micromorphological characteristics and lignin distribution in bamboo (Phyllostachys pubescens) degraded by the white rot fungus Lentinus edodes. Holzforsch 62(4):481–487CrossRef
101.
Schmidt G (2013) Ethiopian highland bamboo as raw material for industrial panel production: investigation on basic properties and raw material preparation. Masterarbeit, Hamburg: Univ Hamburg
102.
Malanit P, Barbu MC, Liese W et al (2010) Macroscopic aspects and physical properties of Dendrocalamus asper Backer for composite panels. World Bamboo Rattan 7(3–4):151–163
103.
Construction AIOT (2012) Timber construction manual, 6th edn. Wiley
104.
Grosser D (1971) Beitrag zur Histologie und Klassifikation asiatischer Bambusarten. Kommissionsverlag Buchhandlung Max Wiedebusch Hamburg
105.
Zou LH, Jin HLN, Lu WY (2009) Nanoscale structural and mechanical characterization of the cell wall of bamboo fibers. Mater Sci Eng, C 29:1375–1379CrossRef
106.
GB 50176-2016 (2016) 民用建筑热工设计规范. 中华人民共和国国家标准 / GB 50176-2016 (2016) Thermal design code for civil building. State Standard of the People’s Republic of China
107.
Huang P (2017) Hygrothermal performance of Moso bamboo based building material. Dissertation, University of Bath
108.
Wu SC, Yu SY, Han J et al (2004) Testing and analysis of the thermodynamics parameters of Phyllostachys edulis. J Cent South For Univ 24(5):70–75
109.
Huang P, Chang WS, Ansell MP et al (2015) Density distribution profile for internodes and nodes of Phyllostachys edulis, (Moso bamboo) by computer tomography scanning. Constr Build Mater 93:197–204CrossRef
110.
Huang P, Chang WS, Ansell MP et al (2017) Porosity estimation of Phyllostachys edulis (Moso bamboo) by computed tomography and backscattered electron imaging. Wood Sci Technol 51(1):11–27CrossRef
111.
Ohmae Y, Nakano T (2009) Water adsorption properties of bamboo in the longitudinal direction. Wood Sci Technol 43(5–6):415–422CrossRef
112.
Jiang ZH, Wang HK, Yu Y et al (2012) Hygroscopic behaviour of bamboo and its blocking units. J Nanjing For Univ 36(2):11–14
113.
Wang HK (2010) Study of the mechanism of moisture affecting the bamboo fiber cell walls and macroscopic mechanical behavior. Cent South Univ For Technol
114.
Huang P, Latif E, ChangW S et al (2017) Water vapour diffusion resistance factor of Phyllostachys edulis (Moso bamboo) [J]. Constr Build Mater 141(15):216–221CrossRef
115.
Huang P, Chang WS, Shea A et al (2013) Non-homogeneous Thermal Properties of bamboo. In: Aicher S, Reinhardt HW, Garrecht H (eds) Materials and joints in timber structures. Springer, Netherlands, pp 657–664
116.
Shah DU, Bock MCD, Mulligan H et al (2016) Thermal conductivity of engineered bamboo composites. J Mater Sci 51(6):2991–3002CrossRef
117.
Huang P, Zeidler A, Chang WS et al (2016) Specific heat capacity measurement of Phyllostachys edulis (Moso bamboo) by differential scanning calorimetry. Constr Build Mater 125:821–831CrossRef
118.
Huang P, Chang WS, Ansell M et al (2014) Heat transfer simulation and experimental studies of bamboo in radial direction. In: World Conference on Timber Engineering (WCTE), 2014-08-10–2014-08-14
119.
田慧敏, 蔡玉兰 (2008) 竹原纤维微观形态及聚集态结构的研究. 棉纺织技术 36(9):544–546 / Tian HM, Cai YL (2008) Research of nature bamboo fibre microstructure and aggregation state structure. Cotton Text Technol 36(9):544–546
120.
万玉芹, 吴丽莉, 俞建勇 (2004) 竹纤维吸湿性能研究. 纺织学报 25(3):14–16 / Wan YQ, Wu LL, Yu JY (2004) Research on hygroscopic property of the bamboo fiber. J Text Res 25(3):14–16
121.
赵春梅 (2010) 竹原纤维性能研究及其产品开发. 东华大学硕士学位论文 / Zhao CM (2010) Research on performance of natural bamboo fiber and product development. Master thesis, Donghua University
122.
Fei P, Xiong H, Cai J et al (2016) Enhanced the weatherability of bamboo fiber-based outdoor building decoration materials by rutile nano-TiO2. Constr Build Mater 114:307–316CrossRef
123.
Ouyang WJ, Hu WP, Yang XP (2012) On the application of bamboo fiber in home furnishing design. Adv Mater Res 460:244–248CrossRef
124.
姚文斌, 愈伟鹏, 张蔚 (2014) 一种麻形竹纤维的生产工艺: CN 102206873 B. 中国国家知识产权局发明专利 / Yao WB, Yu WP, Zhang W (2014) A production process of hemp bamboo fiber: CN 102206873 B. Invention Patent of the National Intellectual Property Administration, PRC
125.
Yao WB, Zhang W (2011) Research on manufacturing technology and application of natural bamboo fibre. In: International Conference on Intelligent Computation Technology and Automation. IEEE, pp 143–148
126.
魏书元 (2014) 一种竹纤维建筑保温材料: CN 103553423 A. 中国国家知识产权局发明专利 / Wei SY (2014) A bamboo fiber building insulation material: CN 103553423 A. Invention Patent of the National Intellectual Property Administration, PRC
127.
Defoirdt N, Biswas S, Vriese LD et al (2010) Assessment of the tensile properties of coir, bamboo and jute fibre. Compos A Appl Sci Manuf 41(5):588–595CrossRef
128.
Murphy RJ, Norton A (2008) Life cycle assessments of natural fibre insulation materials. Imperial College, London
129.
Hurtado PL, Rouilly A, Vandenbossche V et al (2016) A review on the properties of cellulose fibre insulation. Build Environ 96(1):170–177CrossRef
130.
Wei KC, Lv CL, Chen MZ et al (2015) Development and performance evaluation of a new thermal insulation material from rice straw using high frequency hot-pressing. Energy Build 87(1):116–122CrossRef
131.
Ali ME, Alabdulkarem A (2017) On thermal characteristics and microstructure of a new insulation material extracted from date palm trees surface fibers. Constr Build Mater 138(1):276–284CrossRef
132.
Oushabi A, Sair S, Abboud Y et al (2015) Natural thermal-insulation materials composed of renewable resources: characterization of local date palm fibers (LDPF). J Mater Environ Sci 6(12):3395–3402
133.
Alavez-Ramirez R, Chiñas-Castillo F, Morales-Dominguez VJ et al (2012) Thermal conductivity of coconut fibre filled ferrocement sandwich panels. Constr Build Mater 37:425–431CrossRef
134.
Manohar K, Adeyanju AA (2016) A comparison of banana fiber thermal insulation with conventional building thermal insulation. Br J Appl Sci Technol 17(3):1–9CrossRef
135.
Perino M, Volf M, Diviš J et al (2015) Thermal, moisture and biological behaviour of natural insulating materials. Energy Proc 78:1599–1604CrossRef
136.
Boukhattem L, Boumhaout M, Hamdi H et al (2017) Moisture content influence on the thermal conductivity of insulating building materials made from date palm fibers mesh. Constr Build Mater 148(1):811–823CrossRef
137.
Palumbo M, Lacasta AM, Holcroft N et al (2016) Determination of hygrothermal parameters of experimental and commercial bio-based insulation materials. Constr Build Mater 124(5):269–275CrossRef
138.
Holcroft N, Shea A (2013) Moisture buffering and latent heat effects in natural fibre insulation materials. Portugal SB13-Contribution of Sustainable Building to meet the EU, pp 221–228
139.
Liese W, Silbermann S (2012) Bamboo charcoal: properties and utilization. Newsl Bamboo Soc EBS 31(6):15–22
140.
周建斌 (2005) 竹炭环境效应及作用机理研究. 南京林业大学研究生博士学位论文 / Zhou JB (2005) Study on the mechanism of action and in environmental protection. Doctoral thesis, Nanjing Forestry University
141.
左宋林, 高尚愚, 徐柏森, 等 (2004) .炭化过程中竹材内部形态结构的变化. 林产化学与工业 24(4):56–60 / Zuo SL, Gao SY, Xu BS et al (2004) Change of inner morphological texture of bamboo during carbonization. Chem Ind For Prod 24(4):56–60
142.
卢克阳, 张齐生, 蒋身学 (2006) 竹炭吸湿性能的初步研究. 木材工业 20(3):20–22 / Lu KY, Zhang QS, Jiang SX (2006) A primary study of bamboo charcoal moisture absorption. China Wood Ind 20(3):20–22
143.
蒋正武, 张静娟, 曾志勇 等 (2016) 炭化工艺参数对竹炭调湿性能的影响研究. 建筑材料学报 09:1–8 / Jiang ZW, Zhang JJ, Zeng ZY et al (2016) Effect of carbonization process parameters on humidity-controlling properties of bamboo charcoal. J Build Mater 09:1–8
144.
Maki F, Norimoto M, Yamada T (1985) Humidity conditions in the house lined with wood based materials. Wood Res Tech Notes 21:87–95
145.
Ikeda T (1992) Moisture absorption and desorption characteristics and the effects of porous materials (inorganic porous material). Gypsum Lime 240:355–363
146.
李国胜 (2005) 海泡石矿物材料的显微结构与自调湿性能研究. 河北工业大学硕士学位论文 / Li GS (2005) Microstructure and self-humidity-control performance of mineral material sepiolite. Master thesis, Hebei University of Technology
147.
Qin MH, Belarbi R, Ait-Mokhtar A (2009) Simulation of coupled heat and moisture transfer in air-conditioned buildings. Autom Constr 18(5):642–631
148.
Ferreira C, Freitas VPD, Ramos NMM (2014) Quantifying the influence of hygroscopic materials in the fluctuation of relative humidity in museums housed in old buildings. In: 2014: 10th Nordic Symposium on Building Physics, Lund University, pp 600–607
149.
Erhardt D, Antretter F, Kilian R (2013) Measured and modeled influence of the moisture buffer effect in a historic stone church and its influence on possible HVAC measures. 11th REHVA world congress Clima 2013—Energy efficient, smart and healthy buildings, pp 4388–4397
150.
Yu DW, Tan HW, Ruan YJ (2011) A future bamboo-structure residential building prototype in China: life cycle assessment of energy use and carbon emission. Energy Build 43(10):2638–2646CrossRef
151.
Li NP, Long JB, Lin SU et al (2012) Experimental and theoretical study on thermal and moisture characteristics of new-type bamboo structure wall. J Cent South Univ (english version) 19(3):600–608CrossRef
152.
Wang Q, Li NP, Zeng DJ et al (2010) Coupled heat and moisture transfer in bamboo composite wall. Sci Technol Rev 28(17):87–90
153.
王倩 (2011) 新型竹材结构墙体热湿耦合迁移特性研究. 湖南大学硕士学位论文 / Wang Q (2011) The research on coupled heat and moisture transfer characteristics of bamboo structure wall. Master thesis, Hunan University
154.
李念平, 李炳华, 胡锦华 (2010) 建筑墙体霉菌生长特性模拟分析. 科技导报 28(15):41–44 / Li NP, Li BH, Hu JH (2010) Simulation of mold growth on building walls. Sci Technol Rev 28(15):41–44
155.
肖书博, 李念平, 李靖 等 (2008) 现代竹结构房屋室内空气品质的实测与研究. 安全与环境学报 8(6):87–90 / Xiao SB, Li NP, Li J et al (2008) Measurement and analysis of the indoor air quality of the modern bamboo house in China. J Saf Environ 8(6):87–90
156.
Li YS, Yao J, Li R et al (2017) Thermal and energy performance of a steel-bamboo composite wall structure. Energy Build 156:225–237CrossRef
157.
Geving S, Holme J (2010) The drying potential and risk for mold growth in compact wood frame roofs with built-in moisture. J Building Phys 33(3):249–269CrossRef
158.
Moonen P (2009) Continuous-discontinuous modelling of hygrothermal damage processes in porous media. Dissertation, LU Leuven
159.
Mertens S (2009) Hysteresis, damage and moisture effects in quasi-brittle porous materials. Dissertation, LU Leuven
160.
Mendes N, Winkelmann FC, Lamberts R et al (2003) Moisture effects on conduction loads. Energy Build 35(7):631–644CrossRef
161.
Zhang H, Yoshino H, Hasegawa K (2012) Assessing the moisture buffering performance of hygroscopic material by using experimental method. Build Environ 48(1):27–34CrossRef
162.
Abuku M, Janssen H, Roels S (2009) Impact of wind-driven rain on historic brick wall buildings in a moderately cold and humid climate: numerical analyses of mould growth risk, indoor climate and energy consumption. Energy Build 41(1):101–110CrossRef
163.
Glaser H (1959) Graphical method for investigation of diffusional process. Kalteteohnik 39(5):519–550
164.
Luikov AV (1975) Systems of differential equations of heat and mass transfer in capillary-porous bodies (review). Int J Heat Mass Transf 18(6):1–14CrossRefMATH
165.
Janssen H (2002) The influence of soil moisture transfer on building heat loss via the ground. Dissertation, LU Leuven
166.
Molenda CHA, Crausse P, Lemarchand D (1992) The influence of capillary hysteresis effects on the humidity and heat coupled transfer in a non-saturated porous medium. Int J Heat Mass Transf 35(6):1385–1396CrossRef
167.
Pedersen CR (1992) Prediction of moisture transfer in building constructions. Build Environ 27(3):387–397CrossRef
168.
Künzel HM (1995) Simultaneous heat and moisture transport in building components. Fraunhofer IRB Verlag, Stuttgart
169.
Häupl P, Grunewald J, Fechner H et al (1997) Coupled heat air and moisture transfer in building structures. Int J Heat Mass Transf 40(7):1633–1642CrossRefMATH
170.
Janssen H, Blocken B, Carmeliet J (2007) Conservative modelling of the moisture and heat transfer in building components under atmospheric excitation. Int J Heat Mass Transf 50(5–6):1128–1140CrossRefMATH
171.
Mendes N, Philippi PC (2005) A method for predicting heat and moisture transfer through multilayered walls based on temperature and moisture content gradients. Int J Heat Mass Transf 48(1):37–51CrossRefMATH
172.
Steeman HJ, Van Belleghem M, Janssens A et al (2009) Coupled simulation of heat and moisture transport in air and porous materials for the assessment of moisture related damage. Build Environ 44(10):2176–2184CrossRef
173.
Tariku F, Kumaran K, Fazio P (2010) Transient model for coupled heat, air and moisture transfer through multilayered porous media. Int J Heat Mass Transf 53(15–16):3035–3044CrossRefMATH
174.
Kumaran MK (1996) IEA Annex 24: heat, air and moisture transfer in insulated envelope parts. Final Report, vol 3, Task 3: Material Properties
175.
Woloszyn M, Rode C (2008) IEA Annex 41: whole building heat, air, moisture response. Subtask 1: modeling principles and common exercises. International Energy Agency, Executive committee on Energy Conservation in Buildings and Community Systems
176.
Janssen H (2014) Simulation efficiency and accuracy of different moisture transfer potentials. J Build Perform Simul 7:379–389CrossRef
177.
Van Belleghem M, Steeman M, Janssen H et al (2014) Validation of a coupled heat, vapour and liquid moisture transport model for porous materials implemented in CFD. Build Environ 81:340–353CrossRef
178.
Van De Walle W, Janssen H (2016) A thermal conductivity prediction model for porous building blocks. In: Proceedings of the CESBP Central European Symposium on Building Physics and Bausim 2016. Central European Symposium on Building Physics. Dresden, 14–16 September 2016, pp 67–74
179.
Defraeye T, Blocken B, Carmeliet J (2013) Influence of uncertainty in heat-moisture transport properties on convective drying of porous materials by numerical modelling. Chem Eng Res Des 91(1):36–42CrossRef
180.
Defraeye T (2011) Convective heat and mass transfer at exterior building surfaces. Dissertation, LU Leuven
181.
Parys W, Saelens D, Hens H (2011) Coupling of dynamic building simulation with stochastic modelling of occupant behaviour in offices—a review-based integrated methodology. J Build Perform Simul 4(4):339–358CrossRef
182.
Stephane Nouidui T, Nytsch-Geusen C, Holm A et al (2008) Object-oriented hygrothermal building physics library as a tool to predict and to ensure a thermal and hygric indoor comfort in building construction by using a Predicted-Mean-Vote (PMV) control ventilation system. 8th Nordic Symposium on Building Physics in the Nordic Countries 2008, Copenhagen, Denmark, pp 825–832
183.
Nytschgeusen C, Nouidui T, Holm A et al (2005) A hygrothermal building model based on the object-oriented modeling language Modelica. Ninth International IBPSA Conference, Montreal, Canada
184.
Deromea D, Kubilaya A, Defraeyea T et al (2017) Ten questions concerning modeling of wind-driven rain in the built environment. Build Environ 114:495–506CrossRef
185.
Van den Brande T, Blocken B, Roels S (2013) Rain water runoff from porous building facades: implementation and application of a first-order runoff model coupled to a HAM model. Build Environ 64:177–186CrossRef
186.
Peren J, van Hooff T, Leite B et al (2016) CFD simulation of wind-driven upward cross ventilation and its enhancement in long buildings: impact of single-span versus double-span leeward sawtooth roof and opening ratio. Build Environ 96:142–156CrossRef
187.
Kubilay A, Derome D, Blocken B et al (2015) Wind-driven rain on two parallel wide buildings: field measurements and CFD simulations. J Wind Eng Ind Aerodyn 146:11–28CrossRef
188.
Blocken B (2004) Wind-driven rain on buildings: measurements, numerical modelling and applications. Dissertation, LU Leuven
189.
Abuku M (2009) Moisture stress of wind-driven rain on building enclosures. Dissertation, LU Leuven
190.
Blocken B, Carmeliet J (2015) Impact, runoff and drying of wind-driven rain on a window glass surface: numerical modelling based on experimental validation. Build Environ 84:170–180CrossRef
191.
Abuku M, Janssen H, Poesen J et al (2009) Impact, absorption and evaporation of raindrops at building facades. Build Environ 44(1):113–124CrossRef
192.
Janssen H, Blocken B, Roels S et al (2007) Wind-driven rain as a boundary condition for HAM simulations: analysis of simplified modelling approaches. Build Environ 42(4):1555–1567CrossRef
193.
Briggen P, Blocken B, Schellen H (2009) Wind-driven rain on the facade of a monumental tower: Numerical simulation, full-scale validation and sensitivity analysis. Build Environ 44(8):1675–1690CrossRef
194.
Abuku M, Blocken B, Roels S (2009) Moisture response of building facades to wind-driven rain: field measurements compared with numerical simulations. J Wind Eng Ind Aerodyn 97(5–6):197–207CrossRef
195.
Islahuddin M, Janssen H (2017) Hygric property estimation of porous building materials with multiscale pore structures. Energy Proc 132:273–278CrossRef
196.
Islahuddin M, Janssen H (2016) Numerical estimation of isothermal moisture storage and transport properties. In: Grunewald J (ed) Proceedings of the Cesbp Central European Symposium on Building Physics and BauSIM 2016. Central European Symposium on Building Physics. Dresden, Germany, 14–16 September 2016, pp 301–308
197.
Todorovic J, Janssen H (2016) Impact of gypsum pore clogging on moisture transfer properties of bricks. In: Grunewald J (ed) Central European Symposium on Building Physics. Dresden, Germany, 14–16 September 2016
198.
Feng C, Janssen H (2016) Hygric properties of porous building materials (II): analysis of temperature influence. Build Environ 99:107–118CrossRef
199.
Feng C, Janssen H, Feng Y et al (2015) Hygric properties of porous building materials: analysis of measurement repeatability and reproducibility. Build Environ 85:160–172CrossRef
200.
Feng C, Janssen H (2017) The influence of temperature on the capillary absorption coefficient—a confrontation of two recent papers in building and environment. Build Environ 116:257–258CrossRef
201.
Janssen H, Scheffler G, Plagge R (2016) Experimental study of dynamic effects in moisture transfer in building materials. Int J Heat Mass Transf 98:141–149CrossRef
202.
Vereecken E, Roels S (2013) Hygric performance of a massive masonry wall: How do the mortar joints influence the moisture flux. Constr Build Mater 41:697–707CrossRef
203.
Montazeri H, Blocken B (2017) New generalized expressions for forced convective heat transfer coefficients at building facades and roofs. Build Environ 119:153–168CrossRef
204.
Deconinck A, Roels S (2016) Comparison of characterisation methods determining the thermal resistance of building components from onsite measurements. Energy Build 130:309–320CrossRef
205.
Reynders G, Diriken J, Saelens D (2017) Generic characterization method for energy flexibility: applied to structural thermal storage in residential buildings. Appl Energy 198:192–202CrossRef
206.
Van Belleghem M, Steeman HJ, Steeman M et al (2010) Sensitivity analysis of CFD coupled non-isothermal heat and moisture modelling. Build Environ 45(11):2485–2496CrossRef
207.
Delgado JMPQ, Barreira E, Ramos NMM et al (2013) Hygrothermal numerical simulation tools applied to building physics. Springer
208.
Palumbo M, Lacasta AM, Holcroft N et al (2016) Determination of hygrothermal parameters of experimental and commercial bio-based insulation materials. Constr Build Mater 124:269–275CrossRef
209.
Palumbo M, McGregor F, Heath A et al (2016) The influence of two crop by-products on the hygrothermal properties of earth plasters. Build Environ 105:245–252CrossRef
210.
Barclay M, Holcroft N, Shea A (2014) Methods to determine whole building hygrothermal performance of hemp-lime buildings. Build Environ 80:204–212CrossRef
211.
Shea AD, Wall K, Walker P (2013) Evaluation of the thermal performance of an innovative prefabricated natural plant fibre building system. Build Serv Eng Res Technol 34(4):369–380CrossRef
212.
Shea A, Lawrence M, Walker P (2012) Hygrothermal performance of an experimental hemp-lime building. Constr Build Mater 36:270–275CrossRef
213.
Lawrence R, Walker P, Latif E et al (2016) In situ assessment of the fabric and energy performance of five conventional and non-conventional wall systems using comparative coheating tests. Build Environ 109:68–81CrossRef
214.
Walker P, Thomson A, Maskell D (2017) Nonwood biobased materials: straw. In: Jones D, Brischke C (eds) Performance of bio-based building materials, 1st edn. Woodhead Publishing, Duxford, pp 112–119
215.
Langmans J, Versele A, Roels S (2014) On the hygrothermal performance of straw bale wall elements in Belgium. International Conference on Sustainability in Energy and Buildings. Sustainability in Energy and Buildings. Cardiff, 25–27 June 2014
216.
Maskell D, Church M, Thomson A et al (2017) Development of a bio-based plasterboard. International Conference on Bio-Based Building Materials, France, 21 June 2017 to 23 June 2017
217.
Dubois S, McGregor F, Evrard A et al (2014) An inverse modelling approach to estimate the hygric parameters of clay-based masonry during a Moisture Buffer Value test. Build Environ 81:192–203CrossRef
218.
Latif E, Lawrence R, Shea A et al (2015) Moisture buffer potential of experimental wall assemblies incorporating formulated hemp-lime. Build Environ 93(2):199–209CrossRef
219.
Silva CFD, Stefanowski B, Maskell D et al (2017) Improvement of indoor air quality by MDF panels containing walnut shells. Build Environ 123:427–436CrossRef
220.
Zillig W (2009) Moisture transport in wood using a multiscale approach. Dissertation, LU Leuven
221.
Langmans J, Klein R, Roels S (2013) Numerical and experimental investigation of the hygrothermal response of timber frame walls with an exterior air barrier. J Building Phys 36(4):375–397CrossRef
222.
Langmans J, Klein R, Roels S (2011) Hygrothermal response of highly insulated timber frame walls with an exterior air barrier system: laboratory investigation. 9th Nordic Symposium on Building Physics, Tampere University of Technology
223.
Vanpachtenbeke M, Langmans J, Van den Bulcke J et al (2017) Hygrothermal behaviour of timber frame walls finished with a brick veneer cladding. Nordic Symposium on Building Physics. Trondheim, Norway, 11–14 June 2017, pp 1–6
224.
McGregor F, Heath A, Maskell D et al (2016) A review on the buffering capacity of earth building materials. Proc Inst Civ Eng: Constr Mater 169(5):241–251
225.
James C, Simonson C, Talukdar P et al (2010) Numerical and experimental data set for benchmarking hygroscopic buffering models. Int J Heat Mass Transf 53(19–20):3638–3654CrossRef
226.
Vereecken E, Roels S, Janssen H (2011) In situ determination of the moisture buffer potential of room enclosures. J Building Phys 34(3):223–246CrossRef
227.
Roels S, Talukdar P, James C et al (2010) Reliability of material data measurements for hygroscopic buffering. Int J Heat Mass Transf 53(23–24):5355–5363CrossRef
228.
McGregor F, Heath A, Fodde E et al (2014) Conditions affecting the moisture buffering measurement performed on compressed earth blocks. Build Environ 75:11–18CrossRef
229.
Mcgregor F, Heath A, Shea A et al (2014) The moisture buffering capacity of unfired clay masonry. Build Environ 82:599–607CrossRef
230.
Vereecken E, Vanoirbeek K, Roels S (2015) Towards a more thoughtful use of mould prediction models: a critical view on experimental mould growth research. J Building Phys 39(2):102–123CrossRef
231.
Vereecken E, Saelens D, Roels S (2011) A comparison of different mould prediction models. In: Proceedings of the 12th International Conference of the International Building Performance Simulation Association. BS 2011. Sydney, Australia, 14–16 November 2011, pp 1934–1941
232.
Vereecken E, Roels S (2014) Mould risk assessment fot thermal bridges: what is the impact of the mould prediction model. In: XIII International Conference on Durability of Building Materials and Components. International Conference on Durability of Building Materials and Components. Sao Paulo, 02–05 September 2014, pp 616–623
233.
Vanpachtenbeke M, Van den Bulcke J, De Windt I et al (2017) An experimental study of mould growth and wood decay in timber frame walls. International Research Group on Wood Protection. Gent, 4–8 June 2017
234.
Vanpachtenbeke M, Van den Bulcke J, De Windt I et al (2016) An experimental set-up to study mould growth and wood decay under dynamic boundary conditions. WCTE 2016 World Conference on Timber Emgineering. World Conference on Timber Engineering. Vienna, Austria, 22–25 August 2016, pp 1589–1597
235.
陈友明, 王盛卫, 张泠 (2004) 系统辨识在建筑热湿过程中的应用. 中国建筑工业出版社 / Chen YM, Wang SW, Zhang L (2004) Application of system identification in building heat and moisture process. China Architecture & Building Press
236.
陈友明, 王盛卫 (2004) 建筑围护结构非稳定传热分析新方法. 科学出版社 / Chen YM, Wang SW (2004) New method for unsteady heat transfer analysis of building envelope. Science Press
237.
陈友明, 周娟, 左政 (2003) 用频域回归方法计算墙体周期反应系数. 建筑热能通风空调 22(1):8–10 / Chen YM, Zhou J, Zuo Z (2003) Calculating wall periodic response factors using frequency-domain regression method. Build Energy Environ 22(1):8–10
238.
Guo XG, Chen YM, Deng YQ (2012) Development and experimental validation of a one-dimensional dynamic hygrothermal modeling based on air humidity ratio. J Cent South Univ 19(3):703–708CrossRef
239.
张乐, 陈友明 (2010) 太阳辐射对南方多层墙体热湿性能影响的研究. 建筑科学 26(10):332–336 / Zhang L, Chen YM (2010) Study on the influence of solar radiation on the thermal and hygric performance of multi-layer walls in South China. Build Sci 26(10):332–336
240.
孟庆林 (2003) 屋面含湿砂层温度波衰减研究. 暖通空调 33(2):110–111 / Meng QL (2003) Study on temperature wave decaying of wet sand layer of roof. Heating Ventilating Air Conditioning 33(2):110–111
241.
张玉, 孟庆林, 陈渊睿 (2008) 动态热湿气候风洞实验台的研制. 华南理工大学学报 (自然科学版) 36(3):99–103 / Zhang Y, Meng QL, Chen YR (2008) Development of dynamic laboratory of hot-humid climate wind tunnel. J South China Univ Technol (Nat Sci Ed) 36(3):99–103
242.
Zhang L, Feng Y, Meng Q et al (2015) Experimental study on the building evaporative cooling by using the Climatic Wind Tunnel. Energy Build 104:360–368CrossRef
243.
孟庆林 (2001) 建筑表面被动蒸发冷却. 华南理工大学出版社 / Meng QL (2001) Passive evaporative cooling of building surfaces. South China University of Technology Press
244.
孟庆林, 陈启高, 冉茂裕 等 (1999) 关于蒸发换热系数he的证明. 太阳能学报 20(2):216–219 / Meng QL, Chen QG, Ran MY et al (1999) Derivation of the vaporising heat transfer coefficient he. Acta Energiae Solaris Sin 20(2):216–219
245.
张明杰, 秦孟昊, 陈智 (2016) 复合相变调湿材料对室内热湿环境影响的研究. 建筑科学 32(12):72–79 / Zhang MJ, Qing MH, Chen Z (2016) Study on impact of composite phase change moisture-controlled materials on indoor thermal and humid environment. Build Sci 32(12):72–79
246.
刘奕彪, 秦孟昊 (2015) 多孔调湿材料湿缓冲特性的实验研究. 土木建筑与环境工程 2015(5):129–134 / Liu YB, Qing MH (2015) Experimental analysis of the moisture buffering properties of different porous hygroscopic materials. J Civ Archit Environ Eng 2015(5):129–134
247.
Chen Z, Qin M, Yang J (2015) Synthesis and characteristics of hygroscopic phase change material: composite microencapsulated phase change material (MPCM) and diatomite. Energy Build 106:175–182CrossRef
248.
Qin M, Zhang H (2015) Analytical methods to calculate combined heat and moisture transfer in porous building materials under different boundary conditions. Sci Technol Built Environ 21(7):993–1001CrossRef
249.
Wang Y, Liu Y, Wang D et al (2016) The correction coefficients for the building air-conditioning load accounting for the whole building hygrothermal transfer process for major cities in China. Indoor Built Environ 26(5):642–661CrossRef
250.
陈飞, 刘艳峰, 马超 等 (2017) 湿迁移对围护结构传热系数地域差异性影响研究. 建筑热能通风空调 36(1):6–11 / Chen F, Liu YF, Ma C et al (2017) Influence of moisture transfer on building enclosure’s heat transfer coefficient among regional differences. Build Energy Environ 36(1):6–11
251.
李哲伟 (2014) 莫高窟洞窟前室对窟内热湿环境调控机理研究. 西安建筑科技大学硕士学位论文 / Li ZW (2014) Study on the atria regulatory mechanism of thermal and moisture environment in the Mogao grottoes. Master thesis, Xi’an University of Architecture and Technology
252.
樊夏玮, 闫增峰, 尚瑞华 等 (2016) 敦煌莫高窟区室外下垫面温湿度现场实测研究. 建筑与文化 2016(11):145–146 / Fan XW, Yan ZF, Shang RH et al (2016) Contrast and analysis of Dunhuang Mogao Grottoes Area Outdoor underlying surface temperature and humidity. Archit Cult 2016(11):145–146
253.
马斌齐, 闫增峰, 尚建丽 等 (2007) 被动式调湿建筑材料的开发与应用研究. 建筑科学 23(8):72–75 / Ma BQ, Yan ZF, Shang JL et al (2007) Research on development and application of passive humidity controlling materials. Build Sci 23(8):72–75
254.
闫增峰, 林海燕, 周辉 等 (2007) 建筑围护结构中热桥稳态传热计算研究. 暖通空调 37(7):11–14 / Yan ZF, Lin HY, Zhou H et al (2007) Research on steady-state heat transfer calculation of thermal bridge in building envelopes. Heating Ventilating Air Conditioning 37(7):11–14
255.
尚建丽, 宋冬毅, 麻向龙 等 (2016) 建筑石膏复合材料的调温调湿性能研究. 西安建筑科技大学学报 (自然科学版) 48(4):601–605 / Shang JL, Song DY, Ma XL et al (2016) Study on properties of temperature controlling and humidity controlling of gypsum compound materials. J Xi’an Univ Archit Technol (Nat Sci Ed) 48(4):601–605
256.
尚建丽, 张浩 (2016) 癸酸-棕榈酸/SiO2相变储湿复合材料的制备与表征. 复合材料学报 33(2):341–349 / Shang JL, Zhang H (2016) Preparation and characterization of decanoic acid-palmitic acid/SiO2 phase change and humidity storage composites. Acta Mater Compos Sin 33(2):341–349
257.
孔凡红, 赵强, 郭小强 等 (2016) 建筑材料多孔介质热物性参数测试实验研究. 太阳能学报, 2016(11):2883–2888 / Kong FH, Zhao Q, Guo XQ et al (2016) Study on test experiment of thermal physical parameters of building porous medium material. Acta Energiae Solaris Sin 2016(11):2883–2888
258.
Zhang H, Yoshino H, Iwamae A et al (2015) Investigating simultaneous transport of heat and moisture in hygroscopic materials by a semi-conjugate CFD-coupled approach. Build Environ 90:125–135CrossRef
259.
史路阳, 刘京, 张会波 (201) 稻草板与常见建筑材料调湿特性对比实验. 建筑科学 33(2):42–46 / Shi LY, Liu J, Zhang HB (2017) Experiments for comparing the hygroscopicity of straw panel with other hygroscopic building materials. Build Sci 33(2):42-46
260.
韩星, 陈秋火 (2014) MgO板的吸湿性能实验及在建筑环境中的调湿效果. 全国暖通空调制冷2014年学术文集 2014:180–183 / Han X, Chen QH (2014) Moisture absorption performance of MgO board and its humidity control effect in building environment. Heating Ventilating Air Conditioning 2014(S):180–183
261.
Liu X, Chen Y, Ge H et al (2015) Determination of optimum insulation thickness for building walls with moisture transfer in hot summer and cold winter zone of China. Energy Build 109(4):361–368CrossRef
262.
张景欣, 郭兴国, 陈友明 等 (2015) 墙体内热湿耦合过程的时域递归展开算法. 土木建筑与环境工程 2015(6):147–152 / Zhang JX, Guo XG, Chen YM et al (2015) A time domain recursive algorithm for solving the model of coupled heat and moisture transfer in building wall. J Chongqing Jianzhu Univ 2015(6):147–152
263.
郭兴国, 陈友明, 陈国杰 等 (2014) 热湿气候地区湿传递对吸放湿墙体热湿性能的影响. 建筑技术 45(8):747–750 / Guo XG, Chen YM, Chen GJ et al (2014) Effect of moisture transfer on hydrothermal performance of multilayer wall subjected to hot humid climate. Archit Technol 45(8):747–750
264.
邓小飞, 徐瑾, 李丽 (2017) 佛甲草绿化屋面的隔热和降温增湿效应研究——以广州市羊城创意产业园屋顶为例. 西北林学院学报 32(4):279–282 / Deng XF, Xu J, Li L (2017) Thermal insulation, temperature-lowering and humidity-promotion effects of sedum lineare green roof: a case study of Yangcheng creative industrial park. J Northwest For Univ 32(4):279–282
265.
Feng C, Janssen H, Feng Y et al (2014) Experimental analysis of the repeatability of vacuum saturation and capillary absorption tests. Nordic Symposium on Building Physics. Lund, Sweden, pp 394–401
266.
冯驰, 冯雅, 孟庆林 (2013) 加气混凝土蒸汽渗透系数的变物性取值方法. 土木建筑与环境工程 35(5):132–136 / Feng C, Feng Y, Meng QL (2013) Approach to determine value of variable vapor permeability of autoclaved aerated concrete. J Chongqing Jianzhu Univ 35(5):132–136
267.
钟辉智, 雷波, 冯雅 (2010) 多孔材料湿扩散系数研究情况. 建筑环境科学与技术国际学术会议, 2010:842–847 / Zhong HZ, Lei B, Feng Y (2010) Study on the moisture diffusion coefficient. International Conference on Building Environmental Science and Technology, pp 842–847
268.
南艳丽, 冯雅, 谷晋川 等 (2007) 建筑热桥的数值模拟与实验研究. 低温建筑技术 2007(3):110–111 / Nan YL, Feng Y, Gu JC et al (2007) Numerical simulation and experiment study on thermal bridge structure. Low Temp Archit Technol 2007(3):110–111
269.
高庆龙, 杨柳, 刘大龙 等 (2007) 建筑热环境模拟分析用逐时相对湿度生成方法. 四川建筑科学研究 33(6):203–206 / Gao QL, Yang L, Liu DL et al (2007) The method of getting hourly relative humidity for building thermal condition simulation. Sichuan Build Sci 33(6):203–206
270.
王晓欢, 费本华, 王永兵 (2013) 木框架外墙保温性能试验研究. 木材加工机械 2013(6):11–15 / Wang XH, Fei BH, Wang YB (2013) Field testing of insulation performance of wood-frame external wall. Wood Process Mach 2013(6):11–15
271.
冉茂宇, 曹学功 (2001) 周期性热湿作用下多孔吸湿体吸解湿性能的实验研究. 西安建筑科技大学学报 (自然科学版) 33(4):313–315 / Ran ZM, Cao XG (2001) Tentative study on adsorption-desorption characteristics of porous adsorbent under periodic heat and moisture impulsion. J Xi’an Univ Archit Technol (Nat Sci Ed) 33(4):313–315
272.
王莹莹 (2013) 围护结构湿迁移对室内热环境及空调负荷影响关系研究. 西安建筑科技大学博士学位论文 / Wang YY (2013) Research on the effect of the palisade structure moisture transfer on the indoor thermal environment and air-conditioning load. Doctoral thesis, Xi’an University of Architecture and Technology
273.
陈国杰, 刘向伟, 陈友明 等 (2013) 多孔介质墙体热湿耦合迁移实验方法. 南华大学学报 (自然科学版) 2013(4):90–95 / Chen GJ, Liu XW, Chen YM et al (2013) Experimental method for coupled heat and moisture transfer in porous building envelope. J Univ South China (Sci Technol) 2013(4):90–95
274.
李玮, 刘芳, 陈宝明 等 (2017) 湿传递对建筑墙体传热性能的影响. 建筑节能 2017(1):57–61 / Liu W, Liu F, Chen BM et al (2017) Moisture transfer effects on heat transfer performance of building wall. Build Energy Effi 2017(1):57–61
275.
李魁山, 张旭, 韩星 等 (2009) 建筑材料等温吸放湿曲线性能实验研究. 建筑材料学报 12(1):81–84 / Li KS, Zhang X, Han X et al (2009) Experimental research of isothermal sorption curve of building materials. J Build Mater 12(1):81–84
276.
李魁山, 张旭, 韩星 等 (2009) 建筑材料水蒸气渗透系数实验研究. 建筑材料学报 12(3):288–291 / Li KS, Zhang X, Han X et al (2009) Experimental research of water vapor permeability through building materials. J Build Mater 12(3):288–291
277.
李魁山, 张旭, 高军 (2009) 周期性边界条件下多层墙体内热湿耦合迁移. 同济大学学报 (自然科学版) 37(6):814–818 / Li KS, Zhang X, Gao J (2009) Coupled heat and moisture transfer in multi-wall under periodic boundary conditions. J Tongji Univ (Nat Sci) 37(6):814–818
Metadaten
Titel
Introduction
verfasst von
Zujian Huang
Copyright-Jahr
2019
Buch
Application of Bamboo in Building Envelope

Print ISBN: 978-3-030-12031-3

Electronic ISBN: 978-3-030-12032-0

Copyright-Jahr: 2019

DOI
https://doi.org/10.1007/978-3-030-12032-0_1