nach oben

Erschienen in:

2020 | OriginalPaper | Buchkapitel

1. Introduction

verfasst von : Sanjay Kumar

Erschienen in: Additive Manufacturing Processes

Verlag: Springer International Publishing

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Additive manufacturing (AM), a concept existing for the last 10,000 years, is defined and positioned among other manufacturing processes. The role of tools to separate processes is given. Its main difference from machining is highlighted, and the relation between its complexity and cost is visited. It is classified into two major categories: additive layer manufacturing and additive non-layer manufacturing. Various AM processes are summarized with few lines each, which will provide a quick glimpse into all AM processes. The roles of various processes in processing metals, ceramics, polymers, composites and functionally graded materials are succinctly mentioned.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Nächstes Kapitel Classification

ASTM F2792-12a (2012) Standard terminology for additive manufacturing technologies (withdrawn 2015). ASTM International, West Conschohocken

Baumers M, Tuck C, Hague R (2015) Selective heat sintering versus laser sintering: comparison of deposition rate, process energy consumption and cost performance. In: SFF proceedings, pp 109–121

Bourell DL, Beaman JJ (2003) Chronology and current processes for freeform fabrication. J Jpn Soc Powder Metall 50(11):981–991CrossRef

Boyle BM, Xiong PT, Mensch TE et al (2019) 3D printing using powder melt extrusion. Addit Manuf 29:100811

Brenken B, Barocio E, Favaloro A et al (2018) Fused filament fabrication of fiber-reinforced polymers: a review. Addit Manuf 21:1–16

Brown R, Morgan CT, Majweski CE (2018) Not just nylon—improving the range of materials for high speed sintering. In: SFF proceedings, pp 1487–1498

Bryant FD, Sui G, Leu MC (2003) A study on effects of process parameters in rapid freeze prototyping. Rapid Prototyp J 9(1):19–23CrossRef

Buls S, Vleugels J, Hooreweder BV (2018) Microwave assisted selective laser melting of technical ceramics. In: SFF proceedings, pp 2349–2357

Button ST (2014) Introduction to advanced forming technologies. Compr Mater Process 3:1–5. Elsevier

Camacho DD, Clayton P, O’Brien WJ et al (2018) Applications of additive manufacturing in the construction industry- a forward-looking view. Autom Constr 89:110–119CrossRef

Chao Y, Qi L, Xiao Y et al (2012) Manufacturing of micro thin-walled metal parts by micro-droplet deposition. J Mater Process Technol 212(2):484–491CrossRef

Chen Y, Zhou C, Lao J (2011) A layerless additive manufacturing process based on CNC accumulation. Rapid Prototyp J 17(3):218–227CrossRef

Cordero ZC, Meyer HM III, Nandwana P, Dehoff RR (2017) Powder bed charging during electron-beam additive manufacturing. Acta Mater 124:437–445CrossRef

Cunningham CR, Flynn JM, Shokrani A et al (2018) Invited review article: strategies and processes for high quality wire arc additive manufacturing. Addit Manuf 22:672–686

Derby B (2015) Additive manufacturing of ceramic components by ink jet printing. Engineering 1(1):113–123CrossRef

Dutt S, Gupta AK, Singh M et al (2019) Climate variability and evolution of the Indus civilization. Quat Int 507:15–23CrossRef

Enneti RK, Prough KC, Wolfe TA et al (2018) Sintering of WC-12%Co processed by binder jet 3D printing (BJ3DP) technology. Int J Refract Met Hard Mater 71:28–35CrossRef

Feng Y, Zhan B, He J, Wang K (2018) The double-wire feed and plasma arc additive manufacturing process for deposition in Cr-Ni stainless steel. J Mater Process Technol 259:206–215CrossRef

Fox J, Beuth J (2013) Process mapping of transient melt pool response in wire feed e-beam additive manufacturing of Ti-6Al-4V. In: SFF proceedings, pp 675–683

Friedman T (2013) When complexity is free. The New York Times

Gallet Y, Genevey A, Goff ML et al (2006) Possible impact of the Earth’s magnetic field on the history of ancient civilizations. Earth Planet Sci Lett 246(1–2):17–26CrossRef

Goh GL, Agarwala S, Tan YJ, Yeong WY (2018) A low cost and flexible carbon nanotube pH sensor fabricated using aerosol jet technology for live cell applications. Sensors Actuators B Chem 260:227–235CrossRef

Gong X, Anderson T, Chou K (2014) Review on powder-based electron beam additive manufacturing technology. Manuf Rev 1(2):1–12

Grasso M, Colosimo BM (2017) Process defects and insitu monitoring methods in metal powder bed fusion: a review. Meas Sci Technol 28:044005CrossRef

Hafkamp T, Baars GV, Jager BD, Etman P (2017) A trade-off analysis of recoating methods for vat photopolymerization of ceramics. In: SFF proceedings, vol 28, pp 687–711

Hagen D, Kovar D, Beaman JJ (2018) Effects of electric field on selective laser sintering of yttria-stabilized zirconia ceramic powder. In: SFF symposium proceedings, pp 909–913

Hagen D, Chen A, Beaman JJ, Kovar D (2019) Selective laser flash sintering of yttria-stabilized zirconia. In: SFF symposium proceedings

Harrer W, Schwentenwein M, Lube T, Danzer R (2017) Fractography of zirconia-specimens made using additive manufacturing (LCM) technology. J Eur Ceram Soc 37:4331–4338CrossRef

Hartmann D (2015) Complexity is free. Lulu Publishing Services

Holt N, Horn AV, Montazeri M, Zhou W (2018) Microheater array powder sintering: a novel additive manufacturing process. J Manuf Process 31:536–551CrossRef

Janusziewicz R, Tumbleston JR, Quintanilla AL et al (2016) Layerless fabrication with continuous liquid interface production. PNAS 11(42):11703–11708CrossRef

Jerby E, Meir Y, Salzberg A et al (2015) Incremental metal-powder solidification by localized microwave-heating and its potential for additive manufacturing. Addit Manuf 6:53–66

Johannes SJ, Keicher DM, Lavin JM et al (2018) Multimaterial aerosol jet printing of passive circuit elements. In: SFF symposium proceedings, pp 473–478

Kamraj A, Lewis S, Sundaram M (2016) Numerical study of localized electrochemical deposition for micro electrochemical additive manufacturing. Procedia CIRP 42:788–792CrossRef

Karapatis NP, Van Griethuysen JPS, Glardon R (1998) Direct rapid tooling: a review of current research. Rapid Prototyp J 4(2):77–89CrossRef

Kernan BD, Sachs EM, Oliveira MA, Cima MJ (2007) Three dimensional printing of tungsten carbide-10 wt % cobalt using a cobalt oxide precursor. Int J Refract Met Hard Mater 25:82–94CrossRef

Khoshnevis B, Zhang J, Fateri M, Xiao Z (2014) Ceramics 3D printing by selective inhibition sintering. In: SFF proceedings, pp 163–169

Kirka M, Bansal R, Das S (2009) Recent progress on scanning laser epitaxy: a new technique for growing single crystal superalloys. In: SFF proceedings, pp 799–806

Korner C (2016) Additive manufacturing of metallic components by selective electron beam melting- a review. Int Mater Rev 61(5):361–377CrossRef

Kumar S (2003) Selective laser sintering-a qualitative and objective approach. JOM 55(10):43–47CrossRef

Kumar S (2014) Selective laser sintering/melting. Compr Mater Process 10:93–134CrossRef

Kumar N, Jain PK, Tandon P, Pandey PM (2018) Investigation on the effects of process parameters in CNC assisted pellet based fused layer modeling process. J Manuf Process 35:428–436CrossRef

Kunchala P, Kappagantula K (2018) 3D printing high density ceramics using binder jetting with nanoparticle densifiers. Mater Des 155:443–450CrossRef

Lanceros-Méndez S, Costa CM (2018) Printed batteries: materials, technologies and applications. Wiley, HobokenCrossRef

Lieberwirth C, Harder A, Seitz H (2017) Extrusion based additive manufacturing. J Mech Eng Autom 7:79–83

Liu FH, Liao YS (2010) Fabrication of inner complex ceramic parts by selective laser gelling. J Eur Ceram Soc 30(16):3283–3289CrossRef

Liu FH, Lee RT, Lin WH, Liao YS (2013) Selective laser sintering of bio-metal scaffold. Procedia CIRP 5:83–87CrossRef

Masood SH (2014) Advances in fused deposition modeling. Compr Mater Process 10:69–91CrossRef

Muhler T, Gomes C, Ascheri M et al (2015) Slurry-based powder beds for selective laser sintering of silicate ceramics. J Ceram Sci Technol 06(02):113–118

Nguyen AK, Narayan RJ (2017) Two-photon polymerization for biological applications. Mater Today 20(6):314–322CrossRef

Niaki MK, Torabi SA, Nonino F (2019) Why manufacturers adopt additive manufacturing technologies: the role of sustainability. J Clean Prod 222:381–392CrossRef

Niroumand H, Zain MFM, Jamil M, Niroumand S (2013) Earth architecture from ancient until today. Procedia Soc Behav Sci 89:222–225CrossRef

Pham CB, Leong KF, Lim TC, Chian KS (2008) Rapid freeze prototyping technique in bio-plotters for tissue scaffold fabrication. Rapid Prototyp J 14(4):246–253CrossRef

Ren X, Shao H, Lin T, Zheng H (2016) 3D gel-printing- an additive manufacturing method for producing complex shaped parts. Mater Des 101:80–87CrossRef

Roach RA, Bishop JE, Johnson K et al (2018) Using additive manufacturing as a pathway to change the qualification paradigm. In: SFF symposium proceedings, pp 3–13

Roschli A, Gaul KT, Boulger AM et al (2019) Designing for big area additive manufacturing. Addit Manuf 25:275–285

Rudraraju A, Das S (2009) Digital date processing strategies for large area maskless photopolymerization. In: SFF symposium proceedings, pp 299–307

Salonitis K (2014) Stereolithography. Compr Mat Process 10:19–67. ElsevierCrossRef

Santoliquido O, Colombo P, Ortona A (2019) Additive manufacturing of ceramic components by digital light processing: a comparison between the “bottom-up” and the “top-down” approaches. J Eur Ceram Soc 39(6):2140–2148CrossRef

Scheithauer U, Potschke J, Weingarten S et al (2017) Droplet-based additive manufacturing of hard metal components by thermoplastic 3D printing (T3DP). J Ceram Sci Technol 8(1):155–160

Schwarzer E, Götz M, Markova D et al (2017) Lithography-based ceramic manufacturing (LCM) – viscosity and cleaning as two quality influencing steps in the process chain of printing green parts. J Eur Ceram Soc 37(16):5329–5338CrossRef

Sillani F, Kleijnen RG, Vetterli M et al (2019) Selective laser sintering and multi jet fusion: process-induced modification of the raw materials and analyses of parts performance. Addit Manuf 27:32–41

Stringer J, Derby B (2009) Limits to feature size and resolution in ink-jet printing. J Eur Ceram Soc 29:913–918CrossRef

Tabernero I, Paskual A, Alvarez P, Suarez A (2018) Study on arc welding processes for high deposition rate additive manufacturing. Procedia CIRP 68:358–362CrossRef

Tang HH (2002) Direct laser fusing to form ceramic parts. Rapid Prototyp J 8(5):284–289CrossRef

Tarasov SY, Filippov AV, Shamarin NN et al (2019) Microstructural evolution and chemical corrosion of electron beam wire-feed additively manufactured AISI 304 stainless steel. J Alloys Compd 803:364–370CrossRef

Thomas HR, Hopkinson N, Erasenthiran P (2006) High speed sintering- continuing research into a new rapid manufacturing process. In: SFF proceedings, pp 682–691

Thompson MK, Moroni G, Vaneker T et al (2016) Design for additive manufacturing: trends, opportunities, considerations, and constraints. CIRP Ann 65(2):737–760CrossRef

Vilar R (2014) Laser powder deposition. Compr Mater Process 10:163–216. Elsevier LtdCrossRef

Wang Z, Liu R, Sparks T, Liou F (2016) Large scale deposition system by an industrial robot (I): design of fused pellet modeling system and extrusion process analysis. 3D Print Addit Manuf 3(1):39–47CrossRef

Wilkinson NJ, Smith MAA, Kay RW et al (2019) A review of aerosol jet printing – a non-traditional hybrid process for micro-manufacturing. Int J Adv Manuf Technol 105:1–21CrossRef

Wu S, Serbin J, Gu M (2006) Two-photon polymerization for three-dimensional micro-fabrication. J Photochem Photobiol A Chem 181:1–11CrossRef

Yan Z, Liu W, Tang Z et al (2018) Review on thermal analysis in laser-based additive manufacturing. Opt Laser Technol 106:427–441CrossRef

Yin S, Cavaliere P, Aldwell B et al (2018) Cold spray additive manufacturing and repair: fundamentals and applications. Addit Manuf 21:628–650

Yu HZ, Jones ME, Brady GW et al (2018) Non-beam-based metal additive manufacturing enabled by additive friction stir deposition. Scr Mater 153:122–130CrossRef

Zhang G, Chen H, Zhou H (2017) Additive manufacturing of green ceramic by selective laser gasifying of frozen slurry. J Eur Ceram Soc 37(7):2679–2684CrossRef

Zhang C, Chen F, Huang Z et al (2019) Additive manufacturing of functionally graded materials: a review. Mater Sci Eng A 764:138209CrossRef

Zuo H, Li H, Qi L, Zhong S (2016) Influence of interfacial bonding between metal droplets on tensile properties of 7075 Aluminum billets by additive manufacturing technique. J Mater Sci Technol 32(5):485–488CrossRef

Titel: Introduction
verfasst von: Sanjay Kumar
Verlag: Springer International Publishing
Buch: Additive Manufacturing Processes
Print ISBN: 978-3-030-45088-5

Electronic ISBN: 978-3-030-45089-2

Copyright-Jahr: 2020
DOI: https://doi.org/10.1007/978-3-030-45089-2_1

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht