nach oben

Erschienen in:

2015 | OriginalPaper | Buchkapitel

Investigation of the Effect of Biodiesel Blends on Fuel Injection Pumps Based on Vibration and Pressure Measurements

verfasst von : Ali Abruss, Yangchun Guo, Tie Wang, Fengshou Gu, Andrew D. Ball, D. Brown

Erschienen in: Vibration Engineering and Technology of Machinery

Verlag: Springer International Publishing

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Amongst alternative fuels for diesel-engine application, biodiesel is very attractive because it is biodegradable, an environmentally-friendly and sustainable source that can meet future energy demands. However, there are few published studies of the impact of biodiesel fuel and its blends on fuel injection pumps (FIPs). This study will investigate the influence of biodiesels derived from waste cooking oils with incremental blends of B10, B20, B30, B40 and B100. The FIP in this study is a rotary type attached to a four-cylinder, four-stroke direct injection, turbocharged diesel engine. Vibration and pressure measurements were made on the FIP. The results show the peak pressure close to the pump increases slightly the higher the proportion of biodiesel because of increased viscosity, density and bulk modulus of the fuel. Low frequency vibration increased as the proportion of biodiesel increased. These results demonstrate an increase in dynamic load on the pump components. However, high frequency vibration levels are lowest for the blends B10, B20 and B30, which may be helpful for improving the service life of the delivery.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel Delamination Detection in a Laminated Composite Beam Based on Changes in Natural Frequencies

Nächstes Kapitel Robustness Evaluation of Adhesively Bonded Ceramic Quad Flat Chips for Space Applications

Xue J, Grift TE, Hansen AC (2011) Effect of biodiesel on engine performances and emissions. Renew Sustain Energy Rev 15(2):1098–1116CrossRef

Tesfa B, Mishra R, Gu F, Powles N (2010) Prediction models for density and viscosity of biodiesel and their effects on fuel supply system in CI engines. Renew Energy 35:2752–2760

Yamane K, Ueta A, Shimamoto Y (2001) Influence of physical and chemical properties of biodiesel fuels on injection, combustion and exhaust emission characteristics in a direct injection compression ignition engine. Int J Engine Res 2(4):249–261CrossRef

Radu R, Petru C, Edward R, Gheorghe M (2009) Fueling an DI agricultural diesel engine with waste oil biodiesel: effects over injection, combustion and engine characteristics. Energy Convers Manag 50(9):2158–2166CrossRef

Ozsezen AN, Canakci M, Sayin C (2008) Effects of biodiesel from used frying palm oil on the performance, injection, and combustion characteristics of an indirect injection diesel engine. Energy Fuels 22(2):1297–1305CrossRef

Kegl B, Hribernik A (2006) Experimental analysis of injection characteristics using biodiesel fuel. Energy Fuels 20(5):2239–2248CrossRef

Eheim F (1982) Fuel injection pump for supercharged diesel internal combustion engines, in particular a distributor-type injection pump. U.S. patent no. 4,308,834. 5 Jan 1982

Edgar J Mechanical of A rotary distributor diesel fuel-injection pump type. http://www.autospeed.com/cms/article.html?&title=Our-Peugeot-Diesel-Part-4-Boost-and-the-Injection-System&A=109344

Tziourtzioumis D, Τζιουρτζιούμης Δ (2012) Experimental investigation of the steady state and transient operation of diesel engines fuelled by high percentage biodiesel blends. Ph.D. thesis

10.

Crua C, Heikal M (2012) Investigation of the internal dynamics of diesel nozzles by time-resolved laser doppler vibrometry. In: ICLASS 2012. 12th triennial international conference on liquid atomization and spray systems, Heidelberg, Germany

11.

Roosa VD (1978) Rotary distributor fuel injection pumps. U.S. patent no. 4,100,903

12.

Ftoutou E, Chouchane M, Besbès N, Ouali R (2006) Injection fault detection of a diesel engine by vibration analysis

13.

Alptekin E, Canakci M (2008) Determination of the density and the viscosities of biodiesel–diesel fuel blends. Renew Energy 33(12):2623–2630CrossRef

14.

Tat ME, Van Gerpen JH (2000) The specific gravity of biodiesel and its blends with diesel fuel. J Am Oil Chem Soc 77(2):115–119CrossRef

Titel: Investigation of the Effect of Biodiesel Blends on Fuel Injection Pumps Based on Vibration and Pressure Measurements
verfasst von: Ali Abruss
Yangchun Guo
Tie Wang
Fengshou Gu
Andrew D. Ball
D. Brown
Verlag: Springer International Publishing
Buch: Vibration Engineering and Technology of Machinery
Print ISBN: 978-3-319-09917-0

Electronic ISBN: 978-3-319-09918-7

Copyright-Jahr: 2015
DOI: https://doi.org/10.1007/978-3-319-09918-7_47

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht