nach oben

Optical and Quantum Electronics

Erschienen in:

01.04.2020

Investigation the effect of laser ablation parameters in a liquid in order to reduce the pulse energy during laser shock peening

verfasst von: I. Shiganov, D. Melnikov, A. Misyurov, M. Melnikova, D. Shtereveria, Zawye Myat

Erschienen in: Optical and Quantum Electronics | Ausgabe 4/2020

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The features of laser shock peening technology was studied in relation to the physical processes occurring during and after laser treatment. The effect of laser parameters on the results of the process was investigated. It was shown that the reduce of the diameter of the laser spot while maintaining the intensity leads to a decrease in the effect of LSP. This phenomenon was studied from the point of view of the features of plastic deformation at various sizes of the treatment zone using the standard model for the LSP process. Besides the features of the development of a plasma plume during laser ablation in a liquid are considered. It was shown that the liquid determines the geometry of the plume evolution and the shock wave caused by it. The process parameters used and the results obtained are important for the development of low-energy LSP technology.

Vorheriger Artikel Nanophysics in laser-induced cluster systems: topological quantum states in electrical conductivity and features of optical spectra—theory and experiment for dimensional effects

Nächster Artikel Optical properties of nanowires synthesized in regular nanochannels of porous matrices

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 340 Zeitschriften

aus folgenden Fachgebieten:

Bauwesen + Immobilien
Business IT + Informatik
Finance + Banking
Management + Führung
Marketing + Vertrieb
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Ageev, E.I., Kudryashova, S.I., Nikonorov, N.V., Nuryev, R.K., Petrov, A.A., Samokhvalov, A.A., Veiko, V.P.: Non-contact ultrasonic acquisition of femtosecond laser-driven ablative Mbar-level shock waves on Ti alloy surface. Appl. Phys. Lett. 108, 084106 (2016)ADSCrossRef

Amarchinta, H.K., Grandhi, R.V., Langer, K., Stargel, D.S.: Material model validation for laser shock peening process simulation. Model. Simul. Mater. Sci. Eng. 17, 015010 (2009). https://doi.org/10.1088/0965-0393/17/1/015010 ADSCrossRef

Bulgakova, N.M., Bulgakov, A.V., Babich, L.P.: Energy balance of pulsed laser ablation: Thermal model revised. Appl. Phys. A 79, 1323–1326 (2004)ADSCrossRef

Dhakal, B., Swaroop, S.: Review: Laser shock peening as post welding treatment technique. J. Manuf. Process. 32, 721–733 (2018)CrossRef

Dimiduk, D.M., Uchic, M.D., Parthasarathy, T.A.: Size-affected single-slip behavior of pure nickel microcrystals. Acta Mater. 53(15), 4065–4077 (2005)

Ding, K., Ye, L.: Simulation of multiple laser shock peening of a 35CD4 steel alloy. J. Mater. Process. Technol 178, 162–169 (2006)CrossRef

Fabbro, R., Peyre, P., Berthe, L., Scherpereel, X.: Physics and applications of laser-shock processing. J. Laser Appl. 10(265), 265–279 (1998)ADSCrossRef

Grigoryants, A.G., Shiganov, I.N., Melnikov, D.M., Misyurov, A.I.: Reducing residual tensile stresses in welded aluminium alloy joints by laser shock peening. Tsvetnye Metally 10, 86–91 (2018)CrossRef

Gujba, A.K.: Medraj, Mamoun: Laser peening process and its impact on materials properties in comparison with shot peening and ultrasonic impact peening. Materials 7, 7927–7974 (2014)ADSCrossRef

Guo, Y.B., Caslaru, R.: Fabrication and characterization of micro dent arrays produced by laser shock peening on titanium Ti–6Al–4V surfaces. J. Mater. Process. Technol. 211, 729–736 (2011)CrossRef

Gusarov, A.V., Smurov, I.: Thermal model of nanosecond pulsed laser ablation: analysis of energy and mass transfer. J. Appl. Phys. 97(1), 014307 (2005)ADSCrossRef

Gus'kov,Sergei Yu et al.: Generation of shock waves and formation of craters in a solid material irradiated by a short laser pulse. Quantum Electronics 34(11), 989–1003 (2004) https://dx.doi.org/10.1070/QE2004v034n11ABEH002695

Hackel, L., Rankin, J.R., Rubenchik, A., King, W.E., Matthews, M.: Laser peening: A tool for additive manufacturing. Addit. Manuf. 24, 67–75 (2018)

Hatamleh, O., Lyons, J., Forman, R.: Laser peening and shot peening effects on fatigue life and surface roughness of friction stir welded 7075–T7351 aluminum. Fatigue Fract. Eng. Mater. Struct. 30(2), 115–130 (2007)CrossRef

Hfaiedh, N., Peyre, P., Song, H., Popa, I., Ji, V., Vignal, V.: Finite element analysis of laser shock peening of 2050–T8 aluminum alloy. Int. J. Fatigue 70, 480–489 (2015)CrossRef

Hill, M., DeWald, A., Demma, A., Hackel, L., Chen, H., Dane, C., Specht, R., Harris, F.: Laser peening technology. ASM Int. 161, 2–4 (2003)

Kalainathan, S., Prabhakaran, S.: Recent development and future perspectives of low energy laser shock peening. Opt. Laser Technol. 81, 137–144 (2016)ADSCrossRef

Karbalaian, H. R., Yousefi-Koma, A., Karimpour, M., Mohtasebi, S. S.: Investigation on the Effect of Overlapping Laser Pulses in Laser Shock Peening with Finite Element Method. Procedia Materials Science 11, 454–458 (2015)

Kelly, R., Miotello, A.: On the mechanisms of target modification by ion beams and laser pulses. Nucl. Instrum. Methods Phys. Res. Sect. B Beam Interact. Mater. Atoms 122, 374–400 (1997)ADSCrossRef

Lee, D., Kannatey-Asibu, E.: Experimental investigation of laser shock peening using femtosecond laser pulses. J. Laser Appl. 23, 022004 (2011)ADSCrossRef

Loktionov, E.Y., Ovchinnikov, A.V., Protasov, Y.Y., Sitnikov, D.S.: Experimental study of polymers femtosecond laser ablation opto-mechanical characteristics at ambient and vacuum conditions. Tech. Phys. Lett. 36(7), 588–591 (2010)ADSCrossRef

Loktionov, E.Y.: Study of laser ablation efficiency for an acrylic-based photopolymerizing composition. J. Appl. Spectrosc. 81(2), 305–308 (2014)ADSCrossRef

Melnikov, D.M., Kalyonova, E.A., Tulpanova, E.M., Zawye Myat, Bogdanov A.V.: Perspektivy primenenija lazernogo nakljopa dlja povyshenija harakteristik detalej, poluchaemyh metodom selektivnogo lazernogo plavlenija. Naukojomkie tehnologii v mashinostroenii 7, 32–37 (2018)

Nakano, H., Miyauti, S., Butani, N., Shibayanagi, T., et al.: Femtosecond laser peening of stainless steel. J. Laser Micro/Nanoeng. 4, 35–38 (2009)CrossRef

Namiki, A., Katoh, K., Yamashita, Y., Matsumoto, Y.: Dynamics of laser sputtering at GaN, GaP, and GaAs surfaces. J. Appl. Phys. 70, 3268–3274 (1991). https://doi.org/10.1063/1.350348 ADSCrossRef

Petan, L., Ocaña, J.L., Grum, J.: Influence of laser shock peening pulse density and spot size on the surface integrity of X2NiCoMo18-9-5 maraging steel. Surf. Coat. Technol. 307, 262–270 (2016)CrossRef

Peyre, P., Berthe, L., Scherpereel, X., Fabbro, R., Bartnicki, E.: Experimental study of laser-driven shock waves in stainless steels. J. Appl. Phys 84(2), 5985–5992 (1998)ADSCrossRef

Pravednikov, I.S., Ignat'eva, I.A. Issledovanie svjazi mikrotverdosti splava i stepeni deformacii pri razlichnyh temperaturah. Voprosy optimal'nogo rezanija metallov. Sb. nauch. Trudov. 77, 160–161 (1975)

Protasov, YuYu, Ovchinnikov, A.V., Loktionov, EYu, Sitnikov, D.S.: A technique for experimental determination of the condensed media laser ablation momentum coupling coefficient in vacuum. Instrum. Exp. Tech. 53(4), 596–600 (2010)CrossRef

Ramkumara, K.D., Narenthiran, A., Konjenti, A., Pravin, P.N., Kanish, T.C.: Effect of low energy laser shock peening on the mechanical integrity of Hastelloy C-276 welds. J. Mater. Process. Tech. 274, 116296 (2019)CrossRef

Sathyajith, S., Kalainathan, S., Swaroop, S.: Laser peening without coating on aluminum alloy Al-6061-T6 using low energy Nd:YAG laser. Opt. Laser Technol. 45, 389–394 (2013)ADSCrossRef

Shiganov, I.N., Misurov, A.I., Melnikov, D.M.: Laser shock peening of welded joints. IOP Conf. Ser. J. Phys. Conf. Ser. 1109, 1–7 (2018). https://doi.org/10.1088/1742-6596/1109/1/012018 CrossRef

Shiganov, I.N., Taksants, M.V., Melnikov, D.M., Shtereveria, D.S., Melnikova, M.A.: Laser shock peening with low-energy laser sources: techniques and prospects. AIP Conf. Proc. 2171, 200007 (2019)CrossRef

Shupenev, A.E., Korshunov, I.S., Iliin, A.S., Osipkov, A.S., Grigoryants, A.G.: Bismuth-telluride-based radiation thermopiles prepared by pulsed laser deposition. Semiconductors 53(6), 747–751 (2019)ADSCrossRef

Wang, J.T., Zhang, Y.K., Chen, J.F., Zhou, J.Y., Ge, M.Z., Lu, Y.L., Li, X.L.: Effects of laser shock peening on stress corrosion behavior of 7075 aluminum alloy laser welded joints. Mater. Sci. Eng. A 647, 7–14 (2015)CrossRef

Ye, Y.X., Feng, Y.Y., Lian, Z.C., Hua, Y.Q.: Plastic deformation mechanism of polycrystalline copper foil shocked with femtosecond laser. Appl. Surf. Sci. 309, 240–249 (2014)ADSCrossRef

Titel: Investigation the effect of laser ablation parameters in a liquid in order to reduce the pulse energy during laser shock peening
verfasst von: I. Shiganov
D. Melnikov
A. Misyurov
M. Melnikova
D. Shtereveria
Zawye Myat
Publikationsdatum: 01.04.2020
Verlag: Springer US
Erschienen in: Optical and Quantum Electronics / Ausgabe 4/2020
Print ISSN: 0306-8919
Elektronische ISSN: 1572-817X
DOI: https://doi.org/10.1007/s11082-020-02278-9

Neuer Inhalt

Bildnachweise

VDI-Icon, Profil Icon, inhalt2, Springer Professional Modul/© Springer Fachmedien Wiesbaden GmbH, Zukunftswerkstatt Sales Excellence_ieS/© Springer Fachmedien Wiesbaden GmbH, Search Icon, Banner Hanser, Dr. Alexandru Oproiescu/© Dr. Alexandru Oproiescu, Julian Erhard/© Packex GmbH, Cloud Netzwerk Open Banking/© vege / Fotolia, Zeitschrift Wissensmanagement Cover, PatentFit-Logo/© Springer Fachmedien Wiesbaden GmbH, Zukunftswerkstatt Sales Excellence 2024/© AndreyPopov / Getty Images / iStock, 2023_Antrieb/© supervisuell, ATZ-Webinar: Prototypenfreie Entwicklung durch Offline- und Driver-in-the-Loop-HiL-Tests /© (c) VI-grade

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Technik"

Springer Professional "Wirtschaft+Technik"

Springer Professional "Wirtschaft"

Weitere Artikel der Ausgabe 4/2020

Near-infrared absorption enhancement for perovskite solar cells via the rear grating design

Orthogonally polarized and 60 GHz dual-channel based 18 × 2.5 Gb/s DWDM-interleaved hybrid FSO system under atmospheric turbulence

Effect of thioglycolic acid molecules on luminescence properties of S quantum dots

Ab initio study of electronic, optical and thermoelectric character of intermetallic compounds XGa3 (X = Fe, Ru, Os)

Nanoantenna with electrically tunable radiation pattern

Frequency pulling in optoelectronic oscillator by RF signal injection

Neuer Inhalt

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.