2019 | OriginalPaper | Buchkapitel
Investigations on Residual Stress Generation in Extruded Steel Components
Untersuchungen zur Eigenspannungsentstehung in fließgepressten Stahlbauteilen
verfasst von : Andreas Jobst, Christoph Kiener, Marion Merklein
Erschienen in: Production at the leading edge of technology
Verlag: Springer Berlin Heidelberg
Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.
Wählen Sie Textabschnitte aus um mit Künstlicher Intelligenz passenden Patente zu finden. powered by
Markieren Sie Textabschnitte, um KI-gestützt weitere passende Inhalte zu finden. powered by
During the forming of components, inhomogeneous stress conditions lead to residual stresses, which influence the operating behaviour of the manufactured part. Compressive residual stresses generally have a positive effect, while tensile residual stresses reduce the fatigue strength and facilitate crack initiation. Full forward extrusion has been established as an industrial manufacturing technique, where cylindrical billets are formed in the die and ejected in opposite direction. In order to influence the residual stresses state, it is essential to know about its formation. A basic understanding is created by separate investigation of the forming and the ejection step. In the context of this paper, singlephase ferritic stainless steel X6Cr17 and ferritic-austenitic duplex steel X2CrNi- MoN22-5-3 are used. The quantification of the residual stresses states is carried out by X-ray diffractometry, for which a measurement method for duplex steel is validated. The influence of forming and ejection is determined separately by manufacturing components with and without an ejection operation.