Ausgabe 17/2007
Inhalt (82 Artikel)
Synthesis and characterization of Ti-SBA-16 ordered mesoporous silica composite
Shaodian Shen, Yan Deng, Guibo Zhu, Dongsen Mao, Yuhong Wang, Guishen Wu, Jun Li, XiaoZhen Liu, Guanzhong Lu, Dongyuan Zhao
Synthesis of a soluble polyaniline–ferrite composite: magnetic and electric properties
Juan C. Aphesteguy, Silvia E. Jacobo
Characterizing the surface properties of carbon nanotubes by inverse gas chromatography
Xiali Zhang, Dong Yang, Peng Xu, Changchun Wang, Qiangguo Du
Polyol-mediated synthesis of nanoscale Mg(OH)2 and MgO
Claus Feldmann, Susanne Matschulo, Sascha Ahlert
Synthesis of mesoporous nanocrystalline zirconia with tetragonal crystallite phase by using ethylene diamine as precipitation agent
Mehran Rezaei, Seyed Mahdi Alavi, Saeed Sahebdelfar, Liu Xinmei, Zi-Feng Yan
Solid-state synthesis of nano-sized BaTiO3 powder with high tetragonality
Sung-Soo Ryu, Dang-Hyok Yoon
Assembled nanoparticle films with crown ether–metal ion “sandwiches” as sensing mechanisms for metal ions
Lesley E. Russell, Rebecca R. Pompano, Kevin W. Kittredge, Michael C. Leopold
Electrical properties and positron annihilation study of (Ba1−x Ho x )TiO3 ceramics
Fanggao Chang, Tao Li, Yongxia Ge, Zhenping Chen, Zhongshi Liu, Xiping Jing
Reactionary processes during mechanical treatment of mixtures of ZnO and MnO2. I. Formation of defects and solid solution
Mykola Kakazey, Marina Vlasova, Martha Dominguez-Patiño, Ismael Leon, Momcilo Ristic
Evolution of microstructures and phases of Al–Mg alloy under 4 GPa high pressure
Z. J. Wei, Z. L. Wang, H. W. Wang, L. Cao
Highly textured La2Zr2O7 and CeO2 buffer layers by ink jet printing for coated conductors
M. C. Cordero-Cabrera, T. Mouganie, B. A. Glowacki, M. Bäcker, M. Falter, B. Holzapfel, J. Engell
Preparation of rutile (TiO2) nanostructured materials at low temperature from TiCl4 aqueous solution
Ru-Fen Chen, Lei Zhang, Yu Wei, Deng-Lu Hou
Preparation and antibacterial activity of novel fluoroalkyl end-capped oligomers/silica nanocomposites-encapsulated low molecular biocides
Hideo Sawada, Hiroshi Kakehi, Masashi Koizumi, Yoshihiro Katoh, Masashi Miura
Anatase TiO2 nanoparticles/carbon nanotubes nanofibers: preparation, characterization and photocatalytic properties
Guangjun Hu, Xiangfu Meng, Xiyan Feng, Yanfen Ding, Shimin Zhang, Mingshu Yang
Gas permeability behavior of mullite-bonded porous silicon carbide ceramics
Shuqiang Ding, Yu-Ping Zeng, Dongliang Jiang
A study of the optical absorption in CdTe by photoacoustic spectroscopy
O. Vigil-Galán, E. Marín, J-Sastré Hernández, E. Saucedo, C. M. Ruiz, G. Contreras-Puente, A. Calderón
Niobium pentoxide as promoter in the mixed MgH2/Nb2O5 system for hydrogen storage: a multitechnique investigation of the H2 uptake
Francesco Dolci, Marco Di Chio, Marcello Baricco, Elio Giamello
Study of irradiation effect on poly(vinylidene fluoride-trifluoroethylene) copolymers
Weiping Li, Yuejin Zhu, Limin Jiang, Peiqing Wang, Jun Wang
Method for preparing highly dispersed Pt catalysts on mesoporous carbon support
Jianhuang Zeng, Fabing Su, Jim Yang Lee, X. S. Zhao, Jianjun Chen, Xiaohua Jiang
Quasicrystal–crystal structural transformation in Al–5 wt.% Mn alloy
Karel Saksl, Dalibor Vojtěch, Hermann Franz
Polymeric foam deformation under dynamic loading by the use of the microtomographic technique
Philippe Viot, Dominique Bernard, Erwan Plougonven
Fabrication and magnetic properties of NiFe2O4 nanocrystalline nanotubes
Fashen Li, Lijing Song, Dong Zhou, Tao Wang, Ying Wang, Haibo Wang
Properties of Ni/YSZ porous cermets prepared by electroless coating technique for SOFC anode application
Swadesh K. Pratihar, A. Dassharma, H. S. Maiti
Improvement of the foaming process for 4045 and 6061 aluminium foams by using the Taguchi methodology
Eusebio Solórzano, José Antonio Reglero, Miguel Ángel Rodríguez-Pérez, José Antonio de Saja, María Luz Rodríguez-Méndez
The influence of the oxidation time on the optical properties of the ceramic thermal control coating prepared by micro-plasma oxidation
Xiaohong Wu, Wei Qin, Bo Cui, Zhaohua Jiang, Yun Guo, Zhaoyang Xie
Damping mechanism of chlorobutyl rubber and phenolic resin vulcanized blends
Liangliang Qu, Guangsu Huang, Jinrong Wu, Zhenhua Tang
The derivation of the microfibril angle in softwood using wide-angle synchrotron X-ray diffraction on structurally characterised specimens
Kenneth M. Entwistle, K. Kong, M. A. MacDonald, N. Navaranjan, S. J. Eichhorn
The role of gas penetration on morphological formation of polycarbonate/polyethylene blend molded by gas-assisted injection molding
Guo-Qiang Zheng, Wei Yang, Li Huang, Zhong-Ming Li, Ming-Bo Yang, Bo Yin, Qian Li, Chun-Tai Liu, Chang-Yu Shen
Effect of in situ spinel seeding on synthesis of MgO-rich MgAl2O4 composite
Deepak Mohapatra, Debasish Sarkar
Effect of ingredient on optical properties of Ag/Cu metal alloy nanoclusters in silica glass
Y. H. Wang, C. Z. Jiang, F. Ren, Q. Q. Wang, D. J. Chen, D. J. Fu
Microstructure-microhardness relationships in friction stir welded AA5251
Moataz M. Attallah, Claire L. Davis, Martin Strangwood
The effect of annealing time on r.f. magnetron sputtered La3Ga5SiO14 films
Feng-Wei Wang, Yi Hu, Hur-Lon Lin
Modified directed melt nitridation of pure aluminum block using magnesium as an external dopant
Shengli Jin, Yawei Li, Yuanbing Li, Lei Zhao, Liu Xiaohua, Jing Liu, Zeya Li
Microstructure and ferroelectric properties of soft-doped sol–gel derived PZT/SKN fibers
Ralf Hansch, Wolfgang Braue, Susanne Seifert, Dieter Sporn, Gerd Müller
Impact of metal filler on the dielectric properties of Nylon 11
S. A. Pande, D. S. Kelkar, D. R. Peshwe
Crystalline quality and phase purity of CVD diamond films studied by Raman spectroscopy
W. Fortunato, A. J. Chiquito, J. C. Galzerani, J. R. Moro
Effect of inner oxygen on the interfacial layer formation for HfO2 gate dielectric
Ran Jiang, E. Q. Xie, Z. F. Wang
Measurement of the dynamic Young’s modulus of porous titanium and Ti6Al4V
Ke Zhu, Chengfeng Li, Zhengang Zhu, C. S. Liu
Particle distribution and interfacial reactions of Al–7%Si–10%B4C die casting composite
Zhan Zhang, X.-G. Chen, A. Charette
Frequency and temperature dependence of electrical properties of barium and gadolinium substituted SrBi2Nb2O9 ceramics
Konapala Sambasiva Rao, Dasari Madhava Prasad, Prayaga Murali Krishna, B. Hima Bindu, K. Suneetha
Non-destructive analysis of silver selenide films obtained by Pulsed Laser Deposition (PLD) with Micro-XRF
Rainer Dargel, Mohamed Azeroual, Boris Mogwitz, Juergen Janek, Carla Vogt
Thermal stresses in aluminum 6061 and nylon 66 long fiber thermoplastic (LFT) composite joint in a tailcone
Rahul R. Kulkarni, Krishan K. Chawla, Uday K. Vaidya, James M. Sands
Effect of Ti4+:Sn4+ ratio on the phase transition and electric properties of PLZST antiferroelectric ceramics
Lin Wang, Qiang Li, Lihong Xue, Ximin Liang
Microstructural evolution during thermal stabilization of PAN fibers
Dong-Xin He, Cheng-Guo Wang, Yu-Jun Bai, Ning Lun, Bo Zhu, Yan-Xiang Wang
Effect of SiCp addition on age-hardening of aluminium composite and closed cell aluminium composite foam
V. Rajput, D. P. Mondal, S. Das, N. Ramakrishnan, A. K. Jha
Effect of current stressing on the reliability of 63Sn37Pb solder joints
B. Y. Wu, Y. C. Chan, H. W. Zhong, M. O. Alam
Effect of La substitution on structural and electrical properties of Ba(Fe2/3W1/3)O3 nanoceramics
R. N. P. Choudhary, Dillip K. Pradhan, C. M. Tirado, G. E. Bonilla, R. S. Katiyar
Physical origin of spontaneous interfacial alloying in immiscible W/Cu multilayers
Pascale Villain, Philippe Goudeau, Frederic Badawi, G. Ouyang, G. W. Yang, Véronique Pélosin
Standardization of a shear test method for lead-free solder paste chip joints
Jai-Kyoung Choi, Jai-Hyun Park, Yong-Sik Ahn
RETRACTED ARTICLE: Determination of dopant of ceria system by density functional theory
K. Muthukkumaran, Roshan Bokalawela, Tom Mathews, S. Selladurai
The influence of the segregation of Cu-rich phase on the microstructural and impedance characteristics of CaCu3Ti4O12 ceramics
B. Shri Prakash, K. B. R. Varma
Material properties of portland cement paste with nano-montmorillonite
Ta-Peng Chang, Jeng-Ywan Shih, Kuo-Ming Yang, Tien-Chin Hsiao
Mixing in Au/Ge system induced by Ar+ ion irradiation
J. M. Nawash, N. M. Masoud, K. A. Al-Saleh, N. S. Saleh
Study on the reduction of highly porous TiO2 precursors and thin TiO2 layers by the FFC-Cambridge process
R. Lilia Centeno-Sánchez, Derek J. Fray, George Z. Chen
Compressive mechanical response of a low-density epoxy foam at various strain rates
B. Song, W. Chen, W.-Y. Lu
Effect of copper on annealing characteristics of interstitial free steels
Radhakanta Rana, Shiv Brat Singh, Omkar Nath Mohanty
Transgranular fracture in low temperature brittle fracture of high nitrogen austenitic steel
Shiyong Liu, Deyi Liu, Shicheng Liu
Ultrasound devulcanization: comparison of synthetic isoprene and natural rubbers
Ximei Sun, Avraam I. Isayev
Preparation and characterization of blends of recycled polystyrene with cassava starch
Tais A. P. F. Pimentel, Jussara A. Durães, Adriana L. Drummond, Daniela Schlemmer, Rosana Falcão, Maria José Araújo Sales
On the use of the geometric mean approximation in estimating the effective hygro-elastic behavior of fiber-reinforced composites
Sylvain Fréour, Frederic Jacquemin, Ronald Guillén
Effect vapor grown carbon nanofiber on thermal and mechanical properties of epoxy
Yuanxin Zhou, Farhana Pervin, Shaik Jeelani
Plasma transferred arc surface modification of a low carbon steel
João J. Tigrinho, Ana Sofia C. M. d’Oliveira
Carbothermic reduction of zinc sulfide in the presence of calcium oxide and lithium carbonate
Y. C. Peng, C. I. Lin, H. K. Chen
A simple synthesis of amine-derivatised superparamagnetic iron oxide nanoparticles for bioapplications
Sasmita Mohapatra, Nabakumar Pramanik, Samrat Mukherjee, Sudip K. Ghosh, Panchanan Pramanik
The effects of heat treatment on the mechanical properties of multicomponent white cast irons
A. Ziadi, F. J. Belzunce, C. Rodriguez
Rolling and recrystallisation textures in Cu–Al, Cu–Mn and Cu–Ni alloys
Subramanya Sarma Vadlamani, Joerg Eickemeyer, Ludwig Schultz, Bernhard Holzapfel
Impression creep of monolithic and composite lead free solders
Purushotham K. Muthur Srinath, Pranesh B. Aswath
Fabrication of bulk UFG magnesium alloys by cyclic extrusion compression
Yongjun Chen, Qudong Wang, Jinbao Lin, Lujun Zhang, Chunquan Zhai
Glass-like carbon derived from a polymer consisting of furfuryl alcohol and tetraethylene glycol
Tetsuro Hirasaki, Takeshi Meguro, Toru Wakihara, Junichi Tatami, Katsutoshi Komeya
Low and increased solubility of silicon in metal nitrides: evidence by X-ray absorption near edge structure
Jose Luis Endrino, Sergio Palacín, Alejandro Gutiérrez, Franz Schäffers, James E. Krzanowski
Controlling POSS dispersion in epoxy in nanocomposite by introducing multi-epoxy POSS groups
Yen-Zen Wang, Huang-Shian Tsai, Zhao-Yu Ji, Wen-Yi Chen
Effect of grain size on the activation energy for plastic deformation near room temperature in a Zn–28.7 pct Al–1.9 pct Cu alloy
J. D. Muñoz-Andrade, A. Mendoza-Allende, E. Cabrera, G. Torres-Villaseñor, J. A. Montemayor-Aldrete