nach oben

Erschienen in:

2008 | OriginalPaper | Buchkapitel

3. Mechanics of Polymers: Viscoelasticity

verfasst von : Wolfgang G. Knauss, Prof., Igor Emri, Hongbing Lu, Prof.

Erschienen in: Springer Handbook of Experimental Solid Mechanics

Verlag: Springer US

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

With the heavy influx of polymers into engineering designs their special, deformation-rate-sensitive properties require particular attention. Although we often refer to them as time-dependent materials, their properties really do not depend on time, but time histories factor prominently in the responses of polymeric components or structures. Structural responses involving time-dependent materials cannot be assessed by simply substituting time-dependent modulus functions for their elastic counterparts. The outline provided here is intended to provide guidance to the experimentally inclined researcher who is not thoroughly familiar with how these materials behave, but needs to be aware of these materials because laboratory life and applications today invariably involve their use.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel Materials Science for the Experimental Mechanist

Nächstes Kapitel Composite Materials

3.1.

W.G. Knauss: The mechanics of polymer fracture, Appl. Mech. Rev. 26, 1–17 (1973)

3.2.

C. Singer, E.J. Holmgard, A.R. Hall (Eds.): A History of Technology (Oxford University Press, New York 1954)

3.3.

J.M. Kelly: Strain rate sensitivity and yield point behavior in mild steel, Int. J. Solids Struct. 3, 521–532 (1967)

3.4.

H.H. Johnson, P.C. Paris: Subcritical flaw growth, Eng. Fract. Mech. 1, 3–45 (1968)

3.5.

I. Finnie: Stress analysis for creep and creep-rupture. In: Appllied Mechanics Surveys, ed. by H.N. Abramson (Spartan Macmillan, New York 1966) pp. 373–383

3.6.

F. Garofalo: Fundamentals of Creep and Creep Rupture in Metals (Macmillan, New York 1965)

3.7.

N.J. Grant, A.W. Mullendore (Eds.): Deformation and Fracture at Elevated Temperatures (MIT Press, Cambridge 1965)

3.8.

F.A. McClintock, A.S. Argon (Eds.): Mechanical Behavior of Materials (Addison-Wesley, Reading 1966)

3.9.

J.B. Conway: Numerical Methods for Creep and Rupture Analyses (Gordon-Breach, New York 1967)

3.10.

J.B. Conway, P.N. Flagella: Creep Rupture Data for the Refractory Metals at High Temperatures (Gordon-Breach, New York 1971)

3.11.

M. Tao: High Temperature Deformation of Vitreloy Bulk Metallic Glasses and Their Composite. Ph.D. Thesis (California Institute of Technology, Pasadena 2006)

3.12.

J. Lu, G. Ravichandran, W.L. Johnson: Deformation behavior of the Zr_41.2Ti_13.8Cu_12.5Ni_10Be_22.5 bulk metallic glass over a wide range of strain-rates and temperatures, Acta Mater. 51, 3429–3443 (2003)

3.13.

W.G. Knauss: Viscoelasticity and the time-dependent fracture of polymers. In: Comprehensive Structural Integrity, Vol. 2, ed. by I. Milne, R.O. Ritchie, B. Karihaloo (Elsevier, Amsterdam 2003)

3.14.

W. Flügge: Viscoelasticity (Springer, Berlin 1975)MATH

3.15.

H. Lu, X. Zhang, W.G. Knauss: Uniaxial, shear and Poisson relaxation and their conversion to bulk relaxation, Polym. Eng. Sci. 37, 1053–1064 (1997)

3.16.

N.W. Tschoegl, W.G. Knauss, I. Emri: Poissonʼs ratio in linear viscoelasticity, a critical review, Mech. Time-Depend. Mater. 6, 3–51 (2002)

3.17.

I.L. Hopkins, R.W. Hamming: On creep and relaxation, J. Appl. Phys. 28, 906–909 (1957)

3.18.

R.A. Schapery: Approximate methods of transform inversion for viscoelastic stress analysis, Proc. 4th US Natl. Congr. Appl. Mech. (1962) pp. 1075–1085

3.19.

J.F. Clauser, W.G. Knauss: On the numerical determination of relaxation and retardation spectra for linearly viscoelastic materials, Trans. Soc. Rheol. 12, 143–153 (1968)

3.20.

G.W. Hedstrom, L. Thigpen, B.P. Bonner, P.H. Worley: Regularization and inverse problems in viscoelasticity, J. Appl. Mech. 51, 121–12 (1984)MATH

3.21.

I. Emri, N.W. Tschoegl: Generating line spectra from experimental responses. Part I: Relaxation modulus and creep compliance, Rheol. Acta. 32, 311–321 (1993)

3.22.

I. Emri, N.W. Tschoegl: Generating line spectra from experimental responses. Part IV: Application to experimental data, Rheol. Acta. 33, 60–70 (1994)

3.23.

I. Emri, N.W. Tschoegl: An iterative computer algorithm for generating line spectra from linear viscoelastic response functions, Int. J. Polym. Mater. 40, 55–79 (1998)

3.24.

N.W. Tschoegl, I. Emri: Generating line spectra from experimental responses. Part II. Storage and loss functions, Rheol. Acta. 32, 322–327 (1993)

3.25.

N.W. Tschoegl, I. Emri: Generating line spectra from experimental responses. Part III. Interconversion between relaxation and retardation behavior, Int. J. Polym. Mater. 18, 117–127 (1992)

3.26.

I. Emri, N.W. Tschoegl: Generating line spectra from experimental responses. Part V. Time-dependent viscosity, Rheol. Acta. 36, 303–306 (1997)

3.27.

I. Emri, B.S. von Bernstorff, R. Cvelbar, A. Nikonov: Re-examination of the approximate methods for interconversion between frequency- and time-dependent material functions, J. Non-Newton. Fluid Mech. 129, 75–84 (2005)MATH

3.28.

A. Nikonov, A.R. Davies, I. Emri: The determination of creep and relaxation functions from a single experiment, J. Rheol. 49, 1193–1211 (2005)

3.29.

M.A. Branch, T.F. Coleman, Y. Li: A subspace interior, and conjugate gradient method for large-scale bound-constrained minimization problems, Siam J. Sci. Comput. 21, 1–23 (1999)MATHMathSciNet

3.30.

F. Kohlrausch: Experimental-Untersuchungen über die elastische Nachwirkung bei der Torsion, Ausdehnung und Biegung, Pogg. Ann. Phys. 8, 337 (1876)

3.31.

G. Williams, D.C. Watts: Non-symmetrical dielectric behavior arising from a simple empirical decay function, Trans. Faraday Soc. 66, 80–85 (1970)

3.32.

S. Lee, W.G. Knauss: A note on the determination of relaxation and creep data from ramp tests, Mech. Time-Depend. Mater. 4, 1–7 (2000)

3.33.

A. Flory, G.B. McKenna: Finite step rate corrections in stress relaxation experiments: A comparison of two methods, Mech. Time-Depend. Mater. 8, 17–37 (2004)

3.34.

J.F. Tormey, S.C. Britton: Effect of cyclic loading on solid propellant grain structures, AIAA J. 1, 1763–1770 (1963)

3.35.

R.A. Schapery: Thermomechanical behavior of viscoelastic media with variable properties subjected to cyclic loading, J. Appl. Mech. 32, 611–619 (1965)MathSciNet

3.36.

L.R.G. Treloar: Physics of high-molecular materials, Nature 181, 1633–1634 (1958)

3.37.

M.-F. Vallat, D.J. Plazek, B. Bushan: Effects of thermal treatment of biaxially oriented poly(ethylene terephthalate), J. Polym. Sci. Polym. Phys. 24, 1303–1320 (1986)

3.38.

L.E. Struik: Physical Aging in Amorphous Polymers and Other Materials (Elsevier Scientific, Amsterdam 1978)

3.39.

G.B. McKenna, A.J. Kovacs: Physical aging of poly(methyl methacrylate) in the nonlinear range – torque and normal force measurements, Polym. Eng. Sci. 24, 1138–1141 (1984)

3.40.

A. Lee, G.B. McKenna: Effect of crosslink density on physical aging of epoxy networks, Polymer 29, 1812–1817 (1988)

3.41.

C. GʼSell, G.B. McKenna: Influence of physical aging on the yield response of model dgeba poly(propylene oxide) epoxy glasses, Polymer 33, 2103–2113 (1992)

3.42.

M.L. Cerrada, G.B. McKenna: Isothermal, isochronal and isostructural results, Macromolecules 33, 3065–3076 (2000)

3.43.

L.C. Brinson, T.S. Gates: Effects of physical aging on long-term creep of polymers and polymer matrix composites, Int. J. Solids Struct. 32, 827–846 (1995)MATH

3.44.

L.M. Nicholson, K.S. Whitley, T.S. Gates: The combined influence of molecular weight and temperature on the physical aging and creep compliance of a glassy thermoplastic polyimide, Mech. Time-Depend. Mat. 5, 199–227 (2001)

3.45.

J.D. Ferry: Viscoelastic Properties of Polymers, 3rd edn. (Wiley, New York 1980)

3.46.

J.R. Mcloughlin, A.V. Tobolsky: The viscoelastic behavior of polymethyl methacrylate, J. Colloid Sci. 7, 555–568 (1952)

3.47.

H. Leaderman, R.G. Smith, R.W. Jones: Rheology of polyisobutylene. 2. Low molecular weight polymers, J. Polym. Sci. 14, 47–80 (1954)

3.48.

J. Bischoff, E. Catsiff, A.V. Tobolsky: Elastoviscous properties of amorphous polymers in the transition region 1, J. Am. Chem. Soc. 74, 3378–3381 (1952)

3.49.

F. Schwarzl, A.J. Staverman: Time-temperature dependence of linearly viscoelastic behavior, J. Appl. Phys. 23, 838–843 (1952)MATH

3.50.

M.L. Williams, R.F. Landel, J.D. Ferry: Mechanical properties of substances of high molecular weight. 19. The temperature dependence of relaxation mechanisms in amorphous polymers and other glass-forming liquids, J. Am. Chem. Soc. 77, 3701–3707 (1955)

3.51.

D.J. Plazek: Temperature dependence of the viscoelastic behavior of polystyrene, J. Phys. Chem. US 69, 3480–3487 (1965)

3.52.

D.J. Plazek: The temperature dependence of the viscoelastic behavior of poly(vinyl acetate), Polym. J. 12, 43–53 (1980)

3.53.

R.A. Fava (Ed.): Methods of experimental physics 16C. In: Viscoelastic and Steady-State Rheological Response, ed. by D.J. Plazek (Academic, New York 1979)

3.54.

L.W. Morland, E.H. Lee: Stress analysis for linear viscoelastic materials with temperature variation, Trans. Soc. Rheol. 4, 233–263 (1960)MathSciNet

3.55.

L.J. Heymans: An Engineering Analysis of Polymer Film Adhesion to Rigid Substrates. Ph.D. Thesis (California Institute of Technology, Pasadena 1983)

3.56.

G.U. Losi, W.G. Knauss: Free volume theory and nonlinear viscoelasticity, Polym. Eng. Sci. 32, 542–557 (1992)

3.57.

I. Emri, T. Prodan: A Measuring system for bulk and shear characterization of polymers, Exp. Mech. 46(6), 429–439 (2006)

3.58.

N.W. Tschoegl, W.G. Knauss, I. Emri: The effect of temperature and pressure on the mechanical properties of thermo- and/or piezorheologically simple polymeric materials in thermodynamic equilibrium – a critical review, Mech. Time-Depend. Mater. 6, 53–99 (2002)

3.59.

R.W. Fillers, N.W. Tschoegl: The effect of pressure on the mechanical properties of polymers, Trans. Soc. Rheol. 21, 51–100 (1977)

3.60.

W.K. Moonan, N.W. Tschoegl: The effect of pressure on the mechanical properties of polymers. 2. Expansively and compressibility measurements, Macromolecules 16, 55–59 (1983)

3.61.

W.K. Moonan, N.W. Tschoegl: The effect of pressure on the mechanical properties of polymers. 3. Substitution of the glassy parameters for those of the occupied volume, Int. Polym. Mater. 10, 199–211 (1984)

3.62.

W.K. Moonan, N.W. Tschoegl: The effect of pressure on the mechanical properties of polymers. 4. Measurements in torsion, J. Polym. Sci. Polym. Phys. 23, 623–651 (1985)

3.63.

W.G. Knauss, V.H. Kenner: On the hygrothermomechanical characterization of polyvinyl acetate, J. Appl. Phys. 51, 5131–5136 (1980)

3.64.

I. Emri, V. Pavšek: On the influence of moisture on the mechanical properties of polymers, Mater. Forum 16, 123–131 (1992)

3.65.

D.J. Plazek: Magnetic bearing torsional creep apparatus, J. Polym. Sci. Polym. Chem. 6, 621–633 (1968)

3.66.

D.J. Plazek, M.N. Vrancken, J.W. Berge: A torsion pendulum for dynamic and creep measurements of soft viscoelastic materials, Trans. Soc. Rheol. 2, 39–51 (1958)

3.67.

G.C. Berry, J.O. Park, D.W. Meitz, M.H. Birnboim, D.J. Plazek: A rotational rheometer for rheological studies with prescribed strain or stress history, J. Polym. Sci. Polym. Phys. Ed. 27, 273–296 (1989)

3.68.

R.S. Duran, G.B. McKenna: A torsional dilatometer for volume change measurements on deformed glasses: Instrument description and measurements on equilibrated glasses, J. Rheol. 34, 813–839 (1990)

3.69.

J.E. McKinney, S. Edelman, R.S. Marvin: Apparatus for the direct determination of the dynamic bulk modulus, J. Appl. Phys. 27, 425–430 (1956)

3.70.

J.E. McKinney, H.V. Belcher: Dynamic compressibility of poly(vinyl acetate) and its relation to free volume, J. Res. Nat. Bur. Stand. Phys. Chem. 67A, 43–53 (1963)

3.71.

T.H. Deng, W.G. Knauss: The temperature and frequency dependence of the bulk compliance of Poly(vinyl acetate). A re-examination, Mech. Time-Depend. Mater. 1, 33–49 (1997)

3.72.

S. Sane, W.G. Knauss: The time-dependent bulk response of poly (methyl methacrylate), Mech. Time-Depend. Mater. 5, 293–324 (2001)

3.73.

Z. Ma, K. Ravi-Chandar: Confined compression–a stable homogeneous deformation for multiaxial constitutive characterization, Exp. Mech. 40, 38–45 (2000)

3.74.

K. Ravi-Chandar, Z. Ma: Inelastic deformation in polymers under multiaxial compression, Mech. Time-Depend. Mater. 4, 333–357 (2000)

3.75.

D. Qvale, K. Ravi-Chandar: Viscoelastic characterization of polymers under multiaxial compression, Mech. Time-Depend. Mater. 8, 193–214 (2004)

3.76.

S.J. Park, K.M. Liechti, S. Roy: Simplified bulk experiments and hygrothermal nonlinear viscoelasticty, Mech. Time-Depend. Mater. 8, 303–344 (2004)

3.77.

A. Kralj, T. Prodan, I. Emri: An apparatus for measuring the effect of pressure on the time-dependent properties of polymers, J. Rheol. 45, 929–943 (2001)

3.78.

J.B. Pethica, R. Hutchings, W.C. Oliver: Hardness measurement at penetration depths as small as 20 nm, Philos. Mag. 48, 593–606 (1983)

3.79.

W.C. Oliver, R. Hutchings, J.B. Pethica: Measurement of hardness at indentation depths as low as 20 nanometers. In: Microindentation Techniques in Materials Science and Engineering ASTM STP 889, ed. by P.J. Blau, B.R. Lawn (American Society for Testing and Materials, Philadelphia 1986) pp. 90–108

3.80.

W.C. Oliver, G.M. Pharr: An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments, J. Mater. Res. 7, 1564–1583 (1992)

3.81.

I.N. Sneddon: The relation between load and penetration in the axisymmetric boussinesq problem for a punch of arbitrary profile, Int. J. Eng. Sci. 3, 47–57 (1965)MATHMathSciNet

3.82.

M. Oyen-Tiesma, Y.A. Toivola, R.F. Cook: Load-displacement behavior during sharp indentation of viscous-elastic-plastic materials. In: Fundamentals of Nanoindentation and Nanotribology II, ed. by S.P. Baker, R.F. Cook, S.G. Corcoran, N.R. Moody (Mater. Res. Soc., Warrendale 2000) pp. Q1.5.1–Q1.5.6, MRS Proc. Vol. 649, MRS Fall Meeting, Boston

3.83.

L. Cheng, X. Xia, W. Yu, L.E. Scriven, W.W. Gerberich: Flat-punch indentation of viscoelastic material, J. Polym. Sci. Polym. Phys. 38, 10–22 (2000)

3.84.

H. Lu, B. Wang, J. Ma, G. Huang, H. Viswanathan: Measurement of creep compliance of solid polymers by nanoindentation, Mech. Time-Depend. Mater. 7, 189–207 (2003)

3.85.

G. Huang, B. Wang, H. Lu: Measurements of viscoelastic functions in frequency-domain by nanoindentation, Mech. Time-Depend. Mater. 8, 345–364 (2004)

3.86.

T.C.T. Ting: The contact stresses between a rigid indenter and a viscoelastic half-space, J. Appl. Mech. 33, 845–854 (1966)MATH

3.87.

E.H. Lee, J.R.M. Radok: The contact problem for viscoelastic bodies, J. Appl. Mech. 27, 438–444 (1960)MATHMathSciNet

3.88.

E. Riande, R. Diaz-Calleja, M.G. Prolongo, R.M. Masegosa, C. Salom: Polymer Viscoelasticity-Stress and Strain in Practice (Dekker, New York 2000)

3.89.

J.R.M. Radok: Visco-elastic stress analysis, Q. of Appl. Math. 15, 198–202 (1957)MATHMathSciNet

3.90.

S.C. Hunter: The Hertz problem for a rigid spherical indenter and a viscoelastic half-space, J. Mech. Phys. Solids 8, 219–234 (1960)MATHMathSciNet

3.91.

W.H. Yang: The contact problem for viscoelastic bodies, J. Appl. Mech. 33, 395–401 (1960)

3.92.

S.A. Hutcheson, G.B. McKenna: Nanosphere embedding into polymer surfaces: A viscoelastic contact mechanics analysis, Phys. Rev. Lett. 94, 076103.1–076103.4 (2005)

3.93.

J.H. Teichroeb, J.A. Forrest: Direct imaging of nanoparticle embedding to probe viscoelasticity of polymer surfaces, Phys. Rev. Lett. 91, 016104.1–106104.4 (2003)

3.94.

M.L. Oyen: Spherical indentation creep following ramp loading, J. Mater. Res. 20, 2094–2100 (2005)

3.95.

M.R. VanLandingham, N.K. Chang, P.L. Drzal, C.C. White, S.-H. Chang: Viscoelastic characterization of polymers using instrumented indentation–1. Quasi-static testing, J. Polym. Sci. Polym. Phys. 43, 1794–1811 (2005)

3.96.

J.L. Loubet, B.N. Lucas, W.C. Oliver: Some measurements of viscoelastic properties with the help of nanoindentation, International workshop on Instrumental Indentation, ed. by D.T. Smith (NIST Special Publication, San Diego 1995) pp. 31–34

3.97.

B.N. Lucas, W.C. Oliver, J.E. Swindeman: The dynamic of frequency-specific, depth-sensing indentation testing, Fundamentals of Nanoindentation and Nanotribology, Vol. 522, ed. by N.R. Moody (Mater. Res. Soc., Warrendale 1998) pp. 3–14, MRS Meeting, San Francisco 1998

3.98.

R.J. Arenz, M.L. Williams (Eds.): A photoelastic technique for ground shock investigation. In: Ballistic and Space Technology (Academic, New York 1960)

3.99.

Y. Miyano, T. Tamura, T. Kunio: The mechanical and optical characterization of Polyurethane with application to photoviscoelastic analysis, Bull. JSME 12, 26–31 (1969)

3.100.

A.B.J. Clark, R.J. Sanford: A comparison of static and dynamic properties of photoelastic materialsm, Exp. Mech. 3, 148–151 (1963)

3.101.

O.A. Hasan, M.C. Boyce: A constitutive model for the nonlinear viscoelastic-viscoplastic behavior of glassy polymers, Polym. Eng. Sci. 35, 331–334 (1995)

3.102.

J.S. Bergström, M.C. Boyce: Constitutive modeling of the large strain time-dependent behavior of elastomers, J. Mech. Phys. Solids 46, 931–954 (1998)MATH

3.103.

P.D. Ewing, S. Turner, J.G. Williams: Combined tension-torsion studies on polymers: apparatus and preliminary results for Polyethylene, J. Strain Anal. Eng. 7, 9–22 (1972)

3.104.

C. Bauwens-Crowet: The compression yield behavior of polymethal methacrylate over a wide range of temperatures and strain rates, J. Mater. Sci. 8, 968–979 (1973)

3.105.

L.C. Caraprllucci, A.F. Yee: The biaxial deformation and yield behavior of bisphenol-A polycarbonate: Effect of anisotropy, Polym. Eng. Sci. 26, 920–930 (1986)

3.106.

W.G. Knauss, I. Emri: Non-linear viscoelasticity based on free volume consideration, Comput. Struct. 13, 123–128 (1981)MATH

3.107.

W.G. Knauss, I. Emri: Volume change and the nonlinearly thermo-viscoelastic constitution of polymers, Polym. Eng. Sci. 27, 86–100 (1987)

3.108.

G.U. Losi, W.G. Knauss: Free volume theory and nonlinear thermoviscoelasticity, Polym. Eng. Sci. 32, 542–557 (1992)

3.109.

G.U. Losi, W.G. Knauss: Thermal stresses in nonlinearly viscoelastic solids, J. Appl. Mech. 59, S43–S49 (1992)

3.110.

W.G. Knauss, S. Sundaram: Pressure-sensitive dissipation in elastomers and its implications for the detonation of plastic explosives, J. Appl. Phys. 96, 7254–7266 (2004)

3.111.

R.A. Schapery: A theory of non-linear thermoviscoelasticity based on irreversible thermodynamics, Proc. 5th Natl. Cong. Appl. Mech. (1966) pp. 511–530

3.112.

R.A. Schapery: On the characterization of nonlinear viscoelastic materials, Polym. Eng. Sci. 9, 295–310 (1969)

3.113.

H. Lu, W.G. Knauss: The role of dilatation in the nonlinearly viscoelastic behavior of pmma under multiaxial stress states, Mech. Time-Depend. Mater. 2, 307–334 (1999)

3.114.

H. Lu, G. Vendroux, W.G. Knauss: Surface deformation measurements of cylindrical specimens by digital image correlation, Exp. Mech. 37, 433–439 (1997)

3.115.

W.H. Peters, W.F. Ranson: Digital imaging techniques in experimental stress analysis, Opt. Eng. 21, 427–432 (1982)

3.116.

M.A. Sutton, W.J. Wolters, W.H. Peters, W.F. Ranson, S.R. McNeil: Determination of displacements using an improved digital image correlation method, Im. Vis. Comput. 1, 133–139 (1983)

3.117.

H. Lu: Nonlinear Thermo-Mechanical Behavior of Polymers under Multiaxial Loading. Ph.D. Thesis (California Institute of Technology, Pasadena 1997)

3.118.

D.R. Lide: CRC Handbook of Chemistry and Physics (CRC Press, Boca Raton 1995)

3.119.

G.B. McKenna: On the physics required for prediction of long term performance of polymers and their composites, J. Res. NIST 99(2), 169–189 (1994)

3.120.

P.A. OʼConnell, G.B. McKenna: Large deformation response of polycarbonate: Time-temperature, time-aging time, and time-strain superposition, Polym. Eng. Sci. 37, 1485–1495 (1997)

3.121.

J.L. Sullivan, E.J. Blais, D. Houston: Physical aging in the creep-behavior of thermosetting and thermoplastic composites, Compos. Sci. Technol. 47, 389–403 (1993)

3.122.

I.M. Hodge: Physical aging in polymer glasses, Science 267, 1945–1947 (1995)

3.123.

N. Goldenberg, M. Arcan, E. Nicolau: On the most suitable specimen shape for testing sheer strength of plastics, ASTM STP 247, 115–121 (1958)

3.124.

M. Arcan, Z. Hashin, A. Voloshin: A method to produce uniform plane-stress states with applications to fiber-reinforced materials, Exp. Mech. 18, 141–146 (1978)

3.125.

M. Arcan: Discussion of the iosipescu shear test as applied to composite materials, Exp. Mech. 24, 66–67 (1984)

3.126.

W.G. Knauss, W. Zhu: Nonlinearly viscoelastic behavior of polycarbonate. I. Response under pure shear, Mech. Time-Depend. Mater. 6, 231–269 (2002)

3.127.

W.G. Knauss, W. Zhu: Nonlinearly viscoelastic behavior of polycarbonate. II. The role of volumetric strain, Mech. Time-Depend. Mater. 6, 301–322 (2002)

Titel: Mechanics of Polymers: Viscoelasticity
verfasst von: Wolfgang G. Knauss, Prof.
Igor Emri
Hongbing Lu, Prof.
Verlag: Springer US
Buch: Springer Handbook of Experimental Solid Mechanics
Print ISBN: 978-0-387-26883-5

Electronic ISBN: 978-0-387-30877-7

Copyright-Jahr: 2008
DOI: https://doi.org/10.1007/978-0-387-30877-7_3

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht