nach oben

Erschienen in:

2020 | OriginalPaper | Buchkapitel

Analysis of the Efficiency of Engine Inlet Air Chilling Unit with Cooling Towers

verfasst von : Andrii Radchenko, Andrzej Stachel, Serhiy Forduy, Bohdan Portnoi, Oleksandr Rizun

Erschienen in: Advances in Design, Simulation and Manufacturing III

Verlag: Springer International Publishing

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The processes of cooling air at the inlet of energy installations by exhaust heat conversion chillers with heat removal from them by cooling towers of the circulating cooling system are studied on the example of a gas turbine. Two-stage air cooling is considered using combined type exhaust heat conversion chillers, which utilizes the exhaust gas heat of a gas turbine and which includes absorption lithium-bromide and refrigerant ejector chillers as stages to convert waste heat into cold. The data on current heat loads on exhaust heat conversion chillers and cooling towers in accordance with climatic conditions of operation with the different distribution of heat loads on the cooling towers according to their number was obtained on the base of the results of modeling the operation of the gas turbine cooling complex. It was shown the possibility to increase the fuel saving due to turbine inlet air cooling through decreasing the number of cooling towers and electricity consumption for driving the fans of cooling towers.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel Possibility of Using Liquid-Metals for Gas Turbine Cooling System

Nächstes Kapitel Enhancement of the Operation Efficiency of the Transport Air Conditioning System

Kumar, T.A., Muzaffarul, H.M., Islam, M.: Effect of ambient temperature on the performance of a combined cycle power plant. Trans. Can. Soc. Mech. Eng. 37(4), 1177–1188 (2013)CrossRef

Günnur, Ş.G., et al.: The effect of ambient temperature on electric power generation in natural gas combined cycle power plant-a case study. Energy Rep. 4, 682–690 (2018)CrossRef

Zhang, T., Liu, Z., Hao, H., Chang, L.J.: Application research of intake-air cooling technologies in gas-steam combined cycle power plants in China. Power Energy Eng. 2, 304–311 (2014)CrossRef

Yang, Ch., Yang, Z., Cai, R.: Analytical method for evaluation of gas turbine inlet air cooling in combined cycle power plant. Appl. Energy 86, 848–856 (2009)CrossRef

Elberry, M.F., et al.: Performance improvement of power plants using absorption cooling system. Alexandria Eng. J. 57, 2679–2686 (2018)CrossRef

Mahmoudi, S.M., Zare, V., Ranjbar, F., Farshi, L.: Energy and exergy analysis of simple and regenerative gas turbines inlet air cooling using absorption refrigeration. J. Appl. Sci. 9(13), 2399–2407 (2009)CrossRef

Butrymowicz, D., Gagan, J., Śmierciew, K., Łukaszuk, M., Dudar, A., Pawluczuk, A., Łapiński, A., Kuryłowicz, A.: Investigations of prototype ejection refrigeration system driven by low grade heat. In: HTRSE-2018, E3S Web of Conferences, vol. 70, 03002 (2018)

Elbel, S., Lawrence, N.: Review of recent developments in advanced ejector technology. Int. J. Refrig 62, 1–18 (2016)CrossRef

Radchenko, R., Radchenko, A., Serbin, S., Kantor, S., Portnoi, B.: Gas turbine unite inlet air cooling by using an excessive refrigeration capacity of absorption-ejector chiller in booster air cooler. In: HTRSE-2018, E3S Web of Conferences, vol. 70, 03012 (2018)

10.

Forduy, S., Radchenko, A., Kuczynski, W., Zubarev, A., Konovalov, D.: Enhancing the fuel efficiency of gas engines in integrated energy system by chilling cyclic air. In: Tonkonogyi, V. et al. (eds.) Grabchenko’s International Conference on Advanced Manufacturing Processes. InterPartner 2019. Lecture Notes in Mechanical Engineering, pp. 500–509. Springer, Cham (2020)

11.

Popli, S., Rodgers, P., Eveloy, V.: Trigeneration scheme for energy efficiency enhancement in a natural gas processing plant through turbine exhaust gas waste heat utilization. Appl. Energy 93, 623–636 (2012)CrossRef

12.

Popli, S., Rodgers, P., Eveloy, V.: Gas turbine efficiency enhancement using waste heat powered absorption chillers in the oil and gas industry. Appl. Therm. Eng. 50, 918–931 (2013)CrossRef

13.

Konovalov, D., Kobalava, H.: Efficiency analysis of gas turbine plant cycles with water injection by the Aerothermopressor. In: Ivanov, V., et al. (eds.) Advances in Design, Simulation and Manufacturing II. DSMIE 2019. Lecture Notes in Mechanical Engineering, pp. 581–591. Springer, Cham (2020)

14.

Konovalov, D., Trushliakov, E., Radchenko, M., Kobalava, G., Maksymov, V.: Research of the Aerothermopresor cooling system of charge air of a marine internal combustion engine under variable climatic conditions of operation. In: Tonkonogyi, V., et al. (eds.) Grabchenko’s International Conference on Advanced Manufacturing Processes. InterPartner-2019. Lecture Notes in Mechanical Engineering, pp. 520–529. Springer, Cham (2020)

15.

Yanga, Y., Wangd, B., Zhoue, Q.: Air conditioning system design using free cooling technology and running mode of a data center in Jinan. Procedia Eng. 205, 3545–3549 (2017)CrossRef

16.

Al-Ibrahim, A.M., Varnhamm, A.: A review of inlet air-cooling technologies for enhancing the performance of combustion turbines in Saudi Arabia. Appl. Therm. Eng. 30, 1879–1888 (2010)CrossRef

17.

Radchenko, A., Radchenko, M., Konovalov, A., Zubarev, A.: Increasing electrical power output and fuel efficiency of gas engines in integrated energy system by absorption chiller scavenge air cooling on the base of monitoring data treatment. In: HTRSE-2018, E3S Web of Conferences, vol. 70, 03011 (2018). 6 p

18.

Radchenko, M., Radchenko, R., Ostapenko, O., Zubarev, A., Hrych, A.: Enhancing the utilization of gas engine module exhaust heat by two-stage chillers for combined electricity, heat and refrigeration. In: 5th ICSAI 2018, Jiangsu, China, pp. 240−244 (2019)

19.

Mulyandasari, V.: Cooling tower selection and sizing (engineering design guideline). KLM Technology Group. Practical Engineering Guidelines for Processing Plant Solutions (2011)

20.

Radchenko, A., Bohdal, L., Zongming, Y., Portnoi, B., Tkachenko, V.: Rational designing of gas turbine inlet air cooling system. In: Tonkonogyi, V., et al. (eds.) Grabchenko’s International Conference on Advanced Manufacturing Processes. InterPartner-2019. Lecture Notes in Mechanical Engineering, pp. 591–599. Springer, Cham (2020)

21.

Meteomanz. http://www.meteomanz.com/. Accessed 21 May 2019

22.

SE SPCGTC “Zorya”–“Mashproekt”, Nikolaev gas turbines of industrial application, Publ. (2004). 20 p.

Titel: Analysis of the Efficiency of Engine Inlet Air Chilling Unit with Cooling Towers
verfasst von: Andrii Radchenko
Andrzej Stachel
Serhiy Forduy
Bohdan Portnoi
Oleksandr Rizun
Verlag: Springer International Publishing
Buch: Advances in Design, Simulation and Manufacturing III
Print ISBN: 978-3-030-50490-8

Electronic ISBN: 978-3-030-50491-5

Copyright-Jahr: 2020
DOI: https://doi.org/10.1007/978-3-030-50491-5_31

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht