nach oben

Erschienen in:

2021 | OriginalPaper | Buchkapitel

Prediction of Torque and Cutting Speed of Pedal Operated Chopper for Silage Making

verfasst von : Pravin B. Khope, Sagar D. Shelare

Erschienen in: Advances in Industrial Machines and Mechanisms

Verlag: Springer Singapore

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

This investigation was mainly carried out to develop an efficient power unit for fodder cutting using the energy of humans as a power source. In dairy, the major problem is fodder scarcity in the dry season. The cost of fodder decides the economics of the dairy business. It means that available fodder should be used without any wastage. The available machines of fodder cutting are either electrical motor or hand driven. Yet, today there is an enormous electrical power scarcity approximately everywhere in India. To overcome this, the proposed sustainable fodder cutter driven by the human power unit can provide a better substitute for electrical power-operated cutting units. This fodder cutter can be operated without exhaustion and easily for a more extended time if a hand-driven fodder cutter is supplanted by a pedal-driven. Additionally, the facts confirm that hand muscles are weak as compared to the leg muscle. This human-powered flywheel motor unit was tested under three studied variables namely gear ratio (1:2, 1:3, and 1:4), flywheel speed (300,400, 500, and 600 rpm), and the number of blades (2 and 3).

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel Ergonomic Workstation Design for Welding Operation—A Case Study

Nächstes Kapitel Finite Element Modeling and Parametric Investigation of Friction Stir Welding (FSW)

Jawalekar, S.B., Shelare, S.D.: Development and performance analysis of low cost combined harvester for rabicrops. Agric Eng Int.: CIGR J. 22(1), 197–201 (2020)

Khope, P.B., Modak, J.P.: Design of experimental set-up for establishing empirical relationship for chaff cutter energized by human powered flywheel motor. Int. J. Agric. Technol. 9(4), 779–791 (2013)

Shelare, S.D., Kumar, R., Khope, P.B.: Formulation of a mathematical model for quantity of Deshelled Nut in Charoli Nut Deshelling machine. In: Prakash, C., Krolczyk, G., Singh, S., Pramanik, A. (eds.) Advances in Metrology and Measurement of Engineering Surfaces. Lecture Notes in Mechanical Engineering, pp 89–97. Springer, Singapore (2021)

Waghmare, S.N., Sakhale, C.N., Tembhurkar, C.K., Shelare, S.D.: Assessment of average resistive torque for human-powered stirrup making process. In: Iyer, B., Deshpande, P., Sharma, S., Shiurkar, U. (eds.) Computing in Engineering and Technology. Advances in Intelligent Systems and Computing, vol. 1025, pp. 845–853. Springer, Singapore (2020)CrossRef

Wilson, D.G.: VITA Volunteer: understanding the Pedal Power (1986)

Ghatole, S., Yashpal, Bundele, M., Modak, J.P.: Development of mathematical model for reduction of process time for peddle-driven sewing machine. In: Vasudevan, H., Kottur, V., Raina, A. (eds.) Proceedings of International Conference on Intelligent Manufacturing and Automation. Lecture Notes in Mechanical Engineering. pp. 513–521, Springer, Singapore (2020)

Waghmare, S.N., Shelare, S.D., Tembhurkar, C.K., Jawalekar, S.B.: Development of a model for the number of bends during stirrup making process. In: Prakash, C., Krolczyk, G., Singh, S., Pramanik, A. (eds.) Advances in Metrology and Measurement of Engineering Surfaces. Lecture Notes in Mechanical Engineering, pp. 69–78. Springer, Singapore (2021)

Dhale, A.D., Modak, J.P.: Formulation of experimental data based model for oil press using human powered flywheel motor as energy source. Agric. Eng. Int.: CIGR J. 14(3), 218–229 (2012)

Undirwade, S.K., Singh, M.P., Sakhale, C.N.: Experimental investigation of processing time, number of slivers and resistive torque required for human powered bamboo sliver cutting operation. J. Bamboo Rattan 14(1–4), 33–51 (2015)

10.

Undirwade, S.K., Singh, M.P., Sakhale. C.N.: Formulation of mathematical model for processing time required for bamboo sliver cutting using HPFM. Mater. Today: Proc. 4(9), 10174–10178 (2017)

11.

Khope, P.B., Modak, J.P.: Development and performance evaluation of a human powered flywheel motor operated forge cutter. Int. J. Sci. Technol. Res. 2(3), 146–149 (2013)

12.

Dhande, H.K., Shelare, S.D., Khope, P.B.: Developing a mixed solar drier for improved postharvest handling of food grains. Agric. Eng. Int.: CIGR J. 22(4), 166–173 (2020)

13.

Deshpande, S.B., Modak, J.P., Tarnekar, S.B.: Confirming application of human powered flywheel motor as an energy source for rural generation of electrical energy for rural applications, and computer aided analysis of battery charging process. Hum. Power USA Int. Hum. Power Veh. Assoc. 58, 10–16 (2009)

14.

Dhale, A., Modak, J.P.: Formulation of the approximate generalized data based model for oilseed presser using human powered flywheel motor as an energy source. Int. J. Agric. Eng. 3(2), 354–384 (2010)

15.

Schenk Jr., H.: Test sequence and experimental plans, theories of engineering experimentation. McGraw Hill Book Co., New York (1961)

Titel: Prediction of Torque and Cutting Speed of Pedal Operated Chopper for Silage Making
verfasst von: Pravin B. Khope
Sagar D. Shelare
Verlag: Springer Singapore
Buch: Advances in Industrial Machines and Mechanisms
Print ISBN: 978-981-16-1768-3

Electronic ISBN: 978-981-16-1769-0

Copyright-Jahr: 2021
DOI: https://doi.org/10.1007/978-981-16-1769-0_22

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht