The effect of metastability on room temperature deformation behavior of β and α + β titanium alloys

The deformation behavior of single-phase metastable β-titanium alloys and two-phase α+metastable-β alloys strongly depends on the degree of stability of the β-phase. Recently, it has been shown that the tensile deformation behavior, as well as the creep deformation behavior at low temperatures (<0.25T _m), is strongly influenced by the degree of metastability. For example, the titanium β-alloy Ti–13.0wt%Mn, which has higher stability than the titanium β-alloy Ti–14.8wt%V, deforms by slip only; whereas the latter deforms by slip and twinning. In addition to the mechanical properties, the deformation mechanisms also depend on the degree of metastability. Further, the deformation mechanisms of a given metastable β-alloy depend on whether the β-phase is present by itself as a single-phase alloy, or in the presence of α-phase in the form of a two-phase alloy. For example, it was found that a metastable Ti–V alloy deforms by slip and twinning when it is in the form of a single-phase alloy, but deforms by slip and martensitic transformation when the same metastable β-phase is present in a two-phase α + β alloy. The mechanical properties of the metastable β alloys in turn depend on these deformation mechanisms. These recent developments are reviewed in this article.