nach oben

Journal of Polymer Research

Erschienen in:

01.09.2017 | ORIGINAL PAPER

Copolymers of ε-caprolactam and polypropylene oxide via anionic polymerization: synthesis and properties

verfasst von: Kr. Zhilkova, R. Mateva, M. Kyulavska

Erschienen in: Journal of Polymer Research | Ausgabe 10/2017

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Copolymers with an elastic polypropylene oxide (PPO), middle block in the main chain of poly(ε-caprolactam) were synthesized via activated anionic ring opening polymerization of ε-caprolactam (CL) in the presence of a basic initiator sodium salt of CL (Na-CL) and effective bifunctional polymeric activators (PACs). By varyng the molecular weight, two types of PACs were synthesized based on carbamoyl derivatives of hydroxyl terminated PPO with isophorone diisocyanate and were blocked with CL. The formation of copolymers has been confirmed by proton nuclear magnetic resonance spectroscopy (¹H–NMR) and Fourier transform infrared spectroscopy (FT-IR). The influence of the molecular weight of the PACs, the CL/PAC ratio and polymerization conditions on the conversion, intrinsic viscosity and polymerization kinetics, was investigated. The calorimetric, wide-angle X-ray diffraction (WAXD), thermogravimetric analysis (TGA), notched impact test and dynamic mechanical thermal analysis (DMTA) were performed to estimate the influence of the composition ratio and the type of PACs on the physical, thermal, and mechanical properties of the copolymers. The use of the synthesized PACs reduced the polymerization time to several minutes. The copolymers showed improved impact resistance up to more than two times higher than those of the polyamide 6 (PA-6) homopolymer, without significant changes in their high melting temperatures.

Vorheriger Artikel Triple-shape memory properties of thermoplastic polyurethane/olefin block copolymer/polycaprolactone blends

Nächster Artikel Preparation of random poly(butylene alkylate-co-terephthalate)s with different methylene group contents: crystallization and degradation kinetics

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Udipi K, Dave R, Kruse R, Stebbins L (1997) Polyamides from lactams via anionic ring-opening polymerization: 1. Chemistry and some recent findings. Polymer 38(4):927–938CrossRef

Allen WT, Eaves DE (1977) Caprolactam based block copolymers using polymeric activators. Angew Makromol Chem 58:321–343CrossRef

Boscoletto A, Trezza G, Andreis B, Milan L, Tavan M, Furlan P (1992) Anionic polyamides modified with poly(Oxypropylene) by "one-shot" RIM technology: structural and morphological characterization. Macromolecules 25:5752–5758CrossRef

Chen Y, Chen SA (1993) Bulk anionic copolymerization of ε-caprolactam in the presence of macroactivators derived from polypropylene glycol. J Appl Polym Sci 47:1721–1729CrossRef

Sakurai K, Amador G, Takahashi T (1998) Block copolymers based on nylon 6 and poly(propylene glycol). I. Structure and Thermal Properties. Polymer 39(17):4089–4094CrossRef

Stehlicek J, Sebenda J (1982) Block copolymers of ε-caprolactam and Oxirane prepared by the activated anionic polymerization of ε-caprolactam. Eur Polym J 18:535–540CrossRef

Yu YC, Jo WH (1994) Segmented block Copolyetheramides based on nylon 6 and Polyoxypropylene. I. Synthesis and Characterization. J Appl Polym Sci 54:585–591CrossRef

Yu YC, Jo WH (1995) Segmented block Copolyetheramides based on nylon 6 and Polyoxypropylene. II. Structure and Properties. J Appl Polym Sci 56:895–904CrossRef

Kyulavska M, Bryaskova R, Bozukova D, Mateva R (2014) Synthesis, structure and behavior of new polycaprolactam copolymers based on poly (ethylene oxide)–poly (propylene oxide)–poly (ethylene oxide) macroactivators derived from Pluronic block copolymers. J Polym Res 21(471):1–14

10.

Hergenrother W, Ambrose R (1974) Block polymers from Isocyanate-terminated intermediates. II. Preparation of Butadiene–ε-caprolactam and Styrene–ε-caprolactam Block Polymers. J Polym Sci, Polym Chem Ed 12:2613–2622CrossRef

11.

Novakova V, Sobotik R, Matenova J, Roda J (1996) Polymerization of lactams, 87. Block copolymers of poly(ε-caprolactam) and Polybutadiene prepared by anionic polymerization. Part I: preparation and properties. Angew Makromol Chem 237:123–141CrossRef

12.

Petit D, Jerome R, Teyssie P (1979) Anionic block copolymerization of ε-caprolactam. J Polym Sci: Polym Chem Ed 17:2903–2916

13.

Sobotik R, Strubar R, Roda J (1997) Polymerization of lactams, 88. Copolymers poly(ε-Caprolactam)-Block-Polybutadiene prepared by anionic polymerization, part III. Model polymerizations initiated with potassium salt of ε-caprolactam and accelerated with Isocyanates and their derivatives. Macromol Chem Phys 198:1147–1163CrossRef

14.

Deng X, Liu A, Wang J, Yang J, Li D (2010) Synthesis and characterization of three-arm polyamide 6-polyurethane block copolymer by monomer casting process. Mater Des 31(6):2776–2783CrossRef

15.

Seo SW, Ha SW (1993) Synthesis and characterization of poly(ether urethane)-nylon 6 block copolymer. J Appl Polym Sci 48:833–843CrossRef

16.

Stehlicek J, Chauhan G, Znasikowa M (1992) Preparation of polymeric initiators of the anionic polymerization of lactams from Polyetherdiols. J Appl Polym Sci 46:2169–2175CrossRef

17.

Kim BJ, White JL (2003) Continuous polymerization of lactam–lactone block copolymers in a twin-screw extruder. J. Appl Polym Sci 88:1429–1437CrossRef

18.

Toncheva N, Jerome R, Mateva R (2011) Anionically prepared poly(ε-caprolactam-co-ε-caprolactone) and poly(ε-caprolactam-co-δ-valerolactone) copolymers: thermal and mechanical properties. Eur Polym J 47(2):238–247CrossRef

19.

Rusu G, Rusu E (2013) Evaluation of thermal and mechanical behavior of some anionic polyesteramide copolymers. J Polym Res 20:308CrossRef

20.

Malinová L, Stolinová M, Lubasová D, Martinová L, Brozěk J (2013) Electrospinning of polyesteramides based on ε-caprolactam and ε-caprolactone from solution. Eur Polym J 49:3135–3143CrossRef

21.

Stehlicek J, Sebenda J (1977) Block copolymers polycaprolactam-polystyrene-polycaprolactam prepared by the anionic polymerization of caprolactam. Eur Polym J 13:949–954CrossRef

22.

Petrov P, Jankova K, Mateva R (2003) Polyamide-6-b-polybutadiene block copolymers: synthesis and properties. J Appl Polym Sci 89:711–717CrossRef

23.

Kr Z, Bozukova D, Mateva R (2005) Anionic block copolymerization of hexanelactam and dodecalactam in the presence of a polymeric activator. J Univ Chem Technol Met (Sofia) 40(1):19–24

24.

Mateva R, Kr Z, Zamfirova G, Díaz-Calleja R, Garcia-Bernabé A (2010) Effects of different composition ratio on the dielectric relaxation and dynamic mechanical properties of poly(ω-dodecalactam-co-ε-caprolactam-co-propylene oxide) copolymers. J Polym Sci B Polym Phys 48:2518–2529CrossRef

25.

Coleman M, Lee K, Skrovanek D, Painter P (1986) Hydrogen bonding in polymers. 4. Infrared temperature studies of a simple polyurethane. Macromolecules 19(8):2149–2157CrossRef

26.

Senich G, MacKnight W (1980) Fourier transform infrared thermal analysis of a segmented polyurethane. Macromolecules 13(1):106–110CrossRef

27.

Skrovanek D, Painter P, Coleman M (1986) Hydrogen bonding in polymers. 2. Infrared temperature studies of nylon 11. Macromolecules 19(3):699–705CrossRef

28.

Tanaka T, Yokoyama T, Yamaguchi Y (1968) Quantitative study on hydrogen bonding between urethane compound and ethers by infrared spectroscopy. J Polym Sci part A-1 Polym Chem 6:2137–2152

29.

Brozek J, Marek M, Roda J, Kralicek J (1988) Polymerization of lactams, 81.Anionic polymerization of lactams accelerated with N-iminolactams, 2 ε-caprolactam (6-hexanelactam). Macromol Chem 189:17–27CrossRef

30.

Dimitrov P, Rangelov S, Dworak A, Tsvetanov Ch B (2004) Synthesis and associating properties of poly(ethoxyethylglycidyl ether)/poly(propylene oxide) triblock copolymers. Macromolecules 37:1000–1008CrossRef

31.

Gardlund ZG, Bator MA (1990) In situ polymerization of nylon–polyurea block copolymers. I. Synthesis and characterization. J Appl Polym Sci 40:2027–2035CrossRef

32.

Sebenda J (1968) Alkaline polymerization of caprolactam. XXIX. Mechanism of chain growth in anionic lactam polymerization. J Polym Sci Part C Polym Symp 23:169–174CrossRef

33.

Toncheva-Moncheva N, Jerome R, Mateva R (2016) Impact of the structure of poly(ε-caprolactam) containing polyesteramides on mechanical properties and biodegradation. Polym Degrad Stab 123:170–177CrossRef

34.

Ghosh S, Khastgir D, Bhowmick AK (1998) Effect of block molecular weight on the mechanical and dynamic mechanical properties of segmented polyamide. Polymer 39(17):3967–3975CrossRef

35.

Petrov P, Gancheva V, Philipova T, Velichkova R, Mateva R (2000) Synthesis of nylon-6 triblock copolymers with bifunctional polymeric activators. J Polym Sci A Polym Chem 38:4154–4164CrossRef

36.

Sekiguchi H (1982) In: Evin KJ, Saegusa T (eds) In ring- opening polymerization, vol 2. London, Elsevier,

37.

Gancheva V, Petrov P, Vladimirov N, Velichkova R, Mateva R (2008) Side reactions in the synthesis of triblock copolymers of nylon-6 with telechelic oligomers. Polym Int 57:1075–1078CrossRef

Titel: Copolymers of ε-caprolactam and polypropylene oxide via anionic polymerization: synthesis and properties
verfasst von: Kr. Zhilkova
R. Mateva
M. Kyulavska
Publikationsdatum: 01.09.2017
Verlag: Springer Netherlands
Erschienen in: Journal of Polymer Research / Ausgabe 10/2017
Print ISSN: 1022-9760
Elektronische ISSN: 1572-8935
DOI: https://doi.org/10.1007/s10965-017-1324-2

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 10/2017

Non-cytotoxic poly(amino acid) with excellent thermo-sensitivity from L-lysine and L-aspartic acid as a hydrophobic drug carrier

Preparation of random poly(butylene alkylate-co-terephthalate)s with different methylene group contents: crystallization and degradation kinetics

Fabrication of hydrophilic and hydrophobic site on polypropylene nonwoven for removal of bisphenol a from water: explorations on adsorption behaviors, mechanisms and configurational influence

Disperse-within-disperse patterning on ternary/binary mixed-brush single crystals using polyaniline, polystyrene and poly(methyl methacrylate) grafts

Extraction and purification of Polyhydroxyalkanoates (PHAs): application of Thermoseparating aqueous two-phase extraction

Nano-assembly of intertwining lamellae of opposite bending senses in poly(ethylene oxide) co-crystallizing with poly(p-vinyl phenol)

Premium Partner

Marktübersichten