nach oben

Environmental Earth Sciences

Erschienen in:

01.09.2017 | Thematic Issue

Relationship between density, compressive strength, tensile strength and aggregate properties of andesites from Hungary

verfasst von: Ákos Török, Balázs Czinder

Erschienen in: Environmental Earth Sciences | Ausgabe 18/2017

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Aggregate properties and strength parameters of four andesites from two operating Hungarian quarries of Nógrádkövesd (one lithotype) and Gyöngyössolymos (three lithotypes) are presented in this paper. Air-dry, water-saturated and freeze–thaw subjected specimens were tested on core-drilled cylindrical specimens, and the aggregate properties were also determined from the remaining part of the drilled rock blocks. Tensile strength values rapidly decreased from air-dry to water-saturated and finally to freeze–thaw subjected specimens. Linear relationships between air-dry and water-saturated bulk densities and between UCS and modulus of elasticity were found. Micro-fabric influences strength and aggregate parameters of studied andesites; fine porphyritic andesite has the highest UCS and tensile strength and the best micro-Deval results, while coarser porphyritic andesite has lower strength and aggregate parameters. Test results were compared with previously published rock mechanical data of intermediate and basic igneous rocks. A good exponential correlation was found between micro-Deval and UCS values of this paper and previously published data sets, but there was no indication that micro-Deval values correlate well with Los Angeles values.

Vorheriger Artikel Isotope–geochemical characterization and geothermometrical modeling of Uttarakhand geothermal field, India

Nächster Artikel A transmission electron microscopy (TEM) study of silver nanoparticles associated with mine waste from New Caledonian nickel deposits: potential origins of silver toxicity in a World Heritage Site

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Al-Omari A, Beck K, Brunetaud X, Török Á, Al-Mukhtar M (2015) Critical degree of saturation: a control factor of freeze–thaw damage of porous limestones at Castle of Chambord, France. Eng Geol 185:71–80. doi:10.1016/j.enggeo.2014.11.018 CrossRef

Bayram F (2012) Predicting mechanical strength loss of natural stones after freeze–thaw in cold regions. Cold Reg Sci Technol 83–84:98–102. doi:10.1016/j.coldregions.2012.07.003 CrossRef

Coggan JS, Stead D, Howe JH, Faulks CI (2013) Mineralogical controls on the engineering behavior of hydrothermally altered granites under uniaxial compression. Eng Geol 160:89–102. doi:10.1016/j.enggeo.2013.04.001 CrossRef

Dávid L (1997) A Mátra hegység kőbányászata (Stone mining in Mátra Hills—in Hungarian). Folia Historico Naturalia Musei Matraensis 22:7–24

Dinçer I, Acar A, Çobanoğlu I, Uras Y (2004) Correlation between Schmidt hardness, uniaxial compressive strength and Young’ modulus for andesites, basalts and tuffs. Bull Eng Geol Environ 63:141–148. doi:10.1007/s10064-004-0230-0 CrossRef

Engidasew TA, Barbieri G (2014) Geo-engineering evaluation of Termaber basalt rock mass for crushed stone aggregate and building stone from Central Ethiopia. J Afr Earth Sci 99:581–594. doi:10.1016/j.jafrearsci.2013.11.020 CrossRef

Engin IC (2013) Investigation on the usage of different rock aggregates as abrasive materials in natural stone aging process. Arab J Geosci 6:5043–5054. doi:10.1007/s12517-012-0714-3 CrossRef

Er S, Tugrul A (2016) Estimation of Cerchar abrasivity index of granitic rocks in Turkey by geological properties using regression analysis. Bull Eng Geol Environ 75:1325–1339. doi:10.1007/s10064-016-0853-y CrossRef

Erichsen E, Ulvik A, Sævik K (2011) Mechanical degradation of aggregate by the Los Angeles-, the micro-Deval- and the Nordic test methods. Rock Mech Rock Eng 44:333–337. doi:10.1007/s00603-011-0140-y CrossRef

Ertas B, Topal T (2008) Quality and durability assessments of the armourstones for two rubble mound breakwaters (Mersin, Turkey). Environ Geol 53:1235–1247. doi:10.1007/s00254-007-0712-z CrossRef

Freire-Lista DM, Fort R, Varas-Muriel MJ (2015) Freeze–thaw fracturing in building granites. Cold Reg Sci Technol 113:40–51. doi:10.1016/j.coldregions.2015.01.008 CrossRef

Hoek E, Brown ET (1980) Underground excavations in rock. Institution of Mining and Metallurgy, London, p 527

Hofer V, Bach H, Latal C, Neubauer AC (2013) Impact of geometric and petrographic characteristics on the variability of LA test values for railway ballast. Math Geosci 45:727–752. doi:10.1007/s11004-013-9472-3 CrossRef

Huang S, Chen R, Xia KW (2010) Quantification of dynamic tensile parameters of rocks using a modified Kolsky tension bar apparatus. J Rock Mech Geotech Eng 2:162–168. doi:10.3724/SP.J.1235.2010.00162 CrossRef

Ince I, Fener M (2016) A prediction model for uniaxial compressive strength of deteriorated pyroclastic rocks due to freeze–thaw cycle. J Afr Earth Sci 120:134–140. doi:10.1016/j.jafrearsci.2016.05.001 CrossRef

ISRM (1978) Suggested methods for determining the tensile strength of rock materials. Int J Rock Mech Min Sci 15:99–103CrossRef

ISRM (1979) Suggested methods for determining the uniaxial compressive strength and deformability of rock materials. Int J Rock Mech Min Sci 16:135–140

Johansson E, Miskovsky K, Loorents KJ (2009) Estimation of rock aggregates quality using analyses of drill cuttings. J Mater Eng Perform 18:299–304. doi:10.1007/s11665-008-9284-7 CrossRef

Kahraman S, Toraman OY (2008) Predicting Los Angeles abrasion loss of rock aggregates from crushability index. Bull Mater Sci 31:173–177. doi:10.1007/s12034-008-0030-4 CrossRef

Korkanc M, Tugrul A (2005) Evaluation of selected basalts from the point of alkali–silica reactivity. Cem Concr Res 35:505–512. doi:10.1016/j.cemconres.2004.06.013 CrossRef

Krutilová K, Přikryl R (2015) Relationship between polished stone value (PSV) and Nordic abrasion value (AN) of volcanic rocks. Bull Eng Geol Environ 76:85–99. doi:10.1007/s10064-015-0814-x CrossRef

Marek I, Szabó-Balog A (1988) Qualifications of mass composition characteristics of rocks. Period Polytech Civil Eng 32:227–246

Naeem M, Khalid P, Sanaullah M, ud Din Z (2014) Physio-mechanical and aggregate properties of limestones from Pakistan. Acta Geod Geophys 49:369–380. doi:10.1007/s40328-014-0054-8 CrossRef

Ngan-Tillard D, Haan J, Laughton D, Mulder A, von der Kolff AN (2009) Index test for the degradation potential of carbonate sands during hydraulic transportation. Eng Geol 108:54–64. doi:10.1016/j.enggeo.2009.06.005 CrossRef

Nicksiar M, Martin CD (2013) Crack initiation stress in low porosity crystalline and sedimentary rocks. Eng Geol 154:64–76. doi:10.1016/j.enggeo.2012.12.007 CrossRef

Noszky J (1940) A Cserhát Hegység Földtani Viszonyai. (Geological Characteristics of Cserhát Hills—in Hungarian). Budapest, Stádium Sajtóvállalat Részvénytársaság, p 283

Ozden UA, Topal T (2009) Evaluation of andesite source as armourstone for a rubble mound breakwater (Hisarönü, Turkey). Environ Earth Sci 59:39–49. doi:10.1007/s12665-009-0002-z CrossRef

Paige-Green P (2007) Durability testing of basic crystalline rocks and specification for use as road base aggregate. Bull Eng Geol Environ 66:431–440. doi:10.1007/s10064-007-0088-z CrossRef

Palassi M, Danesh A (2015) Relationships between abrasion/degradation of aggregate, evaluated from various tests and the effect of saturation. Rock Mech Rock Eng 49:2937–2943. doi:10.1007/s00603-015-0869-9 CrossRef

Pang L, Wu S, Zhu J, Wan L (2010) Relationship between petrographical and physical properties of aggregates. J Wuhan Univ Technol Mater Sci Ed 25:678–681. doi:10.1007/s11595-010-0069-0 CrossRef

Prikryl R (2006) Assessment of rock geomechanical quality by quantitative rock fabric coefficients: limitations and possible source of misinterpretations. Eng Geol 87:149–162. doi:10.1016/j.enggeo.2006.05.011 CrossRef

Přikryl R (2001) Some microstructural aspects of strength variations in rocks. Int J Rock Mech Min Sci 38:671–682. doi:10.1016/S1365-1609(01)00031-4 CrossRef

Přikryl R, Török Á, Theodoridou M, Gomez-Heras M, Miskovsky K (2016) Geomaterials in construction and their sustainability: understanding their role in modern society. In: Přikryl R, Török Á, Gomez-Heras M, Miskovsky K, Theodoridou M (eds) Sustainable use of traditional geomaterials in construction practice geological society, vol 416. Special Publications, London, pp 1–22. doi:10.1144/SP416.21

Räisänen M (2004) Relationships between texture and mechanical properties of hybrid rocks from the Jaala–Iitti complex, southeastern Finland. Eng Geol 74:197–211. doi:10.1016/j.enggeo.2004.03.009 CrossRef

Räisänen M, Mertamo M (2004) An evaluation of the procedure and results of laboratory crushing in quality assessment of rock aggregate raw materials. Bull Eng Geol Env 63:33–39. doi:10.1007/s10064-003-0218-1 CrossRef

Rigopoulos I, Tsikouras B, Pomonis P, Hatzipanagiotou K (2011) Microcracks in ultrabasic rocks under uniaxial compressive stress. Eng Geol 117:104–113. doi:10.1016/j.enggeo.2010.10.010 CrossRef

Rigopoulos I, Tsikouras B, Pomonis P, Hatzipanagiotou K (2013) Determination of the interrelations between the engineering parameters of construction aggregates from ophiolite complexes of Greece using factor analysis. Constr Build Mater 49:747–757. doi:10.1016/j.conbuildmat.2013.08.065 CrossRef

Sajtos L, Mitev A (2007) SPSS Kutatási és Adatelemzési Kézikönyv. (SPSS Manual for Research and Induction—in Hungarian). Budapest, Alinea Kiadó, p 404

Siegesmund S, Dürrast H (2014) Physical and mechanical properties of rocks. In: Siegesmund S, Schnetlage R (eds) Stone in architecture. Springer, Berlin, pp 97–224. doi:10.1007/978-3-642-45155-3_3 CrossRef

Siratovich PA, Davidson J, Villeneuve M, Gravley D, Kennedy B, Cole J, Wyering L, Price L (2012) Physical and mechanical properties of the Rotokawa andesite from production wells RK 27_L2, RK 28 and RK 30. In: New Zealand geothermal workshop 2012 Proceedings, pp 19–21

Sonmez H, Tuncay E, Gokceoglu C (2004) Models to predict the uniaxial compressive strength and the modulus of elasticity for Ankara Agglomerate. Int J Rock Mech Min Sci 41:717–729. doi:10.1016/j.ijrmms.2004.01.011 CrossRef

Stastná A, Nekvasilova Z, Přikryl R, Sachalová S (2013) Microscopic examination of alkali-reactive volcanic rocks from the Bohemian Massif (Czech Republic). In: Proceedings of third international conference on sustainable construction materials and technologies. doi:10.13140/2.1.5165.7922

Tan X, Chen W, Yang J, Cao J (2011) Laboratory investigations on the mechanical properties degradation of granite under freeze–thaw cycles. Cold Reg Sci Technol 68:130–138. doi:10.1016/j.coldregions.2011.05.007 CrossRef

Topal T, Acir O (2004) Quality assessment of armourstone for a rubble mound breakwater (Sinpo, Turkey). Environ Geol 46:905–913. doi:10.1007/s00254-004-1102-4 CrossRef

Török Á (2015) Los Angeles and micro-Deval values of volcanic rocks and their use as aggregates, examples from Hungary. In: Lollino G, Manconi A, Guzzetti F, Culshaw M, Bobrowsky P, Luino F (eds) Engineering geology for society and territory, vol 5. Urban geology, sustainable planning and landscape exploitation. Springer, Cham, pp 115–118. doi:10.1007/978-3-319-09048-1_23

Török Á, Vásárhelyi B (2010) The influence of fabric and water content on selected rock mechanical parameters of travertine, examples from Hungary. Eng Geol 115:237–245. doi:10.1016/j.enggeo.2010.01.005 CrossRef

Tugrul A, Zarif IH (1999) Correlation of mineralogical and textural characteristics with engineering properties of selected granitic rocks from Turkey. Eng Geol 51:303–317CrossRef

Ündül Ö (2016) Assessment of mineralogical and petrographic factors affecting petro-physical properties, strength and cracking processes of volcanic rocks. Eng Geol 210:10–22. doi:10.1016/j.enggeo.2016.06.001 CrossRef

Ündül Ö, Amann F, Aysal N, Plötze ML (2015) Micro-textural effects on crack initiation and crack propagation of andesitic rocks. Eng Geol 193:267–275. doi:10.1016/j.enggeo.2015.04.024 CrossRef

Wang D, Wang H, Bu Y, Schulze C, Oeser M (2015) Evaluation of aggregate resistance to wear with Micro-Deval test in combination with aggregate imaging techniques. Wear 338–339:288–296. doi:10.1016/j.wear.2015.07.002 CrossRef

Wang P, Xu J, Liu S, Wang H, Liu S (2016) Static and dynamic mechanical properties of sedimentary rock after freeze–thaw or thermal shock weathering. Eng Geol 210:148–157. doi:10.1016/j.enggeo.2016.06.017 CrossRef

Wong LNY, Maruvanchery V, Liu G (2016) Water effects on rock strength and stiffness degradation. Acta Geotech 11:713–737. doi:10.1007/s11440-015-0407-7 CrossRef

Yavuz H, Altindag R, Sarac S, Ugur I, Sengun N (2006) Estimating the index properties of deteriorated carbonate rocks due to freeze–thaw and thermal shock weathering. Int J Rock Mech Min Sci 43:767–775CrossRef

Yılmaz M, Tugrul A (2012) The effects of different sandstone aggregates on concrete strength. Constr Build Mater 35:294–303. doi:10.1016/j.conbuildmat.2012.04.014 CrossRef

Yılmaz NG, Goktan RM, Kibici Y (2011) Relations between some quantitative petrographic characteristics and mechanical strength properties of granitic building stones. Int J Rock Mech Min Sci 48:506–513. doi:10.1016/j.ijrmms.2010.09.003 CrossRef

Titel: Relationship between density, compressive strength, tensile strength and aggregate properties of andesites from Hungary
verfasst von: Ákos Török
Balázs Czinder
Publikationsdatum: 01.09.2017
Verlag: Springer Berlin Heidelberg
Erschienen in: Environmental Earth Sciences / Ausgabe 18/2017
Print ISSN: 1866-6280
Elektronische ISSN: 1866-6299
DOI: https://doi.org/10.1007/s12665-017-6977-y

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 18/2017

Isotope–geochemical characterization and geothermometrical modeling of Uttarakhand geothermal field, India

Equivalent-linear site response analysis on the site of the historical Trakošćan Castle, Croatia, using HVSR method

Relationship between trace elements and depositional environments in shallow sediments: a case study from Southern Kanto Plain, Central Japan

Hydrogeochemical evaluation of fractured Limestone aquifer by applying a geochemical model in eastern Nile Valley, Egypt

Asbestiform and non-asbestiform morphologies in a talc and vermiculite mine from the province of Córdoba (Argentina): a case study

Assessment of land use land cover change impact on hydrological regime of a basin