nach oben

Russian Journal of Nondestructive Testing

Erschienen in:

01.09.2020 | THERMAL METHODS

Features of Thermal Nondestructive Testing of Impact Damage to Products Made of Polymer Composite Materials

verfasst von: S. L. Chernyshev, M. Ch. Zichenkov, V. I. Golovan, A. M. Zaitsev, E. A. Kaz’min, I. E. Kovalev, A. B. Kornilov, G. A. Kornilov, A. V. Smotrov, A. A. Chernyavskii, A. O. Shustrov

Erschienen in: Russian Journal of Nondestructive Testing | Ausgabe 9/2020

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Abstract—The widespread introduction of polymer composite materials (PCMs) into aviation technology has led to the search and selection of effective methods for nondestructive testing of aircraft structure elements. According to the operating data, one of the main types of accidental damage to aviation equipment is shock effects. Therefore, the problems of detecting such damage to PCM products using thermal nondestructive testing as a promising method and identifying the features of this approach are relevant. In this work, the authors carried out tests on standard samples of materials, structurally similar samples, and the elements of a full-scale aircraft construction. The results of thermal imaging surveys of impact damage to PCM products were analyzed with standard and dedicated software after testing. Suggestions recommended for further research and practical use are formulated.

Vorheriger Artikel Influence of Filler Crystal Sizes on Acoustic Emission Parameters during Tensile Testing of Parts Made of Plasticized HMX

Nächster Artikel Performance Evaluation of Conventional CNN Architectures and Modified ALEXNET for the Classification of Potatoes by Thermal Imaging

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Feigenbaum, Yu.M. and Dubinskii, S.V., Influence of accidental operational damage on the strength and life of the aircraft structure, Nauchn. Vestn. MGTU GA, 2013, no. 187, pp. 83–91.

Breuer, U.P., Requirements, development, and certification process, in Commercial Aircraft Composite Technology, Switzerland: Springer Int. Publ., 2016, ch. 2, pp. 25–42.CrossRef

Maldague, X.P.V., Jones, T.S., Kaplan, H., Marinetti, S., and Prystay, M., Fundamentals of infrared and thermal testing, Part 1. Principles of infrared and thermal testing, in Nondestructive Handbook, Infrared and Thermal Testing, Maldague, X. and Moore, P.O., Tech. Eds., Columbus, Ohio: ASNT Press, 2001, vol. 3, ch. 2, 3rd ed.

Vavilov, V.P., Infrakrasnaya termographiya i teplovoi kontrol’ (Infrared Thermography and Thermal Testing), Moscow: Spektr, 2009.

Upside down: robot for inspection and repairs [electronic resource]. https://www.lufthansa-technik.com/ en/caire-repair-robot. Accessed 18 July, 2020.

Vavilov, V.P., Chulkov, A.O., and Derusova, D.A., Evaluating severity of impact damage in CFRP by determining thermal effusivity and diffusivity, WSEAS Trans.Heat Mass Transfer, 2014, vol. 9, no. 1, pp. 251–260.

Vavilov, V., Chulkov, A., Smotrov, A., Smotrova, S., and Moskovchenko, A., Characterizing impact damage in GFRP/CFRP composites by determining thermal effusivity/diffusivity, Meas. Sci. Technol., 2019, vol. 30, no. 3, p. 034003. https://doi.org/10.1088/1361-6501/ab018eCrossRef

Kul’kov, A.A., Budadin, O.N., and Kozelskaya, S.O., A thermal method and tools for diagnosing the reliability of structures made of composite materials in the process of force loading based on the analysis of dynamic temperature fields, in Tr. 2-i Mezhdunar. konf. “Deformirovanie i razrushenie kompozitsionnykh materialov i konstruktsii” (Proc. 2nd Int. Conf. “Deformation and Failure of Composite Materials and Structures” (DFCMS-2016)) (Moscow, October 18–20, 2016), Moscow: Stolitsa, IMASH RAN, 2016, pp. 69–70.

Syas’ko, V.A., Possibilities of using active thermography methods for operational nondestructive testing of high-tech composite and metal products in the process of their manufacture and operation, in Sb. tr. 2-i Mezhdunar. nauchn.-tekh. konf. “Pribory i metody nerazrushayushchego kontrolya kachestva izdelii i konstruktsii iz kompozitsionnykh i neodnorodnykh materialov” (NKKM-2016) (Proc. 2nd Int. Sci.-Tech. Conf. “Instruments and methods of nondestructive quality control of products and structures made of composite and heterogeneous materials” (NKKM- 2016)) (St. Petersburg, December 7–9, 2016), St. Petersburg: SVEN, 2016, pp. 132–142.

10.

Kovalev, A.V., Matveev, V.I., Koshkin, V.V., and Khizhnyak, S.A., Thermal testing of aircraft structures, MEGA-TECH. New Technol. Ind. Diagn. Saf., 2011, nos. 2–3, pp. 16–22.

11.

Meola, C., Boccardi, S., Boffa, N.D., Ricci, F., and Carlomagno, G.M., Infrared thermography to evaluate impact damaging of composites, in ECCM16—16th Eur. Confer. Composite Mater. (Seville, Spain, June 22–26, 2014).

12.

Meola, C., Carlomagno, G.M., Ricci, F., Lopresto, V., and Caprino, G., Investigation of impact damage in composites with infrared thermography, in 6th NDT Progr., Mazal, P., Ed. (Prague, October 10–12, 2011), 2011, pp. 175–182.

13.

Halliwell, S., NCN Best Practice Guide—Repair of Fibre Reinforced Polymer (FRP) Structures, NetComposites, 2007.

14.

Swiderski, W., Szabra, D., and Szudrowicz, M., Nondestructive testing of composite armours by using IR thermographic method, in Proc. 9th Int. Conf. Quant. InfraRed Thermography—QIRT 2008 (Krakow, Poland, July 2–5, 2008).

15.

Péronnet, E., Pastor, M.-L., Huillery, R., Dalverny, O., Mistou, S., and Welemane, H., Nondestructive investigation of defects in composite structures by three infrared thermographic techniques, in Proc. Int. Conf. Exp. Mech. ICEM 15 (Porto, Portugal, July 22–27, 2012).

16.

Ptaszek, G.S., Investigation and development of transient thermography for detection of disbonds in thermal barrier coating systems, Doctoral (Eng.) Thesis, London: Imp. Coll., 2012.

17.

ALTAIR Software, Version 5, FLIR SYSTEMS, 2008.

18.

Software “Nondestructive testing of aviation and space materials using active quantitative infrared thermography (AQIRT),” Tomsk Polytech. Univ., 2018.

19.

GOST R 53698-2009. Nondestructive testing. Thermal methods. Terms and Definitions.

20.

GOST R ISO 18434-1-2013. Condition monitoring and diagnostics of machines. Thermography. Part 1. General methods (similar to ISO 18434-1: 2008. Condition monitoring and diagnostics of machines—Thermography—Part 1: General procedures).

21.

Kaz’min, E.A. and Vavilov, V.P., Comparison of methods for processing thermal images in thermal nondestructive testing of PCM samples, in Mater. III Otrasl. konf. po izmeritel’noi tekhnike i metrologii dlya issledovanii letatel’nykh apparatov. KIMILA-2018 (Proc. III Ind. Conf. Meas. Eng. Metrol. Aircraft Res. KIMILA-2018), 2048, no. 3, pp. 387–396.

22.

Nondestructive Testing System. Types (Methods) and Technology of Nondestructive Testing. Terms and Definitions. Reference Manual, ser. 28, no. 4, Moscow: NTTs Bezop. Prom-sti Gosgortekhnadzor Ross., 2003.

Titel: Features of Thermal Nondestructive Testing of Impact Damage to Products Made of Polymer Composite Materials
verfasst von: S. L. Chernyshev
M. Ch. Zichenkov
V. I. Golovan
A. M. Zaitsev
E. A. Kaz’min
I. E. Kovalev
A. B. Kornilov
G. A. Kornilov
A. V. Smotrov
A. A. Chernyavskii
A. O. Shustrov
Publikationsdatum: 01.09.2020
Verlag: Pleiades Publishing
Erschienen in: Russian Journal of Nondestructive Testing / Ausgabe 9/2020
Print ISSN: 1061-8309
Elektronische ISSN: 1608-3385
DOI: https://doi.org/10.1134/S1061830920090028

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 9/2020

Hysteretic Characteristic Curve Monitoring and Finite Element Analysis in Nondestructive Testing of Fabricated Foundation Pit

Influence of Filler Crystal Sizes on Acoustic Emission Parameters during Tensile Testing of Parts Made of Plasticized HMX

Detection of Hazardous Liquids Using Microwave Data and Well-Known Classification Algorithms

Estimating the Extent of Exfoliation of Dielectric and Magnetodielectric Coatings with Surface Microwaves

Performance Evaluation of Conventional CNN Architectures and Modified ALEXNET for the Classification of Potatoes by Thermal Imaging

Dual-energy X-ray Imaging in Combination with Automated Threshold Gabor Filtering for Baggage Screening Application

Premium Partner

Marktübersichten