nach oben

Erschienen in:

2014 | OriginalPaper | Buchkapitel

4. Mechanical and Other Related Properties of Tropical Natural Fibre Composites

verfasst von : Mohd Sapuan Salit

Erschienen in: Tropical Natural Fibre Composites

Verlag: Springer Singapore

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

In this chapter, studies on mechanical properties of selected tropical natural fibre reinforced polymer composites are presented. Banana, coconut, kenaf, oil palm, sugar palm, sugarcane and pineapple fibre reinforced polymer composites were the tropical natural fibre composites elaborated in this chapter. Tensile, flexural and impact properties were among the mechanical properties being studied. The effects of various parameters on mechanical properties of tropical natural fibre composites were investigated. These parameters include fibre contents, type of treatment agents, and fibre sizes. A section on fibre-matrix interfacial bonding including fibre treatments is also presented. Brief discussion on water absorption of natural fibre composites is also made available for the readers.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel Biopolymer

Nächstes Kapitel Design and Materials Selection of Tropical Natural Fibre Composites

Abdelmouleh, M., Boufi, S., Belgacem, M.N., Dufresne, A.: Short natural-fibre reinforced polyethylene and natural rubber composites: Effect of silane coupling agents and fibres loading. Compos. Sci. Technol. 67, 1627–1639 (2007)CrossRef

Abu Bakar, M.A., Natarajan, V.D., Kalam, A., Nor Hayati, K.: Mechanical properties of oil palm fibre reinforced epoxy for building short span bridge. In: Proceedings of the 13th International Conference on Experimental Mechanics, Alexandroupolis, Greece, 1–6 July, pp. 97–98 (2007)

Agunsoye, J.O., Aigbodion, V.S.: Bagasse filled recycled polyethylene bio-composites: Morphological and mechanical properties study. Results Phys. 3, 187–194 (2013)CrossRef

Arib, R.M.N., Sapuan, S.M., Ahmad, M.M.H.M., Paridah, M.T., Khairul Zaman, H.M.D.: Mechanical properties of pineapple leaf fibre reinforced polypropylene composites. Mater. Des. 27, 391–396 (2006)CrossRef

ASTM International: ASTM D123-09, Standard Terminology Relating to Textiles. ASTM International, West Conshohocken (2009)

Bachtiar, D.: Mechanical Properties of Alkali-Treated Sugar Palm (Arenga Pinnata) Fibre Reinforced Epoxy Composites, Master of Science Thesis, Universiti Putra Malaysia, Serdang, Selangor, Malaysia (2008)

Bachtiar, D.: Mechanical and Thermal Properties of Short Sugar Palm (Arenga Pinnata Merr.) Fibre-Reinforced High Impact Polystyrene Composites, Ph.D Thesis, Universiti Putra Malaysia, Serdang, Selangor, Malaysia (2012)

Boopalan, M., Niranjanaa, M., Umapathy, M.J.: Study on the mechanical properties and thermal properties of jute and banana fiber reinforced epoxy hybrid composites. Compos. B Eng. 51, 54–57 (2013)CrossRef

Cao, Y., Shibata, S., Fukumoto, I.: Mechanical properties of biodegradable composites reinforced with bagasse fibre before and after alkali treatments. Compos. A Appl. Sci. Manuf. 37, 423–429 (2006)CrossRef

10.

Callister, W.D.: Materials Science and Engineering: An Introduction, 7th edn. Wiley, New York (2007)

11.

El-Shekeil, Y.A., Sapuan, S.M., Abdan, K., Zainudin, E.S.: Influence of fiber content on the mechanical and thermal properties of kenaf fiber reinforced thermoplastic polyurethane composites. Mater. Des. 40, 299–303 (2012)CrossRef

12.

El-Shekeil, Y.A.: Preparation and Characterization of Kenaf Fibre Reinforced Thermoplastic Polyurethane Composites, Ph.D Thesis, Universiti Putra Malaysia, Serdang, Selangor, Malaysia (2012)

13.

Fang, H., Zhang, Y., Deng, J., Rodrigue, D.: Effect of fiber treatment on the water absorption and mechanical properties of hemp fiber/polyethylene composites. J. Appl. Polym. Sci. 127, 942–949 (2012)CrossRef

14.

Fu, S.Y., Feang, X.Q., Lauke, B., Mai, Y.W.: Effects of particle size, particle/matrix interface adhesion and particle loading on mechanical properties of particulate-polymer composites. Compos. B Eng. 39, 933–961 (2008)CrossRef

15.

George, J., Bhagawan, S.S., Thomas, S.: Effect of environment on the properties of low-density polyethylene composites reinforced with pineapple fibres. Compos. Sci. Technol. 58, 1471–1485 (1998)CrossRef

16.

Hanan, A.U.: Effect of Accelerated Weathering on Kenaf-Reinforced High Density Polyethylene Composite, Master of Science Thesis, Universiti Putra Malaysia, Serdang, Selangor, Malaysia (2012)

17.

Ibrahim, M.S.: Physical and Thermomechanical Properties of Oil Palm Ash-Filled Unsaturated Polyester Composites, Master of Science Thesis, Universiti Putra Malaysia, Serdang, Selangor, Malaysia (2012)

18.

Ibrahim, A.H.: Effects of Flame-Retardant Agents on Mechanical Properties and Flammability of Impregnated Sugar Palm Fibre-Reinforced Polymer Composites, Master of Science Thesis, Universiti Putra Malaysia, Serdang, Selangor, Malaysia (2013)

19.

Inai, N.H.: Mechanical and Physical Properties of Hybrid Banana Pseudostem/Glass Fibre Reinforced Polyester Composites, Master of Science Thesis, Universiti Putra Malaysia, Serdang, Selangor, Malaysia (2013)

20.

Ishak, M.R.: Mechanical Properties of Treated and Untreated Woven Sugar Palm Fibre-Reinforced Unsaturated Polyester Composites, Master of Science Thesis, Universiti Putra Malaysia, Serdang, Selangor, Malaysia (2009)

21.

Ishak, M.R.: Enhancement of Physical Properties of Sugar Palm (Arenga Pinnata Merr.) Fibre-Reinforced Unsaturated Polyester Composites Via Vacuum Resin Impregnation, Ph.D Thesis, Universiti Putra Malaysia, Serdang, Selangor, Malaysia (2012)

22.

Ishak, M.R., Sapuan, S.M., Leman, Z., Rahman, M.Z.A., Anwar, U.M.K. Siregar, J.P.: Sugar palm (Arenga pinnata): its fibres, polymers and composites. Carbohydr. Polym. 91, 699–710 (2013)

23.

Jawaid, M., Abdul Khalil, H.P.S., Abu Bakar, A., Hassan, A., Dungani, R.: Effect of jute fibre loading on the mechanical and thermal properties of oil palm–epoxy composites. J. Compos. Mater. 47, 1633–1641 (2012)

24.

Joseph, S., Sreekala, M.S., Oommen, Z., Koshy, P., Thomas, S.: A comparison of the mechanical properties of phenol formaldehyde composites reinforced with banana fibres and glass fibres. Compos. Sci. Technol. 62, 1857–1868 (2002)CrossRef

25.

Jusoh, S.M.: A Case Study on Tensile Properties and Morphology of Arenga Pinnata Fiber Reinforced Epoxy Composites, Master of Science Thesis, Universiti Putra Malaysia, Serdang, Selangor, Malaysia (2006)

26.

Khairiah, B., Khairul, A.M.A.: Biocomposites from oil palm resources. J. Oil Palm Res. (Special Issue), 103–113 (2006)

27.

Lai, C.Y.: Mechanical Properties and Dielectric Constant of Coconut Coir-Filled Propylene, Master of Science Thesis, Universiti Putra Malaysia, Serdang, Selangor, Malaysia (2004)

28.

Leman, Z.: Mechanical Properties of Sugar Palm Fibre-Reinforced Epoxy Composites, Ph.D Thesis, Universiti Putra Malaysia, Serdang, Selangor, Malaysia (2009)

29.

Liu, W., Misra, M., Askeland, P., Drzal, L.T., Mohanty, A.K.: ‘Green’ composites from soy based plastic and pineapple leaf fiber: fabrication and properties evaluation. Polymer 46, 2710–2721 (2005)CrossRef

30.

Mariatti, J., Abdul Khalil, H.P.S.: Properties of bagasse fibre-reinforced unsaturated polyester (USP) composites. In: Sapuan, S.M. (ed.) Research on Natural Fbre Reinforced Polymer Composites, pp. 63–83. UPM Press, Serdang (2009)

31.

Morandim-Giannetti, A.A., Agnelli, J.A.M., Lancas, B., Magnabosco, R., Casarin, S.A., Bettini, S.H.P.: Lignin as additive in polypropylene/coir composites: Thermal, mechanical and morphological properties. Carbohydr. Polym. 87, 2563–2568 (2012)CrossRef

32.

Mohamed, A.R.: Physical, Mechanical and Thermal Properties of Pineapple Leaf Fibers (PALF) and PALF-Reinforced Vinyl Ester Composites, Ph.D Thesis, Universiti Putra Malaysia, Serdang, Selangor, Malaysia (2010)

33.

Mir, S.S., Nafsin, N., Hasan, M., Hasan, N., Hassan, A.: Improvement of physico-mechanical properties of coir polypropylene biocomposites by fibre chemical treatment. Mater. Des. 52, 251–257 (2013)CrossRef

34.

Rashdi, A.A.A.: Moisture Absorption Capacity of Kenaf Fibre-Reinforced Unsaturated Polyester Composites and Its Effect on Their Mechanical Properties, Ph.D Thesis, Universiti Putra Malaysia, Serdang, Selangor, Malaysia (2010)

35.

Rezali, K.A.M.: Mechanical Properties of Untraeted and Alkaline Treated-kenaf and Ramie-Fabric Reinforced Epoxy Composites, Master of Science Thesis, Universiti Putra Malaysia, Serdang, Selangor, Malaysia (2008)

36.

Rozman, H.D., Ahmadhilmi, K.R., Abubakar, A.: Polyurethane (PU)—oil palm empty fruit bunch (EFB) composites: the effect of EFBG reinforcement in mat form and isocyanate treatment on the mechanical properties. Polym. Testing 23, 559–565 (2004)CrossRef

37.

Russo, P., Carfagna, C., Cimino, F., Acierno, D., Persico, P.: Biodegradable composites reinforced with kenaf fibers: Thermal, mechanical, and morphological issues. Adv. Polym. Technol. 32, 313–322 (2013)CrossRef

38.

Sahari, J.: Physio-Chemical and Mechanical Properties of Different Morphological Parts of Sugar Palm Fibre Reinforced Polyester Composites, Master of Science Thesis, Universiti Putra Malaysia, Serdang, Selangor, Malaysia (2011)

39.

Sahari, J., Sapuan, S.M., Zainudin, E.S., Maleque, M.A.: Mechanical and thermal properties of environmentally friendly composites derived from sugar palm tree. Mater. Des. 49, 285–289 (2013)CrossRef

40.

Sapuan, S.M., Harimi, M., Maleque, M.A.: Mechanical properties of epoxy/coconut shell filler particle composites. Arab. J. Sci. Eng. 28, 171–181 (2003)

41.

Sapuan, S.M., Zan, M.N.M., Zainudin, E.S., Arora, P.R.: Tensile and flexural strengths of coconut spathe-fibre reinforced epoxy composites. J. Trop. Agric. 43, 63–65 (2005)

42.

Sapuan, S.M., Leenie, A., Harimi, M., Beng, Y.K.: Mechanical properties of woven banana fibre reinforced epoxy composites. Mater. Des. 27, 689–693

43.

Sapuan, S.M., Siregar, J.P.: Mechanical properties of pineapple leaf fibre reinforced high impact polystyrene composites. In: Proceedings of the 20th Australasian Conference on the Mechanics of Structures and Materials, Toowoomba, Australia, 2–5 Dec 2008, pp. 295–299 (2008)

44.

Sapuan, S.M., Pua, F., El-Shekeil, Y.A., AL-Oqla, F.N.: Mechanical properties of soil buried kenaf fibre reinforced thermoplastic polyurethane composites. Mater. Des. 50, 467–470 (2013)

45.

Shackelford, J.F.: Introduction to Materials Science and Engineers, 7th edn. Pearson Education Inc., Upper Saddle River (2009)

46.

Siregar, J.P.: Tensile and Flexural Properties of Arenga Pinnata Filament (Ijuk Filament) Reinforced Epoxy Composites, Master of Science Thesis, Universiti Putra Malaysia, Serdang, Selangor, Malaysia (2005)

47.

Siregar, J.P., Sapuan, S.M.: The effect of compatabilizing agents on mechanical properties of pineapple leaf fibre (PALF) reinforced high impact polystyrene composites. Int. J. Polym. Technol. 3, 8185 (2011)

48.

Siregar, J.P.: Effects of Selected Treatments on Properties of Pineapple Leaf Fibre Reinforced High Impact Polystyrene Composites, Ph.D Thesis, Universiti Putra Malaysia, Serdang, Selangor, Malaysia (2011)

49.

Stael, G.C., Tavares, M.I.B., d’Almeida, J.R.M.: Impact behavior of sugarcane bagasse waste–EVA composites. Polym. Testing 20, 869–872 (2001)

50.

Threepopnatkul, P., Kaerkitcha, N., Athipongarporn, N.: Effect of surface treatment on performance of pineapple leaf fiber–polycarbonate composites. Compos. B Eng. 40, 628–632 (2009)

51.

Uma Devi, L., Bhagawan, S.S., Thomas, S.: Mechanical properties of pineapple leaf fiber reinforced polyester composites. J. Appl. Polym. Sci. 64, 1739–1748 (1997)CrossRef

52.

Vallejos, M.E., Curvelo, A.A.S., Teixeira, E.M., Mendes, F.M., Carvalho, A.J.F., Felissia, F.E., et al.: Composite materials of thermoplastic starch and fibers from the ethanol–water fractionation of bagasse. Ind. Crops Prod. 33, 739–746 (2011)CrossRef

53.

Venkateshwaran, N., Perumal, A.E., Alavudeen, A., Thiruchitrambalam, M.: Mechanical and water absorption behaviour of banana/sisal reinforced hybrid composites. Mater. Des. 32, 4017–4021 (2011)CrossRef

54.

Wambua, P., Ivens, J., Verpoest, I.: Natural fibres: can they replace glass in the fibre reinforced plastics? Compos. Sci. Technol. 63, 1259–1264 (2003)CrossRef

55.

Wirawan, R.: Thermo-Mechanical Properties of Sugarcane Bagasse-Filled Poly(vinyl Chloride) Composites, Ph.D Thesis, Universiti Putra Malaysia, Serdang, Selangor, Malaysia (2011)

56.

Wirawan, R., Sapuan, S.M., Yunus, R., Abdan, K.: The effects of thermal history on tensile properties of poly(vinyl chloride) and its composite with sugarcane bagasse. J. Thermoplast. Compos. Mater. 24, 567–579 (2011)CrossRef

57.

Xie, Y., Hill, C.A.S., Xiao, Z., Militz, H., Mai, C.: Silane coupling agents used for natural fiber/polymer composites: a review. Compos. A Appl. Sci. Manuf. 41, 806–819 (2010)CrossRef

58.

Yusoff, M.Z.M.: Mechanical Properties of Oil Palm Fibre-Thermoset Composites, Master of Science Thesis, Universiti Putra Malaysia, Serdang, Selangor, Malaysia (2009)

59.

Zainudin, E.S., Sapuan, S.M., Abdan, K., Mohamad, M.T.M.: Mechanical properties of compression moulded banana pseudo-stem filled unplasticized polyvinyl chloride (uPVC) composites. Polym. Plast. Technol. Eng. 48, 97–101 (2008)CrossRef

Titel: Mechanical and Other Related Properties of Tropical Natural Fibre Composites
verfasst von: Mohd Sapuan Salit
Verlag: Springer Singapore
Buch: Tropical Natural Fibre Composites
Print ISBN: 978-981-287-154-1

Electronic ISBN: 978-981-287-155-8

Copyright-Jahr: 2014
DOI: https://doi.org/10.1007/978-981-287-155-8_4

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht