Metallurgist 3-4/2011

01.07.2011

Reducing the aerodynamic noise of pneumatic nozzles in the pneumatic mechanisms of forges and presses

Yu. V. Ivanov

01.07.2011

Promising raw materials for the production of pulverized-coal fuel

M. B. Shkoller

01.07.2011

New types of unfavorable nonmetallic inclusions based on MgO–Al2O3 and metallurgical factors governing their content in metal. Part 2. Transformation mechanisms for nonmetallic inclusions based on alumina magnesia spinel. Main approaches making it possible to reduce the content of the inclusions in question in steel

A. I. Zaitsev, I. G. Rodionova, G. V. Semernin, N. G. Shaposhnikov, A. Yu. Kazankov

01.07.2011

Analysis of the formation of the solidifying skin of a round continuous-cast semifinished product inside the sleeve of the mold

B. A. Sivak, G. I. Nikolaev, A. S. Smolyakov, S. I. Shakhov

01.07.2011

Study of the temperature fields in the mold of a horizontal continuous caster

J. Bast, S. M. Gorbatyuk, I. Yu. Kryukov

01.07.2011

Studies of the rolling of ribbed bars using the deform software package

I. I. Nekrasov, A. P. Karamyshev, V. S. Parshin, A. A. Fedulov

01.07.2011

New approach to the development of high-strength structural steels with ultimate strength of 1350 MPa or more

V. N. Nikitin, A. P. Shlyamnev, M. V. Nikitin, M. N. Pankova

01.07.2011

Fracture of the materials and elements of steel structures

L. I. Gladshtein

01.07.2011

Scientific foundation for the production of carbothermal manganese alloys

V. I. Gusev, V. Ya. Khrolenko, A. L. Sysolyatin, A. Yu. Zilberman, D. V. Kravchenko

01.07.2011

Powder materials for components operating under impact-abrasive wear conditions

B. G. Gasanov, P. V. Sirotin

01.07.2011

Hot and cold shaping of materials by a fluid at superhigh pressure

V. M. Lugovskoy, G. Danieli

01.07.2011

Calculation of the impact of the explosion of hydrogen–air mixtures on the safety devices of a vacuum-arc furnace used to produce titanium

A. S. Mazur, I. G. Yankovskii, A. A. Kozlov, T. V. Ukraintseva

01.07.2011

Materials and examples of preparing damascus type blade steel

S. Ch. Pyasetskii, Yu. M. Belov

01.07.2011

New methods of increasing the activity of limestone in preparation for sintering

D. R. Ganin, A. A. Panychev

01.07.2011

Aspects of the practical use of VNIIMT methodology to optimize the heat-engineering schemes employed on conveyor-type roasting machines

A. A. Butkarev

01.07.2011

Phosphorus, lead, and arsenic in blast-furnace smelting

P. I. Chernousov, O. V. Golubev, A. L. Petelin

01.07.2011

Production of steel of grade EI654-Sh with a limitation of the ferrite content

O. B. Burgacheva, Yu. N. Shelgaev, N. V. Kostyleva, L. L. Ponomareva, S. S. Ivanov

01.07.2011

Integrated approach to maintaining the temperature regime on continuous hot-strip mills

V. V. Chashchin

01.07.2011

Calculation of alkaline earth metal solubility in iron-carbon melts

E. A. Chichkarev

01.07.2011

Comparison of the parameters of ferrosilicon-smelting furnaces with different electrode spacings

A. P. Shkirmontov

01.07.2011

Force parameters in the extrusion of tubes from a centrifugally cast semifinished product of steel 08Kh18N10T

B. V. Barichko, A. V. Vydrin, Ya. I. Kosmatskii, V. B. Voskhodov, A. M. Zubkov

01.07.2011

Finding an efficient shape for the cross section of the front end of a tubular semifinished product to perform drawing

A. P. Karamyshev, I. I. Nekrasov, V. S. Parshin, A. I. Pugin

01.07.2011

Fracture of the materials and elements of steel structures

L. I. Gladshtein

01.07.2011

Preparation of wear-resistant powder materials based on iron by hot stamping in the presence of a liquid phase

R. V. Batienkov, V. Yu. Dorofeev, Zh. V. Eremeeva, V. V. Artemov

01.07.2011

Design and processing of MoSi2/316L gradient materials

C. M. Zhang, L. W. Lu, W. G. Qin

01.07.2011

Investigation of the completeness of specimen degassing in an analysis of the hydrogen content of aluminum alloys

A. M. Polyanskii, V. A. Polyanskii, Yu. A. Yakovlev

Springer Professional

Inhaltsverzeichnis (26 Artikel)

Reducing the aerodynamic noise of pneumatic nozzles in the pneumatic mechanisms of forges and presses

Promising raw materials for the production of pulverized-coal fuel

Analysis of the formation of the solidifying skin of a round continuous-cast semifinished product inside the sleeve of the mold

Study of the temperature fields in the mold of a horizontal continuous caster

Studies of the rolling of ribbed bars using the deform software package

New approach to the development of high-strength structural steels with ultimate strength of 1350 MPa or more

Fracture of the materials and elements of steel structures

Scientific foundation for the production of carbothermal manganese alloys

Powder materials for components operating under impact-abrasive wear conditions

Hot and cold shaping of materials by a fluid at superhigh pressure

Calculation of the impact of the explosion of hydrogen–air mixtures on the safety devices of a vacuum-arc furnace used to produce titanium

Materials and examples of preparing damascus type blade steel

New methods of increasing the activity of limestone in preparation for sintering

Aspects of the practical use of VNIIMT methodology to optimize the heat-engineering schemes employed on conveyor-type roasting machines

Phosphorus, lead, and arsenic in blast-furnace smelting

Production of steel of grade EI654-Sh with a limitation of the ferrite content

Integrated approach to maintaining the temperature regime on continuous hot-strip mills

Calculation of alkaline earth metal solubility in iron-carbon melts

Comparison of the parameters of ferrosilicon-smelting furnaces with different electrode spacings

Force parameters in the extrusion of tubes from a centrifugally cast semifinished product of steel 08Kh18N10T

Finding an efficient shape for the cross section of the front end of a tubular semifinished product to perform drawing

Fracture of the materials and elements of steel structures

Preparation of wear-resistant powder materials based on iron by hot stamping in the presence of a liquid phase

Design and processing of MoSi2/316L gradient materials

Investigation of the completeness of specimen degassing in an analysis of the hydrogen content of aluminum alloys

Aktuelle Ausgaben

Ausgabe 1-2/2022

Ausgabe 11-12/2022

Ausgabe 9-10/2022

Ausgabe 7-8/2021

Ausgabe 5-6/2021

Ausgabe 3-4/2021

Ausgabe 1-2/2021

Ausgabe 11-12/2021

Ausgabe 9-10/2021

Ausgabe 7-8/2020

Premium Partner

Marktübersichten