Metallurgist 7-8/2019

01.11.2019

Metallurgist Volume 63, Number 7

05.12.2019

Melting of High-Nitrogen Austenitic Steels at Atmospheric Pressure

O. S. Muradyan, S. O. Muradyan

30.11.2019

Development and Implementation of a Device for the Separation of Metal and Slag During Tundish Filling

F. B. Zhautikov, A. Z. Isagulov, B. A. Zhautikov, V. I. Romanov, A. A. Babenko

02.12.2019

Investigation of the Effect of Whisker-Defect Size in Strip Plate from a Two-High Reversing Stand on Round-Billet Surface Quality

E. N. Smirnov, V. A. Sklyar, A. N. Smirnov, V. A. Belevitin, G. A. Orlov

01.12.2019

Increasing the Service Life of Continuous Rolling Mill Mandrels

D. O. Struin, V. A. Toporov, O. A. Panasenko, A. G. P’yankov, K. P. P’yankov, E. A. Shkuratov

30.11.2019

Improvement of the Axial Adjustment of the Equipment of Fine Quality Mill on the Basis of Contactless Measuring 3D Systems

O. A. Panasenko, E. A. Shkuratov, O. I. Belov, A. G. P’yankov, K. P. P’yankov, D. O. Struin, I. N. Chernykh, O. E. Sarafanova

01.12.2019

Development of an Import-Replacing Technology Aimed at Manufacturing Mandrels Маde of X35CrMoV05KU-UNI 2955 Steel for Tubular Mills

N. A. Khlyamkov, N. Yu. Zhidyaeva, Yu. M. Markova, S. N. Kuznetsov

01.12.2019

Managing Structure and Properties of Pipe Steel Alloyed with Chromium in the Process of Cooling After Thermomechanical Rolling

M. Yu. Matrosov, A. A. Kichkina, S. V. Golovin, L. I. Éfron, D. A. Ringinen, E. V. Shul’ga, V. I. Il’inskii

01.12.2019

Effect of Non-Metallic Inclusion Chemical and Phase Composition on Corrosion Resistance of Carbon and Low Alloy Steels in Water Media Typical for Oilfield Pipeline Operating Conditions

A. V. Amezhnov, I. G. Rodionova

30.11.2019

Use of Alumina Production Waste Red Mud During Molten Sulfur-Containing Slag Granulation

A. B. Lebedev, V. A. Utkov, V. Yu. Bazhin

02.12.2019

Synthesis in a High-Energy Planetary Mill of Granules Based Onaluminum Alloy Containing Nanocrystalline Graphite

A. V. Aborkin, A. I. Elkin, V. V. Ryabkova, M. I. Alymov

01.12.2019

Comparative Study of Pseudo-α and Pseudo-β Class Titanium Alloy Sheet Set of High-Tech Properties

N. A. Nochovnaya, A. A. Shiryaev

30.11.2019

Structure, Phase Composition and Mechanical Properties of Hot-Extruded Ti–3Al–2.5V Pipe After Vacuum Annealing

I. Yu. Pyshmintsev, Ya. I. Kosmatskii, E. A. Gornostaeva, A. G. Illarionov, F. V. Vodolazskii, P. S. Radaev, M. S. Karabanalov

03.12.2019

Determination of Optimum Production Parameters for Depletion of Balkhash Copper-Smelting Plant Dump Slags

B. K. Kenzhaliev, S. A. Kvyatkovskii, S. M. Kozhakhmetov, L. V. Sokolovskaya, É. B. Kenzhaliev, A. S. Semenova

30.11.2019

Features of Diffusion Interaction in Steel-Aluminum Composite After Explosive Welding and Aluminizing by Melt Immersion

V. G. Shmorgun, O. V. Slautin, V. P. Kulevich

01.11.2019

Metallurgist Volume 63, Number 8

01.12.2019

Application of Computer-Based Training Software Systems for Upgrade Training of the Process Personnel of Blast Furnace Shops

S. V. Filatov, A. I. Dagman, S. V. Myasoedov, S. A. Zagainov, L. Yu. Gileva

02.12.2019

Nitriding of Molten Chromium-Manganese Steels

L. A. Smirnov, O. V. Zayakin, V. I. Zhuchkov, A. S. Oryshchenko, G. Yu. Kalinin, D. S. Shul’min

01.12.2019

Development of the Metal Temperature Prediction Model for Steel-pouring and Tundish Ladles Used at the Casting and Rolling Complex

S. A. Botnikov, O. S. Khlybov, A. N. Kostychev

02.12.2019

Heat Exchange in the Granulation Chamber of an Installation for Slag Dry Granulation

S. V. Lukin, N. I. Shestakov, E. M. Il’icheva

30.11.2019

Effect of Degree of Oxidation and Element Form in Vanadium Slag on Its Treatment Production Capacity

A. I. Volkov, U. A. Kologrieva, A. I. Kovalev, D. L. Vainshtein

30.11.2019

Effect of Continuous Casting Production Parameters on Main Ingot Formation Parameters

V. I. Dozhdikov, N. V. Cherkasov, A. Yu. Vasyutin

01.12.2019

Optimization of the Gap Parameters of Supporting Rollers of Curvilinear Continuous Casting Machine

D. I. Gabelaya, Z. K. Kabakov

01.12.2019

Control of metal heat treatment process in a furnace using a diagnostic system based on batch heat capacity

A. B. Biryukov, A. A. Ivanova

30.11.2019

Computer Simulation of the Cooling System for Rollers of the Finishing Stand of a Wide-Strip Hot-Rolling Mill and the Development of a New Scheme of Cooling

S. M. Gorbatyuk, S. P. Romanov, I. G. Morozova

30.11.2019

Investigation of the Conditions of Formation of Aluminum-Magnesium Spinel Inclusions in Low-Carbon Automotive Sheet Steels of 08Yu type and Ultralow-Carbon Automotive Sheet Steels of the if and IF-HS Types

A. I. Zaitsev, A. V. Koldaev, A. B. Stepanov, A. V. Amezhnov, S. F. Dunaev

30.11.2019

Increase in Impact Strength During Bainite Structure Formation In HY-TUF High-Strength Steel

M. V. Maisuradze, Yu. V. Yudin, A. A. Kuklina

02.12.2019

Investigation of Solid Residues Obtained After Oxidized Nickel Ore Leaching

B. D. Khalezov, A. S. Gavrilov, S. A. Petrova, S. Yu. Mel’chakov

02.12.2019

Application of Sulfide Copper Ores Oxidizing Roasting Products as Sulfidizing Agent During Melting Nickel Raw Materials To Matte

E. N. Selivanov, A. M. Klyushnikov, R. I. Gulyaeva

30.11.2019

Vacuum Induction Furnace Melting Technology for High-Temperature Composite Material Based on Nb–Si System

P. G. Min, V. E. Vadeev

30.11.2019 | Correction

Correction to: Technology for Production of Monodisperse Spherical Granules

V. B. Ankudinov, Yu. A. Marukhin, V. P. Ogorodnikov, V. A. Ryzhkov

Springer Professional

Inhaltsverzeichnis (31 Artikel)

Metallurgist Volume 63, Number 7

Melting of High-Nitrogen Austenitic Steels at Atmospheric Pressure

Development and Implementation of a Device for the Separation of Metal and Slag During Tundish Filling

Investigation of the Effect of Whisker-Defect Size in Strip Plate from a Two-High Reversing Stand on Round-Billet Surface Quality

Increasing the Service Life of Continuous Rolling Mill Mandrels

Improvement of the Axial Adjustment of the Equipment of Fine Quality Mill on the Basis of Contactless Measuring 3D Systems

Development of an Import-Replacing Technology Aimed at Manufacturing Mandrels Маde of X35CrMoV05KU-UNI 2955 Steel for Tubular Mills

Managing Structure and Properties of Pipe Steel Alloyed with Chromium in the Process of Cooling After Thermomechanical Rolling

Effect of Non-Metallic Inclusion Chemical and Phase Composition on Corrosion Resistance of Carbon and Low Alloy Steels in Water Media Typical for Oilfield Pipeline Operating Conditions

Use of Alumina Production Waste Red Mud During Molten Sulfur-Containing Slag Granulation

Synthesis in a High-Energy Planetary Mill of Granules Based Onaluminum Alloy Containing Nanocrystalline Graphite

Comparative Study of Pseudo-α and Pseudo-β Class Titanium Alloy Sheet Set of High-Tech Properties

Structure, Phase Composition and Mechanical Properties of Hot-Extruded Ti–3Al–2.5V Pipe After Vacuum Annealing

Determination of Optimum Production Parameters for Depletion of Balkhash Copper-Smelting Plant Dump Slags

Features of Diffusion Interaction in Steel-Aluminum Composite After Explosive Welding and Aluminizing by Melt Immersion

Metallurgist Volume 63, Number 8

Application of Computer-Based Training Software Systems for Upgrade Training of the Process Personnel of Blast Furnace Shops

Nitriding of Molten Chromium-Manganese Steels

Development of the Metal Temperature Prediction Model for Steel-pouring and Tundish Ladles Used at the Casting and Rolling Complex

Heat Exchange in the Granulation Chamber of an Installation for Slag Dry Granulation

Effect of Degree of Oxidation and Element Form in Vanadium Slag on Its Treatment Production Capacity

Effect of Continuous Casting Production Parameters on Main Ingot Formation Parameters

Optimization of the Gap Parameters of Supporting Rollers of Curvilinear Continuous Casting Machine

Control of metal heat treatment process in a furnace using a diagnostic system based on batch heat capacity

Computer Simulation of the Cooling System for Rollers of the Finishing Stand of a Wide-Strip Hot-Rolling Mill and the Development of a New Scheme of Cooling

Investigation of the Conditions of Formation of Aluminum-Magnesium Spinel Inclusions in Low-Carbon Automotive Sheet Steels of 08Yu type and Ultralow-Carbon Automotive Sheet Steels of the if and IF-HS Types

Increase in Impact Strength During Bainite Structure Formation In HY-TUF High-Strength Steel

Investigation of Solid Residues Obtained After Oxidized Nickel Ore Leaching

Application of Sulfide Copper Ores Oxidizing Roasting Products as Sulfidizing Agent During Melting Nickel Raw Materials To Matte

Vacuum Induction Furnace Melting Technology for High-Temperature Composite Material Based on Nb–Si System

Correction to: Technology for Production of Monodisperse Spherical Granules

Aktuelle Ausgaben

Ausgabe 1-2/2022

Ausgabe 11-12/2022

Ausgabe 9-10/2022

Ausgabe 7-8/2021

Ausgabe 5-6/2021

Ausgabe 3-4/2021

Ausgabe 1-2/2021

Ausgabe 11-12/2021

Ausgabe 9-10/2021

Ausgabe 7-8/2020

Premium Partner

Marktübersichten