Ausgabe 2/2011
Inhalt (26 Artikel)
Identification of dynamic ferrite formed during the deformation of super-cooled austenite by image-based analysis of an EBSD map
Yong Min Kim, Tae-Hong Ahn, Kwang Kyun Park, Kyu Hwan Oh, Heung Nam Han
FE analysis of the sensitivity of friction calibration curves to dimensional changes in a ring compression test
Jeong Hoon Noh, Jeong Min Seo, Beong Bok Hwang
Development of compacted vermicular graphite cast iron for railway brake discs
Choong-Hwan Lim, Byeong-Choon Goo
Low cycle fatigue properties and an energy-based approach for as-extruded AZ31 magnesium alloy
S. H. Kwon, K. S. Song, K. S. Shin, S. I. Kwun
RETRACTED ARTICLE: A study on the microstructure of precipitation strengthened B2-ordered NiAl
Chang-Sup Oh, Chang-Suk Han
Effect of misch-metal substitution on structure and hydrogen desorption characteristics of Ti0.16Zr0.05Cr0.22V0.57 alloy
B. K. Singh, Jeong-Hyun Yoo, Won-Baek Kim, K. S. Bartwal, Sung-Wook Cho
Electrostatic interaction of multi-walled carbon nanotubes composites with CdTe and CdSe nanoparticles
Mohammad Mahbub Rabbani, Dukeun Kim, Hyun-Chul Kim, Chang Hyun Ko, Dae-Geun Nam, Young Moon Yu, Yeong Do Park, Weontae Oh
Properties and rapid consolidation of nanocrystalline 8MoSi2-Si3N4 by high frequency induction heated sintering
Na-Ra Park, In-Yong Ko, Jin-Kook Yoon, Jung-Mann Doh, In-Jin Shon
Properties and rapid consolidation of nanostructured NiTi by pulsed current activated sintering
Wonbaek Kim, Na-Ri Kim, In-Yong Ko, Sung-Wook Cho, Je-Shin Park, In-Jin Shon
Synthesis of Bi-Sb-Te thermoelectric material by the plasma arc discharge process
Gil-Geun Lee, Dong-Youl Lee, Gook-Hyun Ha
Effects of dew point on selective oxidation of TRIP steels containing Si, Mn, and B
Suk-Kyu Lee, Jong-Sang Kim, Jin-Won Choi, Namhyun Kang, Kyung-Mox Cho
Evaluation of electrodeposited ternary Ni-alloys for thermal stability
Myong Jin Kim, Joung Soo Kim, Dong Jin Kim, Hong Pyo Kim
Metal dusting behavior of 321 stainless steel: Effects of edge and corner
Chia-Hao Chang, Wen-Ta Tsai
The effect of post-heat treatment on the ion dissolution behavior of nanotubular titanium alloys
Viswanathan S. Saji, Han Cheol Choe
Surface modification by carbon ion implantation for the application of ni-based amorphous alloys as bipolar plate in proton exchange membrane fuel cells
Min-Uk Kim, Do-Hyang Kim, Seung-hee Han, Eric Fleury, Hyun-Kwang Seok, Pil-Ryung Cha, Yu-Chan Kim
Micromechanics-based strain hardening model in consideration of dislocation-precipitate interactions
Ji Hoon Kim, Myoung-Gyu Lee, Daeyong Kim, R. H. Wagoner
Effect of pore size on the high temperature oxidation of Ni-Fe-Cr-Al porous metal
Sung-Hwan Choi, Song-Yi Kim, Jung-Yeul Yun, Young-Min Kong, Byoung-Kee Kim, Kee-Ahn Lee
Growth optimization of double-walled carbon nanotubes yielding precisely designed structures
Byeong-Joo Lee, Jin-Ju Kim, Eui-Chul Shin, Goo-Hwan Jeong
Effects of precursors of glass material on the characteristics of silver-glass composite powders prepared by spray pyrolysis
Y. N. Ko, J. H. Kim, Y. J. Hong, H. Y. Koo, Y. C. Kang, H. M. Lee, J. Y. Yun, B. K. Kim
Aspects relating to stability of modified passive stratum on TiO2 nanostructure
Daniela Ionita, Anca Mazare, Diana Portan, Ioana Demetrescu
Effect of Dy on the microstructural and magnetic properties of an Nd-Fe-B strip-cast alloy
Tae-Hoon Kim, Seong-Rae Lee, Dong-Hwan Kim, Tae-Suk Jang
Influence of the interface temperature and strain gradients on the impact energy model of a soft particle on a hard substrate during kinetic spraying
Youlgwun Ji, Gyuyeol Bae, Kicheol Kang, Changhee Lee
Inclusions nucleating intragranular polygonal ferrite and acicular ferrite in low alloyed carbon manganese steel welds
Kyung-Tae Park, Si Woo Hwang, Jung Hoon Ji, Chang Hee Lee
The effects of electron beam irradiation direction on mechanical properties and microstructural characteristics of thick Al 5052 alloy plate
In-Ho Kim, Byong-Sun Chun, Soon-Jik Hong