Ausgabe 4/2013
Inhalt (34 Artikel)
Effect of Zr addition on phase transformation and precipitation in B-added hot stamping steel
Moon-Jo Kim, Hoon-Hwe Cho, Sung-Hwan Kim, Seung Man Nam, Seung-Ha Lee, Man-been Moon, Heung Nam Han
Effect of V addition on hardness and electrical conductivity in Cu-Ni-Si alloys
S. Z. Han, J. H. Gu, J. H. Lee, Z. P. Que, J. H. Shin, S. H. Lim, S. S. Kim
Effects of chemical composition on nanocrystallization kinetics, microstructure and magnetic properties of finemet-type amorphous alloys
Hossein Asghari Shivaee, Alberto Castellero, Paola Rizzi, Paola Tiberto, Hamid Reza Madaah Hosseini, Marcello Baricco
Strain-dependent constitutive analysis of hot deformation and hot workability of T4-treated ZK60 magnesium alloy
Hui Yu, Huashun Yu, Guanghui Min, Sung Soo Park, Bong Sun You, Young Min Kim
Design of ultrafine eutectic-dendrite composites with enhanced mechanical properties in Fe-based alloy
T. E. Kim, S. W. Sohn, J. M. Park, C. W. Bang, W. T. Kim, D. H. Kim
In Situ fracture observation and fracture toughness analysis of pearlitic graphite cast irons with different nodularity
Seung Youb Han, Seok Su Sohn, Sang Yong Shin, Sunghak Lee, Yong Chan Suh
Factors influencing fatigue crack propagation behavior of austenitic steels
Sangshik Kim, Jaeki Kwon, Youngju Kim, Wookil Jang, Soongi Lee, Jongkyo Choi
Residual stress analysis of an aircraft landing gear part using neutron diffraction
Eunjoo Shin, Baek Seok Seong, Cheul Muu Sim
Solidification kinetics of a near eutectic Al-Si alloy, unmodified and modified with Sr
R. Aparicio, G. Barrera, G. Trapaga, M. Ramirez-Argaez, C. Gonzalez-Rivera
Numerical modeling of stray current corrosion of ductile iron pipe induced by foreign cathodic protection system
SeonYeob Li, Young-Geun Kim
Imitating seasonal temperature fluctuations for the H2S corrosion of 304L and 316L austenitic stainless steels
A. Davoodi, M. Babaiee, M. Pakshir
Thermal desorption spectroscopy study of the interaction of hydrogen with TiC precipitates
D. Pérez Escobar, E. Wallaert, L. Duprez, A. Atrens, K. Verbeken
Strain hardening model of pure titanium considering effects of deformation twinning
Kwanghyun Ahn, Hoon Huh, Jonghun Yoon
Rheological behavior of molten Al-SiC slurries and comparison of their behavior with metallic slurries
D. Sohrabi Baba Heidary, F. Akhlagh
Combination of TEM and 3D atom probe study of microstructure and alloy carbide in a Nb-V micro-alloyed steel tempered at 650 °C
Qing-dong Liu, Wen-qing Liu, Shi-jin Zhao
Effect of multi-temperature aging on the characterization of aluminum based castings heat treated using fluidized bed technique
Kh. A. Ragab, A. M. Samuel, A. M. A. Al-Ahmari, F. H. Samuel, H. W. Doty
Electrodeposition, characterization and long term stability of NiW and NiWZn coatings on copper substrate in alkaline solution
Yavuz Sürme, A. Ali Gürten, Kadriye Kayakırılmaz
Characterization of Ni-W solid solution alloy powders and sintered compacts synthesized via mechanically activated hydrogen reduction of NiO-WO3 mixtures
Aziz Genç, M. Lütfi Öveçoǧlu, Servet Turan
Electroless copper electrolytes and its surface characteristics for semiconductor interconnects
Hong-Kee Lee, Jin-Young Hur
Effects of atmospheric pressure plasma surface treatments on the patternability and electrical property of screen-printed Ag nanopaste
Young-Chul Lee, Jong-Woong Kim, Jeong-Won Yoon, Cheol-Woong Yang, Yongil Kim, Seung-Boo Jung
Effect of vibration on microstructures and mechanical properties of 304 stainless steel GTA welds
Chih-Chun Hsieh, Chien-Hong Lai, Weite Wu
Fabrication of Co-doped ZnO nanorods for spintronic devices
Ameer Azam, Faheem Ahmed, Sami S. Habib, Zishan H. Khan, Numan A. Salah
Formation of an interstitially alloyed phase in Mg/C60 composite
Jaehyuck Shin, Sock-yeon Yoon, Hyunjoo Choi, Seeun Shin, Donghyun Bae
Hydrothermal synthesis of Li2MnSiO4: Mechanism and influence of precursor concentration on electrochemical properties
Jintae Hwang, Sungbin Park, Changkyoo Park, Wonil Cho, Ho Jang
TiO2/SiOx core-shell nanowires generated by heating the multilayered substrates
Han Gil Na, Dong Sub Kwak, Yong Jung Kwon, Hong Yeon Cho, Chongmu Lee, Hyoun Woo Kim
Submicron-size patterning on the sapphire substrate prepared by nanosphere lithography and nanoimprint lithography techniques
Chun-Ming Chang, Ming-Hua Shiao, Donyau Chiang, Chin-Tien Yang, Mao-Jung Huang, Wen-Jeng Hsueh
NiCo sensing layer for enhanced signals in planar hall effect sensors
Jaein Lim, Brajalal Sinha, Torati Sri Ramulu, KunWoo Kim, Dong-Young Kim, CheolGi Kim
Improvement of hydrogen-storage properties of MgH2 by addition of Ni and Ti via reactive mechanical grinding and a rate-controlling step in its dehydriding reaction
Myoung Youp Song, Young Jun Kwak, Seong Ho Lee, Hye Ryoung Park, Byoung-Goan Kim
Nickel-based layered double hydroxide from guest vanadium oxide anions
Hae Woong Park, Ji Su Chae, Sun-Min Park, Kwang-Bum Kim, Kwang Chul Roh
Fabrication of Fe-Ti alloys by pulsed current-assisted reaction from iron, manganese and titanium oxide or titanium hydride
Seong-Hyeon Hong, Myoung Youp Song
Retraction note: Microstructural evolution of AA7449 aerospace alloy refined by intensive shearing
R. Haghayeghi
Erratum to: Growth Behavior of Cubic Boron Nitride (cBN) Phase in B-C-N Film Deposited on Si Substrate with Non-Uniform Ion Flux
Seung-Min Lee, Tae-Yeon Seong, Wook-Seong Lee, Young-Joon Baik, Jong-Keuk Park