nach oben

Erschienen in:

2019 | OriginalPaper | Buchkapitel

Modeling and Dynamic Analysis of Adjustable Axial Flow Divider

verfasst von : D. L. Karelin, A. V. Boldyrev, A. M. Belousov

Erschienen in: Proceedings of the 4th International Conference on Industrial Engineering

Verlag: Springer International Publishing

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The use of an axial divider as a part of the hydrostatic transmission makes it possible to realize the torque regulation of the motorized wheel due to pressure dynamics without increasing the flow of working fluid and also to simplify the control system. This paper is concerned with mathematical modeling and dynamic analysis of an axial adjustable volumetric flow divider. The model was developed using the equation of a flow divider’s section displacement, the equation of torque on the shaft of the flow divider’s section, and the equation of theoretical consumption of the divider’s section. The Runge–Kutta method of the fourth order with a fixed step was used to solve the equation. Transient dynamic characteristics were obtained for the cases of displacement changes of the divider section.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel Longitudinal Fin Effect on Effectiveness of Double Pipe Heat Exchanger

Nächstes Kapitel Study of Combustion Stroke of Double-Chamber Explosive Gas Forming Device

Kugi A, Schlacher K, Aizetmuller H, Hirmann G (2000) Modeling and simulation of a hydrostatic transmission with variable-displacement pump. Math Comput Simul 53:409–414CrossRef

Cidras J, Carillo C (2000) Regulation of synchronous generators by means of hydrostatic transmission. IEEE Trans Power Syst 2:771–778CrossRef

Akkaya AV (2006) Effect of bulk modulus on performance of a hydrostatic transmission control system. Sadhana 31:543–556CrossRef

Rabbo SA, Tutunji T (2007) Identification and analysis of hydrostatic transmission system. Int J Adv Manuf Technol 37:221–229. https://doi.org/10.1007/s00170-007-0966-3CrossRef

Ho TH, Ahn KK (2010) Modeling and simulation of hydrostatic transmission system with energy regeneration using hydraulic accumulator. J Mech Sci Technol 24:1163–1175. https://doi.org/10.1007/s12206-010-0313-8CrossRef

Ho TH, Ahn KK (2013) Velocity control of a secondary controlled closed-loop hydrostatic transmission system using an adaptive fuzzy sliding mode controller. J Mech Sci Technol 27:875–884. https://doi.org/10.1007/s12206-012-1237-2CrossRef

Comellas M, Pijuan J, Potau X, Nogues M, Roca J (2012) Analysis of a hydrostatic transmission driveline for its use in off-road multiple axle vehicles. J Terrramech 49:245–254. https://doi.org/10.1016/j.jterra.2012.07.003CrossRef

Comellas M, Pijuan J, Potau X, Nogues M, Roca J (2013) Efficiency sensitivity analysis of a hydrostatic transmission for an off-road multiple axle vehicle. Int J Automot Technol 14:151–161. https://doi.org/10.1007/s12239-013-0017-zCrossRef

Skorek G (2013) Energy efficiency of a hydrostatic drive with proportional control compared with volumetric control. Pol Marit Res 3:14–19. https://doi.org/10.2478/pomr-2013-0030CrossRef

10.

Kim DM, Kim SC, Noh DK, Jang JS (2015) Jerk phenomenon of the hydrostatic transmission through the experiment and analysis. Int J Automot Technol 16:783–790. https://doi.org/10.1007/s12239-015-0079-1CrossRef

11.

Sun H, Aschemann H (2016) A backstepping sliding mode control for a hydrostatic transmission with unknown disturbances. IFAC-PapersOnLine 49(18):879–884. https://doi.org/10.1016/j.ifacol.2016.10.277CrossRef

12.

Zeman P, Kemmetmuller W, Kugi A (2016) Model predictive speed control of axial piston motors. IFAC-PapersOnLine 49(18):772–777. https://doi.org/10.1016/j.ifacol.2016.10.259CrossRef

13.

Kim H, Oh K, Ko K, Kim P, Yi K (2016) Modeling, validation and energy flow analysis of a wheel loader. J Mech Sci Technol 30:603–610. https://doi.org/10.1007/s12206-016-0114-9CrossRef

14.

Sun H, Aschemann H (2016) Sliding mode control for a hydrostatic transmission in combination with a sliding mode observer. Math Eng 155–188. https://doi.org/10.1007/978-3-319-31539-3_6

15.

Mahato AC, Ghoshal SK, Samantaray AK (2017) Energy saving of a hydrostatic drive system by incorporating soft switch. J Braz Soc Mech Sci Eng 39:1929–1945. https://doi.org/10.1007/s40430-017-0739-3CrossRef

Titel: Modeling and Dynamic Analysis of Adjustable Axial Flow Divider
verfasst von: D. L. Karelin
A. V. Boldyrev
A. M. Belousov
Verlag: Springer International Publishing
Buch: Proceedings of the 4th International Conference on Industrial Engineering
Print ISBN: 978-3-319-95629-9

Electronic ISBN: 978-3-319-95630-5

Copyright-Jahr: 2019
DOI: https://doi.org/10.1007/978-3-319-95630-5_64

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht