nach oben

Environmental Earth Sciences

Erschienen in:

01.02.2016 | Original Article

Modeling the effect of freezing and thawing for sedimentary rocks

verfasst von: Ersin Kolay

Erschienen in: Environmental Earth Sciences | Ausgabe 3/2016

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Engineering parameters of rocks mostly depend on internal properties such as mineralogical composition and texture. Physical and chemical processes can cause changes in these engineering parameters. Freeze–thaw is one of the most detrimental phenomena affecting rock properties. This study focuses on the effect of freeze–thaw cycles on the engineering properties of sedimentary rocks. The degree of alteration in the rock, type of cement and the presence of fossils were decisive on rock disintegration during freeze–thaw cycles. Models from two different studies that investigated the weathering behavior under freeze–thaw cycles were applied to the test results of this study. Simple and multiple regression analyses were performed on the test results to predict the UCS values of rocks after 25 cycles, using the results of simply applicable tests at the initial conditions without having to conduct tedious and destructive freeze–thaw tests.

Vorheriger Artikel Chemical composition and source identification of rainwater constituents at an urban site in Xi’an

Nächster Artikel Design and implementation of WebGIS technologies in evaluation of erosion intensity in the municipality of NIS (Serbia)

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Akin M, Ozsan A (2011) Evaluation of the long-term durability of yellow travertine using accelerated weathering tests. Bull Eng Geol Environ 70:101–114CrossRef

Altindag R, Alyildiz IS, Onargan T (2004) Mechanical property degradation of ignimbrite subjected to recurrent freeze–thaw cycles. Int J Rock Mec Min Sci 41:1023–1028CrossRef

Anon (1979) Classification of rocks and soils for engineering geological mapping. Part I—rock and soil materials. Bull Int Assoc Eng Geol 19:364–371CrossRef

ASTM (2002) Standard test method for unconfined strength of intact rock core specimens. ASTM Standard D2938-95

Bayram F (2012) Predicting mechanical strength loss of natural stones after freeze–thaw in cold regions. Cold Reg Sci Tech 83–84:98–102CrossRef

Bell FG (2004) Engineering geology and constraction. Spone Press, New Jersey

Bieniawski ZT (1975) The point load test in geotechnical practice. Eng Geol 9:1–11CrossRef

Binal A (2009) A new laboratory rock test based on freeze–thaw using a steel chamber. Q J Eng Geol Hydrogeol 42:179–198CrossRef

Blatt H (1982) Sedimentary Petrology. W.H. Freeman and Company, San Francisco

Chen CH, Yeung MR, Mori N (2004) Effect of water saturation on deterioration of welded tuff due to freeze–thaw action. Cold Reg Sci Tech 38:127–136CrossRef

Cobanoglu I, Celik SB (2012) Determination of strength parameters and quality assessment of Denizli travertines (SW Turkey). Eng Geol 129–130:38–47CrossRef

Dick JA, Shakoor A, Wells N (1994) A geological approach toward developing a mudrock-durability classification system. Can Geotech J 34:17–27CrossRef

Dunham RJ (1962) Classification of carbonate rocks according to depositional texture. In: Ham WE (ed) Classification of carbonate rocks. AAPG Bull, Memoir 1, Tulsa, OK, pp 108–121

Erguler ZA, Shakoor A (2009) Relative contribution of various climatic processes in disintegration of clay-bearing rocks. Eng Geol 108:36–42CrossRef

Erguvanli K (1995) Engineering Geology. Sec Publication, Istanbul (in Turkish)

Fisher RV (1961) Proposed classification of volcaniclastic sediments and rocks. Geol Soc Amer Bull 72:1409–1414CrossRef

Franklin JA, Chandra R (1972) The slake durability test. Int J Rock Mec Min Sci 9:325–341CrossRef

Gokceoglu C, Ulusay R, Sonmez H (2000) Factor effecting the durability of selected weak and clay-bearing rocks from Turkey, with particular emphasis on the influence of the number of drying and wetting cycles. Eng Geol 57:215–237CrossRef

Grossi CM, Brimblecombe P, Harris I (2007) Predicting long term freeze–thaw risks on Europe built heritage and archaeological sites in a changing climate. Sci Total Environ 377(2):273–281CrossRef

Hale PA, Shakoor A (2003) A laboratory investigation of the effect of cyclic heating and cooling, wetting and drying, and freezing and thawing on the comprehensive strength of selected sandstones. Environ Eng Geosci 9(2):117–130CrossRef

Hoek E, Brown ET (1980) Underground excavations in rock. Institution of Mining and Metallurgy, Stephen Austin and Sons Ltd., Hertford

ISRM (2007) The complete ISRM suggested methods for rock characterization, testing and monitoring: 1974–2006. In: Ulusay R, Hudson JA (eds) Suggested methods prepared by the commission on testing methods. International Society for Rock Mechanics (ISRM), Ankara

Jamshidi A, Nikudel MR, Khamehchiyan M (2013) Predicting the long-term durability of building stones against freeze–thaw using a decay function model. Cold Reg Sci Tech 92:29–36CrossRef

Kadane JB, Lazar NA (2004) Methods and criteria for model selection. J Am Stat Assoc 99:279–290CrossRef

Kolay E, Kayabali K (2006) Investigation of the effect of aggregate shape and surface roughness on the slake durability index using the fractal dimension approach. Eng Geol 86:271–284CrossRef

Larsen TD, Cady PD (1969) Identification of frost susceptible particles in concrete aggregates. National Cooperative Research Program, Highway Research Board, Washington DC, Report 66

Lienhart DA (1988) The geographic distribution of intensity and frequency of freeze–thaw cycles. Bull Assoc Eng Geol 25(4):465–469

Mallows CL (1973) Some comments on C_p. Technometrics 15:661–675

Mutlutürk M, Altindag R, Türk G (2004) A decay function model for the integrity loss of rock when subjected to recurrent cycles of freezing–thawing and heating–cooling. Int J Rock Mec Min Sci 41:237–244CrossRef

Ozbek A (2014) Investigation of the effects of wetting–drying and freezing–thawing cycles on some physical and mechanical properties of selected ignimbrites. Bull Eng Geol Environ 73:595–609CrossRef

Pettijohn FJ, Potter PE, Siever R (1987) Sand and sandstone, 2nd edn. Springer, New York

Rahn PH (1996) Engineering Geology. Prentice-Hall, New York

SAS (1998) SAS Institute Inc. SAS/STAT user’s guide, release 7.0 ed

Schmid R (1981) Descriptive nomenclature and classification of pyroclastic deposits and fragment: recommendations of the IUGS subcommissions on the systematics of igneous rocks. Geology 9:41–43CrossRef

Tan X, Chen W, Yang J, Cao J (2011) Laboratory investigations on the mechanical properties degradation of granite under freeze–thaw cycles. Cold Reg Sci Tech 68:130–138CrossRef

Temur S (1995) Data analysis in geology. Selçuk University publications, Konya (in Turkish)

Topal T, Sozmen B (2003) Deterioration mechanisms of tuffs in Midas monument. Eng Geol 68:201–223CrossRef

TSE (2011) Natural stone test methods—determination of frost resistance (TS EN 12371). Institute of Turkish Standards (TSE), Ankara

Zhang SJ, Lai YM, Zhang XF, Pu YB, Yu WB (2004) Study on the damage propagation of surrounding rock from a cold-region tunnel under freeze–thaw cycle condition. Tunn Undergr Space Technol 19:295–302CrossRef

Titel: Modeling the effect of freezing and thawing for sedimentary rocks
verfasst von: Ersin Kolay
Publikationsdatum: 01.02.2016
Verlag: Springer Berlin Heidelberg
Erschienen in: Environmental Earth Sciences / Ausgabe 3/2016
Print ISSN: 1866-6280
Elektronische ISSN: 1866-6299
DOI: https://doi.org/10.1007/s12665-015-5005-3

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 3/2016

Salt bursting tests on volcanic tuff rocks from Mexico

An attempt to understand the behavior of dissolved organic carbon in coastal aquifers of Pondicherry region, South India

Synopsis of geo-environmental hazards in Hail region, Saudi Arabia using remote sensing

Use of Brillouin optical time domain reflectometry to monitor soil-cave and sinkhole formation

The effects of artificial recharge of groundwater on controlling land subsidence and its influence on groundwater quality and aquifer energy storage in Shanghai, China

Application of extreme learning machine for prediction of aqueous solubility of carbon dioxide