nach oben

Erschienen in:

2020 | OriginalPaper | Buchkapitel

6. Modelling Flows in Lubrication

verfasst von : Andreas Almqvist, Francesc Pérez-Ràfols

Erschienen in: Modeling and Simulation of Tribological Problems in Technology

Verlag: Springer International Publishing

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

This chapter introduces the reader to lubrication theory and describes the governing equations, models and methods that can be used to simulate various types of lubricated systems. It starts with an introduction to the tribological contact and to the different lubrication regimes. The basis for the classical lubrication theory is then given and thereafter follows a presentation of how to obtain the Reynolds equation by means of scaling and asymptotic analysis of the Navier–Stokes equations. After having obtained the Reynolds equation, a quite elaborate presentation of cavitation algorithms is given. It includes discretisation and presents the analytical solution for a pocket bearing as a benchmark model problem. Then, the concept of homogenisation of surface roughness is introduced. This starts from the simplest iso-viscous and incompressible case, expands to include compressibility with a constant bulk modulus constitutive relation and then also addresses the case of ideal gases. Thereafter, the relation between homogenised coefficients and the Patir and Cheng flow factors is described and finally it is shown how to incorporate the effect of mixed lubrication into the model.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 340 Zeitschriften

aus folgenden Fachgebieten:

Bauwesen + Immobilien
Business IT + Informatik
Finance + Banking
Management + Führung
Marketing + Vertrieb
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel Emergent Properties from Contact Between Rough Interfaces

Nächstes Kapitel Contact Mechanics of Rubber and Soft Matter

Ahmed, S., Goodyer, C. E., & Jimack, P. K. (2012). An efficient preconditioned iterative solution of fully-coupled elastohydrodynamic lubrication problems. Applied Numerical Mathematics, 62(5), 649–663. https://doi.org/10.1016/j.apnum.2012.02.002.MathSciNetMATHCrossRef

Almqvist, A. (2011). Homogenization of the Reynolds equation governing hydrodynamic flow in a rotating device. Journal of Tribology, 133(2), 021705. https://doi.org/10.1115/1.4003650.CrossRef

Almqvist, A., & Dasht, J. (2006). The homogenization process of the Reynolds equation describing compressible liquid flow. Tribology International, 39(9), 994–1002. ISSN 0301-679X. https://doi.org/10.1016/j.triboint.2005.09.036.CrossRef

Almqvist, A., & Wall, P. (2016). Modelling cavitation in (elasto)hydrodynamic lubrication. In P. H. Darji (Eds.), Advances in tribology. Rijeka: IntechOpen. https://doi.org/10.5772/63533.

Almqvist, A., Essel, E. K., Persson, L. E., & Wall, P. (2007a). Homogenization of the unstationary incompressible Reynolds equation. Tribology International, 40(9), 1344–1350. ISSN 0301-679X. https://doi.org/10.1016/j.triboint.2007.02.021.CrossRef

Almqvist, A., Sahlin, F., Larsson, R., & Glavatskih, S. (2007b). On the dry elasto-plastic contact of nominally flat surfaces. Tribology International, 40(4), 574–579. ISSN 0301-679X. https://doi.org/10.1016/j.triboint.2005.11.008.CrossRef

Almqvist, A., Fabricius, J., Spencer, A., & Wall, P. (2011). Similarities and differences between the flow factor method by patir and cheng and homogenization. Journal of Tribology, 133(3), 031702. https://doi.org/10.1115/1.4004078.CrossRef

Almqvist, A., Fabricius, J., & Wall, P. (2012). Homogenization of a Reynolds equation describing compressible flow. Journal of Mathematical Analysis and Applications, 390(2), 456–471. ISSN 0022-247X. https://doi.org/10.1016/j.jmaa.2012.02.005.MathSciNetMATHCrossRef

Almqvist, A., Spencer, A., & Wall, P. (2013). Matlab routines solving a linear complementarity problem appearing in lubrication with cavitation. http://www.mathworks.com/matlabcentral/fileexchange/41484.

Almqvist, A., Fabricius, J., Larsson, R., & Wall, P. (2014). A new approach for studying cavitation in lubrication. Journal of Tribology, 136(1), 011706-1–011706-6. https://doi.org/10.1115/1.4025875.CrossRef

Ausas, R. F., Jai, M., & Buscaglia, G. C. (2009). A mass-conserving algorithm for dynamical lubrication problems with cavitation. Journal of Tribology, 131(3):031702. https://doi.org/10.1115/1.3142903.CrossRef

Bayada, G., & Chambat, M. (1988). New models in the theory of the hydrodynamic lubrication of rough surfaces. Journal of Tribology, Transactions of the ASME, 110(3), 402–407. ISSN 0742-4787.

Bayada, G., Martin, S., & Vázquez, C. (2005a). An average flow model of the Reynolds roughness including a mass-flow preserving cavitation model. Journal of Tribology, 127(4), 793–802. https://doi.org/10.1115/1.2005307.CrossRef

Bayada, G., Martin, S., & Vazquez, C. (2005b). Two-scale homogenization of a hydrodynamic Elrod-Adams model. Asymptotic Analysis, 44, 75–110.MathSciNetMATH

Bayada, G., Cid, B., García, G., & Vázquez, C. (2013). A new more consistent Reynolds model for piezoviscous hydrodynamic lubrication problems in line contact devices. Applied Mathematical Modelling, 37(18–19), 8505–8517. https://doi.org/10.1016/j.apm.2013.03.072.MathSciNetMATHCrossRef

Bertocchi, L., Dini, D., Giacopini, M., Fowell, M. T., & Baldini, A. (2013). Fluid film lubrication in the presence of cavitation: A mass-conserving two-dimensional formulation for compressible, piezoviscous and non-Newtonian fluidsbaya. Tribology International, 67, 61–71. ISSN 0301-679X. https://doi.org/10.1016/j.triboint.2013.05.018.CrossRef

Bolander, N. W., Steenwyk, B. D., Sadeghi, F., & Gerber, G. R. (2005). Lubrication regime transitions at the piston ring-cylinder liner interface. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 219(1), 19–31. https://doi.org/10.1243/135065005X9664.CrossRef

Boukrouche, M., & Bayada, G. (1993). Mathematical model. Existence and uniqueness of cavitation problems in porous journal bearing. Nonlinear Analysis: Theory, Methods & Applications, 20(8), 895–920. https://doi.org/10.1016/0362-546X(93)90084-6.MathSciNetMATHCrossRef

Buresti, G. (2015). A note on stokes’ hypothesis. Acta Mechanica, 226(10), 3555–3559. ISSN 1619-6937. https://doi.org/10.1007/s00707-015-1380-9.MathSciNetMATHCrossRef

Cottle, R. W., Pang, J. S., & Stone, R. E. (2009). The linear complementarity problem. Report No. 60. Philadelphia, PA: SIAM.

Dowson, D., & Higginson, G. R. (1966). Elasto-hydrodynamic lubrication: The fundamentals of roller or gear lubrication. Oxford: Pergamon Press.

Elrod, H. G. (1981). A cavitation algorithm. Journal of Tribology, 103, 350–354.

Elrod, H. G., & Adams, M. L. (1975). A computer program for cavitation and starvation problems. In D. Dowson, M. Godet, & C. M. Taylor (Eds.), Cavitation and related phenomena in lubrication (pp. 37–43). London: Mechanical Engineering Publications.

Evans, H. P., Elcoate, C. D., Hughes, T. G., & Snidle, R. W. (2001). Transient elastohydrodynamic analysis of rough surfaces using a novel coupled differential deflection method. Proceedings of the Institution of Mechanical Engineers Part J, 215, 319–337.CrossRef

Evans, L. C. (2010). Graduate studies in mathematics providence. In Partial differential equations (2nd ed., Vol. 19). Rhode Island: American Mathematical Society.

Fabricius, J., Koroleva, Y. O., & Wall, P. (2014). A rigorous derivation of the time-dependent reynolds equation. Asymptotic Analysis, 84, 103–121.MathSciNetMATH

Floberg, L. (1960). The two-groove journal bearing, considering cavitation. Technical Report 231, Institute of Machine Elements, Chalmers University of Technology, Gothenburg, Sweden.

Floberg, L. (1961). Lubrication of two cylinder surfaces, considering cavitation. Technical Report 232, Institute of Machine Elements, Chalmers University of Technology, Gothenburg, Sweden.

Fowell, M., Olver, A. V., Gosman, A. D., Spikes, H. A., & Pegg, I. (2007). Entrainment and inlet suction: Two mechanisms of hydrodynamic lubrication in textured bearings. Journal of Tribology, 129(2), 336–347. https://doi.org/10.1115/1.2540089.CrossRef

Giacopini, M., Fowell, M. T., Dini, D., & Strozzi, A. (2010). A mass-conserving complementarity formulation to study lubricant films in the presence of cavitation. Journal of Tribology, 132(4), 041702. https://doi.org/10.1115/1.4002215.CrossRef

Greenwood, J. A., & Tripp, J. H. (1970). The contact of two nominally flat rough surfaces. Proceedings of the Institution of Mechanical Engineers, 185(48), 625–633. ISSN 0020-3483.

Gustafsson, I., Rajagopal, K. R., Stenberg, R., & Videman, J. (2015). Nonlinear Reynolds equation for hydrodynamic lubrication. Applied Mathematical Modelling, 39(17), 5299–5309. ISSN 0307-904X. https://doi.org/10.1016/j.apm.2015.03.028.MathSciNetCrossRef

Habchi, W. (2018). Finite element modeling of elastohydrodynamic lubrication problems. https://doi.org/10.1002/9781119225133.MATHCrossRef

Habchi, W. (2019). A schur-complement model-order-reduction technique for the finite element solution of transient elastohydrodynamic lubrication problems. Advances in Engineering Software, 127, 28–37. https://doi.org/10.1016/j.advengsoft.2018.10.007.CrossRef

Holmes, M. A. J. (2002). Transient analysis of the point contact elastohydrodynamic lubrication problem using coupled solution methods. Ph.D. thesis, Cardiff University.

Holmes, M. J. A., Evans, H. P., Hughes, T. G., & Snidle, R. W. (2003a). Transient elastohydrodynamic point contact analysis using a new coupled differential deflection method part 1: Theory and validation. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 217(4), 289–304. https://doi.org/10.1243/135065003768618641.CrossRef

Holmes, M. J. A., Evans, H. P., Hughes, T. G., & Snidle, R. W. (2003b). Transient elastohydrodynamic point contact analysis using a new coupled differential deflection method part 2: Results. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 217(4), 305–322. https://doi.org/10.1243/135065003768618650.CrossRef

Hooke, C. J., & Li, K. Y. (2006). Rapid calculation of the pressures and clearances in rough, elastohydrodynamically lubricated contacts under pure rolling. part 1: Low amplitude, sinusoidal roughness. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 220(6), 901–913. https://doi.org/10.1243/09544062C03405.

Jakobsson, B., & Floberg, L. (1957). The finite journal bearing, considering vaporization. Technical Report 190, Institute of Machine Elements, Chalmers University of Technology, Gothenburg, Sweden.

Liu, S., Wang, Q., & Liu, G. (2000). A versatile method of discrete convolution and FFT (DC-FFT) for contact analyses. Wear, 243(1–2), 101–111. ISSN 0043-1648. https://doi.org/10.1016/S0043-1648(00)00427-0.CrossRef

Liu, S., Hua, D., Chen, W. W., & Wang, Q. J. (2007). Tribological modeling: Application of fast Fourier transform. Tribology International, 40(8), 1284–1293. ISSN 0301-679X. https://doi.org/10.1016/j.triboint.2007.02.004.CrossRef

Lukkassen, D., Meidell, A., & Wall, P. (2009). Homogenization of some variational problems connected to the theory of lubrication. International Journal of Engineering Science, 47(1), 153–162.MathSciNetMATHCrossRef

Lukkassen, D., Nguetseng, G., & Wall, P. (2002). Two-scale convergence. International Journal of Pure and Applied Mathematics, 2(1), 33–81.MathSciNetMATH

Olsson, K. O. (1965). Cavitation in dynamically loaded bearings. Technical Report 308, Institute of Machine Elements, Chalmers University of Technology, Gothenburg, Sweden.

Olver, A. V., Fowell, M. T., Spikes, H. A., & Pegg, I. G. (2006). ‘inlet suction’, a load support mechanism in non-convergent, pocketed, hydrodynamic bearings. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 220(2), 105–108. 10.1243/13506501JET168. https://doi.org/10.1243/13506501JET168.CrossRef

Patir, N. (1978). A numerical procedure for random generation of rough surfaces. Wear, 47(2), 263–277. ISSN 0043-1648. https://doi.org/10.1016/0043-1648(78)90157-6.CrossRef

Patir, N., & Cheng, H. S. (1978). An average flow model for determining effects of three-dimensional roughness on partial hydrodynamic lubrication. Journal of Tribology, Transactions of the ASME, 100, 12–17.

Patir, N., & Cheng, H. S. (1979). Application of average flow model to lubrication between rough sliding surfaces. Journal of Tribology, Transactions of the ASME, 101, 220–230.

Pérez-Ràfols, E., & Almqvist, A. (2019). Generating randomly rough surfaces with given height probability distribution and power spectrum. Tribology International, 131, 591–604. ISSN 0301-679X. https://doi.org/10.1016/j.triboint.2018.11.020.CrossRef

Pérez-Ràfols, E., Larsson, R., Lundström, T. S., Wall, P., & Almqvist, A. (2016). A stochastic two-scale model for pressure-driven flow between rough surfaces. Proceedings of the Royal Society. Mathematical, Physical and Engineering Sciences, 472(2190), 20160069. https://doi.org/10.1098/rspa.2016.0069.MathSciNetMATHCrossRef

Persson, B. N. J. (2010). Fluid dynamics at the interface between contacting elastic solids with randomly rough surfaces. Journal of Physics Condensed Matter, 22(26). https://doi.org/10.1088/0953-8984/22/26/265004.

Rajagopal, K. R., & Szeri, A. Z. (2003). On an inconsistency in the derivation of the equations of elastohydrodynamic lubrication. Proceedings of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences, 459, 2771–2786.

Reynolds, O. (1886). On the theory of lubrication and its application to Mr. Beauchamps tower’s experiments, including an experimental determination of the viscosity of olive oil. Philosophical Transactions of the Royal Society of London A, 177, 157–234.

Rodhe, S. M., Whitaker, K. W., & McAllister, G. T. (1980). A mixed friction model for dynamically loaded contacts with application to piston ring lubrication. In Surface roughness effects in hydrodynamic and mixed lubrication. ASME Winter Annual Meeting, Chicago (pp. 19–50).

Sahlin, F., Almqvist, A., Larsson, R., & Glavatskih, S. (2007). A cavitation algorithm for arbitrary lubricant compressibility. Tribology International, 40(8), 1294–1300. ISSN 0301-679X. https://doi.org/10.1016/j.triboint.2007.02.009.CrossRef

Sahlin, F., Larsson, R., Marklund, P., Lugt, P. M., & Almqvist, A. (2010a). A mixed lubrication model incorporating measured surface topography. part 1: theory of flow factors. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 224(4), 335–351. https://doi.org/10.1243/13506501JET658.CrossRef

Sahlin, F., Larsson, R., Marklund, P., Lugt, P. M., & Almqvist, A. (2010b). A mixed lubrication model incorporating measured surface topography. Part 2: Roughness treatment, model validation, and simulation. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 224(4), 353–365. https://doi.org/10.1243/13506501JET659.CrossRef

Scaraggi, M., & Carbone, G. (2012). A two-scale approach for lubricated soft-contact modeling: An application to lip-seal geometry. Advances in Tribology. https://doi.org/10.1155/2012/412190.CrossRef

Shirzadegan, M., Almqvist, A., & Larsson, R. (2016). Fully coupled ehl model for simulation of finite length line cam-roller follower contacts. Tribology International, 103, 584–598. https://doi.org/10.1016/j.triboint.2016.08.017.CrossRef

Söderfjäll, M. (2017). Friction in piston ring—Cylinder liner contacts. Ph.D. thesis, Luleå University of Technology, Machine Elements.

Tian, X., & Bhushan, B. (1996). A numerical three-dimensional model for the contact of rough surfaces by variational principle. Journal of Tribology, 118(1), 33–42. ISSN 07424787. https://doi.org/10.1115/1.2837089.CrossRef

Venner, C. H., & Lubrecht, A. A. (2000). Multilevel methods in lubrication. Tribology Series,37.

Vijayaraghavan, D., & Keith Jr, T. G. (1989). Development and evaluation of a cavitation algorithm. STLE Tribology Transactions, 32(2), 225–233.

Vijayaraghavan, D., & Keith Jr, T. G. (1990). An efficient, robust, and time accurate numerical scheme applied to a cavitation algorithm. Journal of Tribology, Transactions of the ASME, 112(1), 44–51. ISSN 0742–4787.

Wall, P. (2007). Homogenization of Reynolds equation by two-scale convergence. Chinese Annals of Mathematics—Series B, 28(3), 363–374.MathSciNetMATHCrossRef

Wang, W. Z., Wang, H., Liu, Y. C., Hu, Y. Z., & Zhu, D. (2003). A comparative study of the methods for calculation of surface elastic deformation. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 217(2), 145–154. ISSN 1350-6501. https://doi.org/10.1243/13506500360603570.CrossRef

Woods, C. M., & Brewe, D. E. (1989). The solution of the Elrod algorithm for a dynamically loaded journal bearing using multigrid techniques. Journal of Tribology, 111(2), 302–308.

Zhu, D., Liu, Y., & Wang, Q. (2015). On the numerical accuracy of rough surface ehl solution. Tribology and Lubrication Technology, 71(1), 40–55. https://doi.org/10.1080/10402004.2014.886349.CrossRef

Titel: Modelling Flows in Lubrication
verfasst von: Andreas Almqvist
Francesc Pérez-Ràfols
Verlag: Springer International Publishing
Buch: Modeling and Simulation of Tribological Problems in Technology
Print ISBN: 978-3-030-20376-4

Electronic ISBN: 978-3-030-20377-1

Copyright-Jahr: 2020
DOI: https://doi.org/10.1007/978-3-030-20377-1_6

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Springer Professional "Wirtschaft"