nach oben

Erschienen in:

2019 | OriginalPaper | Buchkapitel

Question of Creation of General Theory of Deep Holes Machining

verfasst von : L. Mironova, L. Kondratenko, V. Terekhov

Erschienen in: Proceedings of the 4th International Conference on Industrial Engineering

Verlag: Springer International Publishing

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The article notes that the development of industry poses the task of creating a general theory of the deep hole machining in the details. It is shown that drilling holes in details largely depends on the dynamic features of the mechanisms and the cutting process. A system of differential equations describing only the longitudinal and torsional oscillations of the cutting part of the tool is given. Using the example of the experiment on drilling holes with a diameter of 16 mm in austenitic, pearlitic steels, the problems associated with the construction of the cutting part of a gun drill, its wear, and the dynamics of the cutting process are shown. In a simplified setting, some features of the hydraulic system of the whole deep drilling machine are described, taking into account the supply of cutting fluid.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel Analysis of Methods for Increase of Soundproofing Structure Efficiency for Noise Reduction During Technological Processes of Machinery Production

Nächstes Kapitel Overhaul-Period Renewal of Cement Kiln Rotary Drive

Terechov VM, Kondratenko LA (1999) A mathematical model of the process of drilling deep holes. Mach Build Mach Reliab 1:55–61

Ee KC, Dillon OW Jr, Jawahir IS (2005) Finite element modeling of residual stresses in machining induced by cutting using a tool with finite edge radius. J Mech 47:1611–1628MATH

Yefimovich IA (2003) Dynamics of cutting forces during insertion. Mech Eng 2:45–47

Kondratyuk OA (2005) The stability of the deep hole drilling process on small rotary indexing machines. J Equip Tools Professionals 6:22–23

Gunay M, Seker U, Sur G (2006) Design and construction of a dynamometer to evaluate the influence of cutting tool rake angle on cutting forces. Mater Des 27:1097–1110CrossRef

Amor Messaond, Claus Weis (2009) Monitiring a deep holl drilling process by nonlinear time series modeling. J Sound Vib 326(3–5):620–630

Terechov VM, Kondratenko LA, Mironova LI (2016) Some dynamic features of interaction the cutting part of the gun drill with the detail. Eng Autom Probl 4:78–84

Granovsky GI, Granovsky VG (1985) Metal cutting. The higher school, Moscow

Klushin MI (1958) Cutting of metals. Mashgiz, Moscow

10.

Kondratenko L, Dmitriev V, Mironova L (2017) Simulation of a drive with a long connecting link. In: 26th international conference vibroengineering. Vibroengineering Procedia, vol 12, pp 231–236. https://doi.org/10.21595/vp.2017.18743CrossRef

11.

Lakirev SG, Deryabin IP (2000) Modelirovaniye obrabotki otverstiy ruzheynymi sverlami i razvertkami (Simulation of hole machining with gun drills and sweeps). Materialy MONPK “Snezhinsk and nauka”, SFTI, pp 107–108

12.

Kondratenko LA, Dmitriev VG, Mironova LI (2017) The method of studying the changes in stresses and velocities of motion in a spindle-shaft system is a technological object. In: The theses of the XXIII international symposium “dynamic and technological problems of mechanics of constructions and continuous media named after I. A.G. Gorshkov”, pp 101–103

13.

Kondratenko LA, Terekhov VM, Mironova LI (2017) About one method of research torsional vibrations of the core and his application in technologies of mechanical engineering. Eng Autom Probl 1:133–137

14.

Kondratenko LA (2005) Vibrations and speed regulation methods of movement of technological objects. MRSU, Moscow

15.

Kondratenko LA (2008) Calculation of velocity variations and stresses in machine assemblies and components. Sputnik, Moscow

16.

Kondratenko L, Mironova L, Terekhov V (2007) Investigation of vibrations during deepholes machining. In: 25th international conference vibroengineering. Vibroengineering Procedia, vol 11, pp 7–11. https://doi.org/10.21595/vp.2017.18285CrossRef

17.

Kondratenko L, Mironova L, Terekhov V (2017) On the question of the relationship between longitudinal and torsional vibrations in the manufacture of holes in the details. In: 26th conference in St. Petersburg, June, 2017. Vibroengineering Procedia, vol 12, pp 6–11. https://doi.org/10.21595/vp.2017.18461CrossRef

Titel: Question of Creation of General Theory of Deep Holes Machining
verfasst von: L. Mironova
L. Kondratenko
V. Terekhov
Verlag: Springer International Publishing
Buch: Proceedings of the 4th International Conference on Industrial Engineering
Print ISBN: 978-3-319-95629-9

Electronic ISBN: 978-3-319-95630-5

Copyright-Jahr: 2019
DOI: https://doi.org/10.1007/978-3-319-95630-5_139

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht